File content as of revision 26:1e1776201716:

#include "DummySensor.h"
using namespace events;

// Max payload size can be LORAMAC_PHY_MAXPAYLOAD.
// This example only communicates with much shorter messages (<30 bytes).
// If longer messages are used, these buffers must be changed accordingly.
uint8_t tx_buffer[30];
uint8_t rx_buffer[30];
int lora_cont=0;

/*
 * Sets up an application dependent transmission timer in ms. Used only when Duty Cycling is off for testing
 */
#define TX_TIMER                        10000

/**
 * Maximum number of events for the event queue.
 * 10 is the safe number for the stack events, however, if application
 * also uses the queue for whatever purposes, this number should be increased.
 */
 #define MAX_NUMBER_OF_EVENTS            10

/**
 * Maximum number of retries for CONFIRMED messages before giving up
 */
#define CONFIRMED_MSG_RETRY_COUNTER     3

/**
 * Dummy pin for dummy sensor
 */
#define PC_9                            0

/**
 * Dummy sensor class object
 */
DS1820  ds1820(PC_9);


/**
 * Sensors Variables
 */

/**
* This event queue is the global event queue for both the
* application and stack. To conserve memory, the stack is designed to run
* in the same thread as the application and the application is responsible for
* providing an event queue to the stack that will be used for ISR deferment as
* well as application information event queuing.
*/
static EventQueue ev_queue(MAX_NUMBER_OF_EVENTS *EVENTS_EVENT_SIZE);

/**
 * Event handler.
 *
 * This will be passed to the LoRaWAN stack to queue events for the
 * application which in turn drive the application.
 */
static void lora_event_handler(lorawan_event_t event);

/**
 * Constructing Mbed LoRaWANInterface and passing it the radio object from lora_radio_helper.
 */
static LoRaWANInterface lorawan(radio);

/**
 * Application specific callbacks
 */
static lorawan_app_callbacks_t callbacks;

/**
 * Entry point for application
 */
 



/**
 * Sends a message to the Network Server
 */
static void send_message()
{
    uint16_t packet_len;
    int16_t retcode;
    int32_t sensor_value;

    if (lora_cont<1024){ 
        packet_len = sprintf((char *) tx_buffer, "\r\n Buffering \r\n");
        retcode = lorawan.send(MBED_CONF_LORA_APP_PORT, tx_buffer, packet_len,
                           MSG_UNCONFIRMED_FLAG);
                           
        lora_cont=lora_cont+retcode;
        }
    else{
        
        Sensor_Read(1);
        GPS_Read();
        printf("\r\n Temp Sensor Value = %f Lat = %d Long  = %d \r\n", sensor_get_0, latitude, longitude);
        packet_len = sprintf((char *) tx_buffer, "\r\n %f, %d, %d \r\n",
                         sensor_get_0, latitude, longitude);
        retcode = lorawan.send(MBED_CONF_LORA_APP_PORT, tx_buffer, packet_len,
                           MSG_UNCONFIRMED_FLAG);
        }

    if (retcode < 0) {
        retcode == LORAWAN_STATUS_WOULD_BLOCK ? printf("send - WOULD BLOCK\r\n")
        : printf("\r\n send() - Error code %d \r\n", retcode);

        if (retcode == LORAWAN_STATUS_WOULD_BLOCK) {
            //retry in 3 seconds
            if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
                ev_queue.call_in(3000, send_message);
            }
        }
        return;
    }

    printf("\r\n %d bytes scheduled for transmission \r\n", retcode);
    memset(tx_buffer, 0, sizeof(tx_buffer));
}

/**
 * Receive a message from the Network Server
 */
static void receive_message()
{
    uint8_t port;
    int flags;
    int16_t retcode = lorawan.receive(rx_buffer, sizeof(rx_buffer), port, flags);

    if (retcode < 0) {
        printf("\r\n receive() - Error code %d \r\n", retcode);
        return;
    }

    printf(" RX Data on port %u (%d bytes): ", port, retcode);
    for (uint8_t i = 0; i < retcode; i++) {
        printf("%02x ", rx_buffer[i]);
    }
    printf("\r\n");
    
    memset(rx_buffer, 0, sizeof(rx_buffer));
}

/**
 * Event handler
 */
static void lora_event_handler(lorawan_event_t event)
{
    switch (event) {
        case CONNECTED:
            printf("\r\n Connection - Successful \r\n");
            if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
                send_message();
            } else {
                ev_queue.call_every(TX_TIMER, send_message);
            }

            break;
        case DISCONNECTED:
            ev_queue.break_dispatch();
            printf("\r\n Disconnected Successfully \r\n");
            break;
        case TX_DONE:
            printf("\r\n Message Sent to Network Server \r\n");
            if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
                send_message();
            }
            break;
        case TX_TIMEOUT:
        printf("\r\n Transmission Error TX_Timeout");
        case TX_ERROR:
        printf("\r\n Transmission Error TX_Error");
        case TX_CRYPTO_ERROR:
        printf("\r\n Transmission Error TX_Crypto_Error");
        case TX_SCHEDULING_ERROR:
            printf("\r\n Transmission Error - EventCode = %d \r\n", event);
            // try again
            if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
                send_message();
            }
            break;
        case RX_DONE:
            printf("\r\n Received message from Network Server \r\n");
            receive_message();
            break;
        case RX_TIMEOUT:
        printf("\r\n Transmission Error RX_Timeout");
        case RX_ERROR:
            printf("\r\n Error in reception - Code = %d \r\n", event);
            break;
        case JOIN_FAILURE:
            printf("\r\n OTAA Failed - Check Keys \r\n");
            break;
        case UPLINK_REQUIRED:
            printf("\r\n Uplink required by NS \r\n");
            if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
                send_message();
            }
            break;
        default:
            MBED_ASSERT("Unknown Event");
    }
}

// EOF