Ned Konz / Mbed 2 deprecated Multi_WS2811_test

Test program for my Multi_WS2811 library that started out as a fork of heroic/WS2811. My library uses hardware DMA on the FRDM-KL25Z to drive up to 16 strings of WS2811 or WS2812 LEDs in parallel.

Dependencies:   Multi_WS2811 mbed MMA8451Q

Fork of WS2811 by Heroic Robotics

NOTE: I have accidentally pushed changes for another fork of this program that I used in the recent Georgetown Carnival Power Tool Races. When I get some time, I will restore the test program to its original glory.

You can see my power tool racer (Nevermore's Revenge) here

/media/uploads/bikeNomad/img_0482.jpg

This tests my FRDM-KL25Z multi-string WS2811/WS2812 library. It uses the accelerometer to change the rainbow phase on two strings of LEDs as well as the touch sense to change brightness.

A video of this program in operation is here.

Here is the library that I developed to run the LEDs:

Import libraryMulti_WS2811

Library allowing up to 16 strings of 60 WS2811 or WS2812 LEDs to be driven from a single FRDM-KL25Z board. Uses hardware DMA to do a full 800 KHz rate without much CPU burden.

Last commit 13 Jun 2015 by Ned Konz

Diff: WS2801.h

Revision:
8:e3249c2b7607
Parent:
7:3025f0e0d70a
Child:
9:dd524af149e6
--- a/WS2801.h	Fri Oct 12 04:16:40 2012 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,46 +0,0 @@
-// Mbed library to control WS2801-based RGB LED Strips
-// some portions (c) 2011 Jelmer Tiete
-// This library is ported from the Arduino implementation of Adafruit Industries
-// found at: http://github.com/adafruit/LPD8806
-// and their strips: http://www.adafruit.com/products/306
-// Released under the MIT License: http://mbed.org/license/mit
-//
-/*****************************************************************************/
-
-// Heavily modified by Jas Strong, 2012-10-04
-// Changed to use a virtual base class and to use software SPI.
-
-#include "mbed.h"
-#include "LedStrip.h"
-#ifndef MBED_WS2801_H
-#define MBED_WS2801_H
-
-#define WS2801_DELAY 1
-
-class WS2801 : public LedStrip {
-
- public:
-
-  WS2801(PinName dataPin, PinName clockPin, int n);
-  virtual void begin(void);
-  virtual void show(void);
-  virtual void blank(void);
-  virtual void setPixelColor(uint16_t n, uint8_t r, uint8_t g, uint8_t b);
-  virtual void setPixelB(uint16_t n, uint8_t b);
-  virtual void setPixelG(uint16_t n, uint8_t g);
-  virtual void setPixelR(uint16_t n, uint8_t r);
-  virtual void setPixelColor(uint16_t n, uint32_t c);
-  virtual uint16_t numPixels(void);
-  virtual uint32_t Color(uint8_t, uint8_t, uint8_t);
-  virtual uint32_t total_luminance(void);
-
- private:
-  DigitalOut dat;
-  DigitalOut clk;
-  void write(uint8_t byte);
-  uint8_t *pixels;     // Holds LED color values
-  uint16_t numLEDs;     // Number of RGB LEDs in strand
-  Timer guardtime;
-    
-};
-#endif
\ No newline at end of file