History

Added following:; 1. ACA modules that control VBUS and ID pins; 2. Turned off laser after powerup default tip

2018-03-06, by bmentink [Tue, 06 Mar 2018 21:34:31 +0000] rev 21

Added following:; 1. ACA modules that control VBUS and ID pins; 2. Turned off laser after powerup

commit before publish

2018-03-05, by Farshad [Mon, 05 Mar 2018 22:14:16 +0000] rev 20

commit before publish

Added bonding.

2018-01-25, by Farshad [Thu, 25 Jan 2018 22:19:47 +0000] rev 19

Added bonding.

Version 1.5- Some modifications to save power. After each measurement go to redDot only to reduce current consumption from about 250mA to 50mA. Also the connectionLed now blinks every 2 seconds for 20ms to reduce the 4-5mA proportionally.

2017-07-18, by Farshad [Tue, 18 Jul 2017 05:17:37 +0000] rev 18

Version 1.5- Some modifications to save power. After each measurement go to redDot only to reduce current consumption from about 250mA to 50mA. Also the connectionLed now blinks every 2 seconds for 20ms to reduce the 4-5mA proportionally.

Added notification for when Laser power goes off due to inactivity. Also added command for setting the inactivity timeout.

2017-06-16, by Farshad [Fri, 16 Jun 2017 05:09:17 +0000] rev 17

Added notification for when Laser power goes off due to inactivity. Also added command for setting the inactivity timeout.

Serial Interrupt version- Similar problem of occasionally reporting distance with 1 or more decimal points wrong as version 15 in repository.- Revision 15 is polling and been tested more thoroughly and is the preferred version.

2017-03-01, by Farshad [Wed, 01 Mar 2017 23:50:26 +0000] rev 16

Serial Interrupt version- Similar problem of occasionally reporting distance with 1 or more decimal points wrong as version 15 in repository.- Revision 15 is polling and been tested more thoroughly and is the preferred version.

Firmware version 1.3. Added option for number of samples needed to do a measurement.

2017-02-27, by Farshad [Mon, 27 Feb 2017 01:35:10 +0000] rev 15

Firmware version 1.3. Added option for number of samples needed to do a measurement.

Added tag Version1.1 for changeset a051da83a849

2016-10-20, by root@developer-sjc-cyan-compiler.local.mbed.org [Thu, 20 Oct 2016 04:01:29 +0000] rev 14

Added tag Version1.1 for changeset a051da83a849

Check voltage every minute. Also drive tx and rx to GND when turning laser module power off. Version1.1

2016-10-20, by Farshad [Thu, 20 Oct 2016 04:00:31 +0000] rev 13

Check voltage every minute. Also drive tx and rx to GND when turning laser module power off.

Added low battery check and power save after i minute of inactivity. Also added function to reset the laser module.

2016-10-17, by Farshad [Mon, 17 Oct 2016 04:50:33 +0000] rev 12

Added low battery check and power save after i minute of inactivity. Also added function to reset the laser module.