Diff: Drivers/BSP/STM32746G-Discovery/stm32746g_discovery.h

Revision:

6:e1d9da7fe856

Child:

8:ff634d7a9d9f

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Drivers/BSP/STM32746G-Discovery/stm32746g_discovery.h	Thu Nov 10 09:57:11 2016 +0100
@@ -0,0 +1,342 @@
+/**
+  ******************************************************************************
+  * @file    stm32746g_discovery.h
+  * @author  MCD Application Team
+  * @version V1.1.1
+  * @date    02-June-2016
+  * @brief   This file contains definitions for STM32746G_DISCOVERY's LEDs,
+  *          push-buttons and COM ports hardware resources.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+  
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32746G_DISCOVERY_H
+#define __STM32746G_DISCOVERY_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+#include "cmsis_nvic.h" // MBED
+   
+/** @addtogroup BSP
+  * @{
+  */
+
+/** @addtogroup STM32746G_DISCOVERY
+  * @{
+  */
+      
+/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL
+  * @{
+  */ 
+
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Types STM32746G_DISCOVERY_LOW_LEVEL Exported Types
+  * @{
+  */
+typedef enum 
+{
+  DISCO_LED1 = 0, // MBED
+  LED_GREEN = DISCO_LED1, // MBED
+}Led_TypeDef;
+
+typedef enum 
+{  
+  BUTTON_WAKEUP = 0,
+  BUTTON_TAMPER = 1,
+  BUTTON_KEY = 2
+}Button_TypeDef;
+
+typedef enum 
+{  
+  BUTTON_MODE_GPIO = 0,
+  BUTTON_MODE_EXTI = 1
+}ButtonMode_TypeDef;
+
+typedef enum 
+{
+  COM1 = 0,
+  COM2 = 1
+}COM_TypeDef;
+/**
+  * @}
+  */ 
+
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Constants STM32746G_DISCOVERY_LOW_LEVEL Exported Constants
+  * @{
+  */ 
+
+/** 
+  * @brief  Define for STM32746G_DISCOVERY board
+  */ 
+#if !defined (USE_STM32746G_DISCO)
+ #define USE_STM32746G_DISCO
+#endif
+
+/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_LED
+  * @{
+  */
+
+#define LEDn                             ((uint8_t)1)
+
+#define LED1_GPIO_PORT                   GPIOI
+#define LED1_GPIO_CLK_ENABLE()           __HAL_RCC_GPIOI_CLK_ENABLE()
+#define LED1_GPIO_CLK_DISABLE()          __HAL_RCC_GPIOI_CLK_DISABLE()
+#define LED1_PIN                         GPIO_PIN_1
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_BUTTON
+  * @{
+  */ 
+#define BUTTONn                             ((uint8_t)3) 
+
+/**
+  * @brief Wakeup push-button
+  */
+#define WAKEUP_BUTTON_PIN                   GPIO_PIN_11
+#define WAKEUP_BUTTON_GPIO_PORT             GPIOI
+#define WAKEUP_BUTTON_GPIO_CLK_ENABLE()     __HAL_RCC_GPIOI_CLK_ENABLE()
+#define WAKEUP_BUTTON_GPIO_CLK_DISABLE()    __HAL_RCC_GPIOI_CLK_DISABLE()
+#define WAKEUP_BUTTON_EXTI_IRQn             EXTI15_10_IRQn 
+
+/**
+  * @brief Tamper push-button
+  */
+#define TAMPER_BUTTON_PIN                    GPIO_PIN_11
+#define TAMPER_BUTTON_GPIO_PORT              GPIOI
+#define TAMPER_BUTTON_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOI_CLK_ENABLE()
+#define TAMPER_BUTTON_GPIO_CLK_DISABLE()     __HAL_RCC_GPIOI_CLK_DISABLE()
+#define TAMPER_BUTTON_EXTI_IRQn              EXTI15_10_IRQn
+
+/**
+  * @brief Key push-button
+  */
+#define KEY_BUTTON_PIN                       GPIO_PIN_11
+#define KEY_BUTTON_GPIO_PORT                 GPIOI
+#define KEY_BUTTON_GPIO_CLK_ENABLE()         __HAL_RCC_GPIOI_CLK_ENABLE()
+#define KEY_BUTTON_GPIO_CLK_DISABLE()        __HAL_RCC_GPIOI_CLK_DISABLE()
+#define KEY_BUTTON_EXTI_IRQn                 EXTI15_10_IRQn
+
+#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__)    do { if((__INDEX__) == 0) WAKEUP_BUTTON_GPIO_CLK_ENABLE(); else\
+                                                   if((__INDEX__) == 1) TAMPER_BUTTON_GPIO_CLK_ENABLE(); else\
+												                        KEY_BUTTON_GPIO_CLK_ENABLE(); } while(0)											   
