Wallbot_CaaS
Dependencies: MPU6050 mbed PID
Fork of BLE_MPU6050_test6_challenge_sb by
projectconfig.h
00001 /* mbed Microcontroller Library 00002 * Copyright (c) 2006-2013 ARM Limited 00003 * 00004 * Licensed under the Apache License, Version 2.0 (the "License"); 00005 * you may not use this file except in compliance with the License. 00006 * You may obtain a copy of the License at 00007 * 00008 * http://www.apache.org/licenses/LICENSE-2.0 00009 * 00010 * Unless required by applicable law or agreed to in writing, software 00011 * distributed under the License is distributed on an "AS IS" BASIS, 00012 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 00013 * See the License for the specific language governing permissions and 00014 * limitations under the License. 00015 */ 00016 00017 #ifndef _PROJECTCONFIG_H_ 00018 #define _PROJECTCONFIG_H_ 00019 00020 #include "blecommon.h" 00021 00022 /*========================================================================= 00023 MCU & BOARD SELCTION 00024 00025 CFG_BOARD is one of the value defined in board.h 00026 -----------------------------------------------------------------------*/ 00027 #define CFG_BOARD BOARD_PCA10001 00028 #define CFG_MCU_STRING "nRF51822" 00029 /*=========================================================================*/ 00030 00031 00032 /*========================================================================= 00033 CODE BASE VERSION SETTINGS 00034 00035 Please do not modify this version number. To set a version number 00036 for your project or firmware, change the values in your 'boards/' 00037 config file. 00038 -----------------------------------------------------------------------*/ 00039 #define CFG_CODEBASE_VERSION_MAJOR 0 00040 #define CFG_CODEBASE_VERSION_MINOR 1 00041 #define CFG_CODEBASE_VERSION_REVISION 0 00042 /*=========================================================================*/ 00043 00044 00045 /*========================================================================= 00046 FIRMWARE VERSION SETTINGS 00047 -----------------------------------------------------------------------*/ 00048 #define CFG_FIRMWARE_VERSION_MAJOR 0 00049 #define CFG_FIRMWARE_VERSION_MINOR 0 00050 #define CFG_FIRMWARE_VERSION_REVISION 0 00051 /*=========================================================================*/ 00052 00053 00054 /*========================================================================= 00055 DEBUG LEVEL 00056 ----------------------------------------------------------------------- 00057 00058 CFG_DEBUG Level 3: Full debug output, any failed assert 00059 will produce a breakpoint for the 00060 debugger 00061 Level 2: ATTR_ALWAYS_INLINE is null, ASSERT 00062 has text 00063 Level 1: ATTR_ALWAYS_INLINE is an attribute, 00064 ASSERT has no text 00065 Level 0: No debug information generated 00066 00067 -----------------------------------------------------------------------*/ 00068 #define CFG_DEBUG (1) 00069 00070 #if (CFG_DEBUG > 3) || (CFG_DEBUG < 0) 00071 #error "CFG_DEBUG must be a value between 0 (no debug) and 3" 00072 #endif 00073 /*=========================================================================*/ 00074 00075 00076 /*========================================================================= 00077 GENERAL NRF51 PERIPHERAL SETTINGS 00078 ----------------------------------------------------------------------- 00079 00080 CFG_SCHEDULER_ENABLE Set this to 'true' or 'false' depending on 00081 if you use the event scheduler or not 00082 00083 -----------------------------------------------------------------------*/ 00084 #define