Diff: MSS.h

Revision:

2:ef315a40af7b

Parent:

0:27799234e2ed

diff -r 4870f310b921 -r ef315a40af7b MSS.h
--- a/MSS.h	Thu May 18 06:32:59 2017 +0000
+++ b/MSS.h	Wed Nov 22 09:27:32 2017 +0000
@@ -1,235 +1,10 @@
 #ifndef _MSS_H_
 #define _MSS_H_
 
-#if defined (TARGET_KL25Z)
-/* I2C */
-#define PIN_SCL  PTE1
-#define PIN_SDA  PTE0
-/* SPI */
-#define PIN_SCK  PTD1
-#define PIN_MISO PTD3
-#define PIN_MOSI PTD2
-#define PIN_CS0  PTD0
-/* Interrupt */
-#define PIN_INT0 PTD5
-#define PIN_INT1 PTA13
-#define PIN_INT2 PTC9  /* This pin does not support interrupt */
-#define PIN_INT3 PTC8  /* This pin does not support interrupt */
-#define PIN_INT4 PTA5
-#define PIN_INT5 PTA4
-/* Analog Input */
-#define PIN_AN0  PTB0
-#define PIN_AN1  PTB1
-#define PIN_AN2  PTB2
-#define PIN_AN3  PTB3
-#define PIN_AN4  PTC2
-#define PIN_AN5  PTC1
-#define BOARD_NAME "FRDM-KL25Z"
 