+
+#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__)    (((__INDEX__) == 0) ? WAKEUP_BUTTON_GPIO_CLK_DISABLE() :\
+                                                ((__INDEX__) == 1) ? TAMPER_BUTTON_GPIO_CLK_DISABLE() : KEY_BUTTON_GPIO_CLK_DISABLE())
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_SIGNAL
+  * @{
+  */
+#define SIGNALn                             ((uint8_t)1)
+
+/**
+  * @brief SD-detect signal
+  */
+#define SD_DETECT_PIN                        GPIO_PIN_13
+#define SD_DETECT_GPIO_PORT                  GPIOC
+#define SD_DETECT_GPIO_CLK_ENABLE()          __HAL_RCC_GPIOC_CLK_ENABLE()
+#define SD_DETECT_GPIO_CLK_DISABLE()         __HAL_RCC_GPIOC_CLK_DISABLE()
+#define SD_DETECT_EXTI_IRQn                  EXTI15_10_IRQn
+
+/**
+  * @brief Touch screen interrupt signal
+  */
+#define TS_INT_PIN                           GPIO_PIN_13
+#define TS_INT_GPIO_PORT                     GPIOI
+#define TS_INT_GPIO_CLK_ENABLE()             __HAL_RCC_GPIOI_CLK_ENABLE()
+#define TS_INT_GPIO_CLK_DISABLE()            __HAL_RCC_GPIOI_CLK_DISABLE()
+#define TS_INT_EXTI_IRQn                     EXTI15_10_IRQn
+
+/**
+  * @}
+  */ 
+
+/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_COM
+  * @{
+  */
+#define COMn                             ((uint8_t)1)
+
+/**
+ * @brief Definition for COM port1, connected to USART1
+ */ 
+#define DISCOVERY_COM1                          USART1
+#define DISCOVERY_COM1_CLK_ENABLE()             __HAL_RCC_USART1_CLK_ENABLE()
+#define DISCOVERY_COM1_CLK_DISABLE()            __HAL_RCC_USART1_CLK_DISABLE()
+
+#define DISCOVERY_COM1_TX_PIN                   GPIO_PIN_9
+#define DISCOVERY_COM1_TX_GPIO_PORT             GPIOA
+#define DISCOVERY_COM1_TX_GPIO_CLK_ENABLE()     __HAL_RCC_GPIOA_CLK_ENABLE()
+#define DISCOVERY_COM1_TX_GPIO_CLK_DISABLE()    __HAL_RCC_GPIOA_CLK_DISABLE()
+#define DISCOVERY_COM1_TX_AF                    GPIO_AF7_USART1
+
+#define DISCOVERY_COM1_RX_PIN                   GPIO_PIN_7
+#define DISCOVERY_COM1_RX_GPIO_PORT             GPIOB
+#define DISCOVERY_COM1_RX_GPIO_CLK_ENABLE()     __HAL_RCC_GPIOB_CLK_ENABLE()
+#define DISCOVERY_COM1_RX_GPIO_CLK_DISABLE()    __HAL_RCC_GPIOB_CLK_DISABLE()
+#define DISCOVERY_COM1_RX_AF                    GPIO_AF7_USART1
+
+#define DISCOVERY_COM1_IRQn                     USART1_IRQn
+
+#define DISCOVERY_COMx_CLK_ENABLE(__INDEX__)            do { if((__INDEX__) == COM1) DISCOVERY_COM1_CLK_ENABLE(); } while(0)
+#define DISCOVERY_COMx_CLK_DISABLE(__INDEX__)           (((__INDEX__) == 0) ? DISCOVERY_COM1_CLK_DISABLE() : 0)
+
+#define DISCOVERY_COMx_TX_GPIO_CLK_ENABLE(__INDEX__)    do { if((__INDEX__) == COM1) DISCOVERY_COM1_TX_GPIO_CLK_ENABLE(); } while(0)
+#define DISCOVERY_COMx_TX_GPIO_CLK_DISABLE(__INDEX__)   (((__INDEX__) == 0) ? DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() : 0)
+
+#define DISCOVERY_COMx_RX_GPIO_CLK_ENABLE(__INDEX__)    do { if((__INDEX__) == COM1) DISCOVERY_COM1_RX_GPIO_CLK_ENABLE(); } while(0)
+#define DISCOVERY_COMx_RX_GPIO_CLK_DISABLE(__INDEX__)   (((__INDEX__) == 0) ? DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() : 0)
+
+/* Exported constant IO ------------------------------------------------------*/
+
+#define LCD_I2C_ADDRESS                  ((uint16_t)0x70)
+#define CAMERA_I2C_ADDRESS               ((uint16_t)0x60)
+#define AUDIO_I2C_ADDRESS                ((uint16_t)0x34)
+#define EEPROM_I2C_ADDRESS_A01           ((uint16_t)0xA0)
+#define EEPROM_I2C_ADDRESS_A02           ((uint16_t)0xA6)
+#define TS_I2C_ADDRESS                   ((uint16_t)0x70)
+
+/* I2C clock speed configuration (in Hz) 
+   WARNING: 
+   Make sure that this define is not already declared in other files (ie. 
+   stm32746g_discovery.h file). It can be used in parallel by other modules. */