CFG_SCHEDULER_ENABLE false 00085 00086 /*------------------------------- GPIOTE ------------------------------*/ 00087 #define CFG_GPIOTE_MAX_USERS 1 /**< Maximum number of users of the GPIOTE handler. */ 00088 00089 /*-------------------------------- TIMER ------------------------------*/ 00090 #define CFG_TIMER_PRESCALER 0 /**< Value of the RTC1 PRESCALER register. freq = (32768/(PRESCALER+1)) */ 00091 #define CFG_TIMER_MAX_INSTANCE 1 /**< Maximum number of simultaneously created timers. */ 00092 #define CFG_TIMER_OPERATION_QUEUE_SIZE 1 /**< Size of timer operation queues. */ 00093 /*=========================================================================*/ 00094 00095 00096 /*========================================================================= 00097 BTLE SETTINGS 00098 -----------------------------------------------------------------------*/ 00099 00100 #define CFG_BLE_TX_POWER_LEVEL 0 /**< in dBm (Valid values are -40, -20, -16, -12, -8, -4, 0, 4) */ 00101 00102 /*---------------------------- BOND MANAGER ---------------------------*/ 00103 #define CFG_BLE_BOND_FLASH_PAGE_BOND (BLE_FLASH_PAGE_END-1) /**< Flash page used for bond manager bonding information.*/ 00104 #define CFG_BLE_BOND_FLASH_PAGE_SYS_ATTR (BLE_FLASH_PAGE_END-3) /**< Flash page used for bond manager system attribute information. TODO check if we can use BLE_FLASH_PAGE_END-2*/ 00105 #define CFG_BLE_BOND_DELETE_BUTTON_NUM 0 /**< Button to press to delete bond details during init */ 00106 00107 /*------------------------------ SECURITY -----------------------------*/ 00108 #define CFG_BLE_SEC_PARAM_MITM 0 /**< Man In The Middle protection not required. */ 00109 #define CFG_BLE_SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_NONE /**< No I/O capabilities. */ 00110 #define CFG_BLE_SEC_PARAM_OOB 0 /**< Out Of Band data not available. */ 00111 #define CFG_BLE_SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */ 00112 #define CFG_BLE_SEC_PARAM_MAX_KEY_SIZE 16 00113 00114 /*--------------------------------- GAP -------------------------------*/ 00115 #define CFG_GAP_APPEARANCE BLE_APPEARANCE_GENERIC_TAG 00116 #define CFG_GAP_LOCAL_NAME "nRF5x" 00117 00118 #define CFG_GAP_CONNECTION_MIN_INTERVAL_MS 50 /**< Minimum acceptable connection interval */ 00119 #define CFG_GAP_CONNECTION_MAX_INTERVAL_MS 500 /**< Maximum acceptable connection interval */ 00120 #define CFG_GAP_CONNECTION_SUPERVISION_TIMEOUT_MS 4000 /**< Connection supervisory timeout */ 00121 #define CFG_GAP_CONNECTION_SLAVE_LATENCY 0 /**< Slave Latency in number of connection events. */ 00122 00123 #define CFG_GAP_ADV_INTERVAL_MS 25 /**< The advertising interval in miliseconds, should be multiply of 0.625 */ 00124 #define CFG_GAP_ADV_TIMEOUT_S 180 /**< The advertising timeout in units of seconds. */ 00125 /*=========================================================================*/ 00126 00127 00128 /*========================================================================= 00129 VALIDATION 00130 -----------------------------------------------------------------------*/ 00131 #if CFG_BLE_TX_POWER_LEVEL != -40 && CFG_BLE_TX_POWER_LEVEL != -20 && CFG_BLE_TX_POWER_LEVEL != -16 && CFG_BLE_TX_POWER_LEVEL != -12 && CFG_BLE_TX_POWER_LEVEL != -8 && CFG_BLE_TX_POWER_LEVEL != -4 && CFG_BLE_TX_POWER_LEVEL != 0 && CFG_BLE_TX_POWER_LEVEL != 4 00132 #error "CFG_BLE_TX_POWER_LEVEL must be -40, -20, -16, -12, -8, -4, 0 or 4" 00133 #endif 00134 /*=========================================================================*/ 00135 00136 #endif /* _PROJECTCONFIG_H_ */
Generated on Tue Jul 12 2022 18:33:09 by 1.7.2