Ben Katz
mbed library sources. Supersedes mbed-src.
Dependents: Hobbyking_Cheetah_Compact Hobbyking_Cheetah_Compact_DRV8323_14bit Hobbyking_Cheetah_Compact_DRV8323_V51_201907 HKC_MiniCheetah ... more
Fork of
mbed-dev
by 
mbed official
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC11U6X/LPC11U6x.h
- Revision:
- 0:9b334a45a8ff
- Child:
- 144:ef7eb2e8f9f7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11U6X/LPC11U6x.h Thu Oct 01 15:25:22 2015 +0300
@@ -0,0 +1,1247 @@
+
+/****************************************************************************************************//**
+ * @file LPC11U6x.h
+ *
+ * @brief CMSIS Cortex-M0PLUS Peripheral Access Layer Header File for
+ * LPC11U6x from .
+ *
+ * @version V0.4
+ * @date 22. October 2013
+ *
+ * @note Generated with SVDConv V2.81a
+ * from CMSIS SVD File 'LPC11U6x.svd' Version 0.4,
+ *
+ * modified by Keil
+ *******************************************************************************************************/
+
+
+
+/** @addtogroup (null)
+ * @{
+ */
+
+/** @addtogroup LPC11U6x
+ * @{
+ */
+
+#ifndef LPC11U6X_H
+#define LPC11U6X_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* ------------------------- Interrupt Number Definition ------------------------ */
+
+typedef enum {
+/* ----------------- Cortex-M0PLUS Processor Exceptions Numbers ----------------- */
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+
+
+
+ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
+
+
+ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
+ SysTick_IRQn = -1, /*!< 15 System Tick Timer */
+/* --------------------- LPC11U6x Specific Interrupt Numbers -------------------- */
+ PIN_INT0_IRQn = 0, /*!< 0 PIN_INT0 */
+ PIN_INT1_IRQn = 1, /*!< 1 PIN_INT1 */
+ PIN_INT2_IRQn = 2, /*!< 2 PIN_INT2 */
+ PIN_INT3_IRQn = 3, /*!< 3 PIN_INT3 */
+ PIN_INT4_IRQn = 4, /*!< 4 PIN_INT4 */
+ PIN_INT5_IRQn = 5, /*!< 5 PIN_INT5 */
+ PIN_INT6_IRQn = 6, /*!< 6 PIN_INT6 */
+ PIN_INT7_IRQn = 7, /*!< 7 PIN_INT7 */
+ GINT0_IRQn = 8, /*!< 8 GINT0 */
+ GINT1_IRQn = 9, /*!< 9 GINT1 */
+ I2C1_IRQn = 10, /*!< 10 I2C1 */
+ USART1_4_IRQn = 11, /*!< 11 USART1_4 */
+ USART2_3_IRQn = 12, /*!< 12 USART2_3 */
+ SCT0_1_IRQn = 13, /*!< 13 SCT0_1 */
+ SSP1_IRQn = 14, /*!< 14 SSP1 */
+ I2C0_IRQn = 15, /*!< 15 I2C0 */
+ CT16B0_IRQn = 16, /*!< 16 CT16B0 */
+ CT16B1_IRQn = 17, /*!< 17 CT16B1 */
+ CT32B0_IRQn = 18, /*!< 18 CT32B0 */
+ CT32B1_IRQn = 19, /*!< 19 CT32B1 */
+ SSP0_IRQn = 20, /*!< 20 SSP0 */
+ USART0_IRQn = 21, /*!< 21 USART0 */
+ USB_IRQn = 22, /*!< 22 USB */
+ USB_FIQ_IRQn = 23, /*!< 23 USB_FIQ */
+ ADC_A_IRQn = 24, /*!< 24 ADC_A */
+ RTC_IRQn = 25, /*!< 25 RTC */
+ BOD_WDT_IRQn = 26, /*!< 26 BOD_WDT */
+ FLASH_IRQn = 27, /*!< 27 FLASH */
+ DMA_IRQn = 28, /*!< 28 DMA */
+ ADC_B_IRQn = 29, /*!< 29 ADC_B */
+ USBWAKEUP_IRQn = 30 /*!< 30 USBWAKEUP */
+} IRQn_Type;
+
+
+/** @addtogroup Configuration_of_CMSIS
+ * @{
+ */
+
+
+/* ================================================================================ */
+/* ================ Processor and Core Peripheral Section ================ */
+/* ================================================================================ */
+
+/* ----------------Configuration of the Cortex-M0PLUS Processor and Core Peripherals---------------- */
+#define __CM0PLUS_REV 0x0000 /*!< Cortex-M0PLUS Core Revision */
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __VTOR_PRESENT 1 /*!< Set to 1 if CPU supports Vector Table Offset Register */
+/** @} */ /* End of group Configuration_of_CMSIS */
+
+#include "core_cm0plus.h" /*!< Cortex-M0PLUS processor and core peripherals */