-#elif defined (TARGET_KL46Z)
-/* I2C */
-#define PIN_SCL  PTE1
-#define PIN_SDA  PTE0
-/* SPI */
-#define PIN_SCK  PTD5
-#define PIN_MISO PTD7
-#define PIN_MOSI PTD6
-#define PIN_CS0  PTD4
-/* Interrupt */
-#define PIN_INT0 PTD2
-#define PIN_INT1 PTA13
-#define PIN_INT2 PTC9  /* This pin does not support interrupt */
-#define PIN_INT3 PTC8  /* This pin does not support interrupt */
-#define PIN_INT4 PTA5
-#define PIN_INT5 PTA4
-/* Analog Input */
-#define PIN_AN0  PTB0
-#define PIN_AN1  PTB1
-#define PIN_AN2  PTB2
-#define PIN_AN3  PTB3
-#define PIN_AN4  PTC2
-#define PIN_AN5  PTC1
-#define BOARD_NAME "FRDM-KL46Z"
-
-#elif defined (TARGET_K64F)
-/* I2C */
-#define PIN_SCL  PTE24
-#define PIN_SDA  PTE25
-/* SPI */
-#define PIN_SCK  PTD1
-#define PIN_MISO PTD3
-#define PIN_MOSI PTD2
-#define PIN_CS0  PTD0
-/* Interrupt */
-#define PIN_INT0 PTC4
-#define PIN_INT1 PTA0
-#define PIN_INT2 PTC3
-#define PIN_INT3 PTC2
-#define PIN_INT4 PTA2
-#define PIN_INT5 PTB23
-/* Analog Input */
-#define PIN_AN0  PTB2
-#define PIN_AN1  PTB3
-#define PIN_AN2  PTB10
-#define PIN_AN3  PTB11
-#define PIN_AN4  PTC11
-#define PIN_AN5  PTC10
-#define BOARD_NAME "FRDM-K64Z"
-
-/**
- * NOTE: On FRDM-K22F
- * Both I2C and UART are assigned to 
- * the same pins PTE1/PTE0.
- * So MSS does not work as is.
- */
-#elif defined (TARGET_K22F) 
 /* I2C */
-/* for quattro-II/f-shaft-II */
-#if 1
-#define PIN_SCL  PTB2
-#define PIN_SDA  PTB3
-#endif
-#if 0
-#define PIN_SCL  PTC10
-#define PIN_SDA  PTC11
-#endif 
-/* SPI */
-#define PIN_SCK  PTD5
-#define PIN_MISO PTD7
-#define PIN_MOSI PTD6
-#define PIN_CS0  PTD4
-/* Interrupt */
-//#define PIN_INT0 PTA1
-//#define PIN_INT1 PTB19
-//#define PIN_INT2 PTC6
-//#define PIN_INT3 PTC3
-//#define PIN_INT4 PTB18
-//#define PIN_INT5 PTA4
-#define PIN_INT0 PTB16
-#define PIN_INT1 PTB17
-#define PIN_INT2 PTB18
-#define PIN_INT3 PTB19
-/* Analog Input */
-#define PIN_AN0  PTB0
-#define PIN_AN1  PTB1
-#define PIN_AN2  PTC1
-#define PIN_AN3  PTC2
-// #define PIN_AN4  PTB3
-// #define PIN_AN5  PTB2
-// #define BOARD_NAME "FRDM-K22F"
-#define BOARD_NAME "f-shaft-II"
-
-#elif defined (TARGET_KL05Z)
-/* I2C */
-#define PIN_SCL  PTB3
-#define PIN_SDA  PTB4
-/* SPI */
-#define PIN_SCK  PTB0
-#define PIN_MISO PTA6
-#define PIN_MOSI PTA7
-#define PIN_CS0  PTA5
-/* Interrupt */
-#define PIN_INT0 PTB11
-#define PIN_INT1 PTB10
-#define PIN_INT2 PTB7
-#define PIN_INT3 PTB6
-#define PIN_INT4 PTA12
-#define PIN_INT5 PTA10
-/* Analog Input */
-#define PIN_AN0  PTB8
-#define PIN_AN1  PTB9
-#define PIN_AN2  PTA8
-#define PIN_AN3  PTA0
-#define PIN_AN4  PTA9
-#define PIN_AN5  PTB13
-#define BOARD_NAME "FRDM-KL05Z"
-
-#elif defined (TARGET_F411RE)
-/* I2C */
-#define PIN_SCL  PB_8
-#define PIN_SDA  PB_9
-/* SPI */
-#define PIN_SCK  PA_5
-#define PIN_MISO PA_6
-#define PIN_MOSI PA_7
-#define PIN_CS0  PB_6
-/* Interrupt */
-#define PIN_INT0 PC_7
-#define PIN_INT1 PA_9
-#define PIN_INT2 PA_8
-#define PIN_INT3 PB_10
-#define PIN_INT4 PB_4
-#define PIN_INT5 PB_5
-/* Analog In */
-#define PIN_AN0  PA_0
-#define PIN_AN1  PA_1
-#define PIN_AN2  PA_4
-#define PIN_AN3  PB_0
-#define PIN_AN4  PC_1
-#define PIN_AN5  PC_0
-#define BOARD_NAME "NUCLEO-F411RE"
-
-#elif defined (TARGET_MAX32600MBED)
-/* I2C */
-#define PIN_SCL  P2_7
-#define PIN_SDA  P2_6
-/* SPI */
-#define PIN_SCK  P2_0
-#define PIN_MISO P2_2
-#define PIN_MOSI P2_1
-#define PIN_CS0  P2_3
-/* Interrupt */
-#define PIN_INT0 P2_4
-#define PIN_INT1 P2_5
-#define PIN_INT2 P1_7
-#define PIN_INT3 P1_6
-#define PIN_INT4 P1_5
-#define PIN_INT5 P1_4
-/* Analog In */
-#define PIN_AN0  AIN_0P
-#define PIN_AN1  AIN_1P
-#define PIN_AN2  AIN_2P
-#define PIN_AN3  AIN_3P
-#define PIN_AN4  AIN_4P
-#define PIN_AN5  AIN_5P
-#define BOARD_NAME "MAX32600MBED"
-
-#else
- #error TARGET NOT DEFINED
-/* I2C */
-#define PIN_SCL  D15
-#define PIN_SDA  D14
-/* SPI */
-#define PIN_SCK  D13
-#define PIN_MISO D12
-#define PIN_MOSI D11
-#define PIN_CS0  D10
-/* Interrupt */
-#define PIN_INT0 D9
-#define PIN_INT1 D8
-#define PIN_INT2 D7
-#define PIN_INT3 D6
-#define PIN_INT4 D5
-#define PIN_INT5 D4
-/* Analog In */
-#define PIN_AN0  A0
-#define PIN_AN1  A1
-#define PIN_AN2  A2
-#define PIN_AN3  A3
-#define PIN_AN4  A4
-#define PIN_AN5  A5
-/* MSS on board LEDs */
-#define LED_D1   D13
-#define LED_D2   D12
-#define LED_D3   D11
-#define LED_D4   D10
-#define LED_D5   D3
-#define LED_D6   D2
-#define LED_D7   D1
-#define LED_D8   D0
+#define PIN_SCL  p27
+#define PIN_SDA  p28
 
 
-
-#endif
-
 #endif /* _MSS_H_ */
\ No newline at end of file