Test program for my Multi_WS2811 library that started out as a fork of heroic/WS2811. My library uses hardware DMA on the FRDM-KL25Z to drive up to 16 strings of WS2811 or WS2812 LEDs in parallel.
Dependencies: Multi_WS2811 mbed MMA8451Q
Fork of WS2811 by
NOTE: I have accidentally pushed changes for another fork of this program that I used in the recent Georgetown Carnival Power Tool Races. When I get some time, I will restore the test program to its original glory.
You can see my power tool racer (Nevermore's Revenge) here
This tests my FRDM-KL25Z multi-string WS2811/WS2812 library. It uses the accelerometer to change the rainbow phase on two strings of LEDs as well as the touch sense to change brightness.
A video of this program in operation is here.
Here is the library that I developed to run the LEDs:
Import libraryMulti_WS2811
Library allowing up to 16 strings of 60 WS2811 or WS2812 LEDs to be driven from a single FRDM-KL25Z board. Uses hardware DMA to do a full 800 KHz rate without much CPU burden.
Diff: mbed.bld
- Revision:
- 32:115032de785f
- Parent:
- 20:b9d76e567637
- Child:
- 40:d5c8ce80b6c4
diff -r c9eee3a33826 -r 115032de785f mbed.bld --- a/mbed.bld Sat Jan 04 00:45:20 2014 +0000 +++ b/mbed.bld Thu Jun 11 15:24:57 2015 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/users/mbed_official/code/mbed/builds/dc225afb6914 \ No newline at end of file +http://mbed.org/users/mbed_official/code/mbed/builds/7cff1c4259d7 \ No newline at end of file