+#ifndef I2C_SPEED
+ #define I2C_SPEED                       ((uint32_t)100000)
+#endif /* I2C_SPEED */
+
+/* User can use this section to tailor I2Cx/I2Cx instance used and associated 
+   resources */
+/* Definition for AUDIO and LCD I2Cx resources */
+#define DISCOVERY_AUDIO_I2Cx                             I2C3
+#define DISCOVERY_AUDIO_I2Cx_CLK_ENABLE()                __HAL_RCC_I2C3_CLK_ENABLE()
+#define DISCOVERY_AUDIO_DMAx_CLK_ENABLE()                __HAL_RCC_DMA1_CLK_ENABLE()
+#define DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOH_CLK_ENABLE()
+
+#define DISCOVERY_AUDIO_I2Cx_FORCE_RESET()               __HAL_RCC_I2C3_FORCE_RESET()
+#define DISCOVERY_AUDIO_I2Cx_RELEASE_RESET()             __HAL_RCC_I2C3_RELEASE_RESET()
+
+/* Definition for I2Cx Pins */
+#define DISCOVERY_AUDIO_I2Cx_SCL_PIN                     GPIO_PIN_7
+#define DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_PORT           GPIOH
+#define DISCOVERY_AUDIO_I2Cx_SCL_SDA_AF                  GPIO_AF4_I2C3
+#define DISCOVERY_AUDIO_I2Cx_SDA_PIN                     GPIO_PIN_8
+
+/* I2C interrupt requests */
+#define DISCOVERY_AUDIO_I2Cx_EV_IRQn                     I2C3_EV_IRQn
+#define DISCOVERY_AUDIO_I2Cx_ER_IRQn                     I2C3_ER_IRQn
+
+/* Definition for external, camera and Arduino connector I2Cx resources */
+#define DISCOVERY_EXT_I2Cx                               I2C1
+#define DISCOVERY_EXT_I2Cx_CLK_ENABLE()                  __HAL_RCC_I2C1_CLK_ENABLE()
+#define DISCOVERY_EXT_DMAx_CLK_ENABLE()                  __HAL_RCC_DMA1_CLK_ENABLE()
+#define DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_CLK_ENABLE()     __HAL_RCC_GPIOB_CLK_ENABLE()
+
+#define DISCOVERY_EXT_I2Cx_FORCE_RESET()                 __HAL_RCC_I2C1_FORCE_RESET()
+#define DISCOVERY_EXT_I2Cx_RELEASE_RESET()               __HAL_RCC_I2C1_RELEASE_RESET()
+
+/* Definition for I2Cx Pins */
+#define DISCOVERY_EXT_I2Cx_SCL_PIN                       GPIO_PIN_8
+#define DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_PORT             GPIOB
+#define DISCOVERY_EXT_I2Cx_SCL_SDA_AF                    GPIO_AF4_I2C1
+#define DISCOVERY_EXT_I2Cx_SDA_PIN                       GPIO_PIN_9
+
+/* I2C interrupt requests */
+#define DISCOVERY_EXT_I2Cx_EV_IRQn                       I2C1_EV_IRQn
+#define DISCOVERY_EXT_I2Cx_ER_IRQn                       I2C1_ER_IRQn
+
+/* I2C TIMING Register define when I2C clock source is SYSCLK */
+/* I2C TIMING is calculated from APB1 source clock = 50 MHz */
+/* Due to the big MOFSET capacity for adapting the camera level the rising time is very large (>1us) */
+/* 0x40912732 takes in account the big rising and aims a clock of 100khz */
+#ifndef DISCOVERY_I2Cx_TIMING  
+#define DISCOVERY_I2Cx_TIMING                      ((uint32_t)0x40912732)  
+#endif /* DISCOVERY_I2Cx_TIMING */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Macros STM32746G_DISCOVERY_LOW_LEVEL Exported Macros
+  * @{
+  */  
+/**
+  * @}
+  */ 
+
+/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Functions
+  * @{
+  */
+uint32_t  BSP_GetVersion(void);
+void      BSP_LED_Init(Led_TypeDef Led);
+void      BSP_LED_DeInit(Led_TypeDef Led);
+void      BSP_LED_On(Led_TypeDef Led);
+void      BSP_LED_Off(Led_TypeDef Led);
+void      BSP_LED_Toggle(Led_TypeDef Led);
+void      BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
+void      BSP_PB_DeInit(Button_TypeDef Button);
+uint32_t  BSP_PB_GetState(Button_TypeDef Button);
+void      BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef *husart);
+void      BSP_COM_DeInit(COM_TypeDef COM, UART_HandleTypeDef *huart);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32746G_DISCOVERY_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/