+#include "system_LPC11U6x.h" /*!< LPC11U6x System */
+
+
+/* ================================================================================ */
+/* ================ Device Specific Peripheral Section ================ */
+/* ================================================================================ */
+
+
+/** @addtogroup Device_Peripheral_Registers
+ * @{
+ */
+
+
+/* ------------------- Start of section using anonymous unions ------------------ */
+#if defined(__CC_ARM)
+ #pragma push
+ #pragma anon_unions
+#elif defined(__ICCARM__)
+ #pragma language=extended
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+/* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning 586
+#else
+ #warning Not supported compiler type
+#endif
+
+
+
+/* ================================================================================ */
+/* ================ I2C0 ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief I2C-bus controller (I2C0)
+ */
+
+typedef struct { /*!< I2C0 Structure */
+ __IO uint32_t CONSET; /*!< I2C Control Set Register. When a one is written to a bit of
+ this register, the corresponding bit in the I2C control register
+ is set. Writing a zero has no effect on the corresponding bit
+ in the I2C control register. */
+ __I uint32_t STAT; /*!< I2C Status Register. During I2C operation, this register provides
+ detailed status codes that allow software to determine the next
+ action needed. */
+ __IO uint32_t DAT; /*!< I2C Data Register. During master or slave transmit mode, data
+ to be transmitted is written to this register. During master
+ or slave receive mode, data that has been received may be read
+ from this register. */
+ __IO uint32_t ADR0; /*!< I2C Slave Address Register 0. Contains the 7-bit slave address
+ for operation of the I2C interface in slave mode, and is not
+ used in master mode. The least significant bit determines whether
+ a slave responds to the General Call address. */
+ __IO uint32_t SCLH; /*!< SCH Duty Cycle Register High Half Word. Determines the high
+ time of the I2C clock. */
+ __IO uint32_t SCLL; /*!< SCL Duty Cycle Register Low Half Word. Determines the low time
+ of the I2C clock. I2nSCLL and I2nSCLH together determine the
+ clock frequency generated by an I2C master and certain times
+ used in slave mode. */
+ __O uint32_t CONCLR; /*!< I2C Control Clear Register. When a one is written to a bit of
+ this register, the corresponding bit in the I2C control register
+ is cleared. Writing a zero has no effect on the corresponding
+ bit in the I2C control register. */
+ __IO uint32_t MMCTRL; /*!< Monitor mode control register. */
+ __IO uint32_t ADR1; /*!< I2C Slave Address Register. Contains the 7-bit slave address
+ for operation of the I2C interface in slave mode, and is not
+ used in master mode. The least significant bit determines whether
+ a slave responds to the General Call address. */
+ __IO uint32_t ADR2; /*!< I2C Slave Address Register. Contains the 7-bit slave address
+ for operation of the I2C interface in slave mode, and is not
+ used in master mode. The least significant bit determines whether
+ a slave responds to the General Call address. */
+ __IO uint32_t ADR3; /*!< I2C Slave Address Register. Contains the 7-bit slave address
+ for operation of the I2C interface in slave mode, and is not
+ used in master mode. The least significant bit determines whether
+ a slave responds to the General Call address. */
+ __I uint32_t DATA_BUFFER; /*!< Data buffer register. The contents of the 8 MSBs of the I2DAT
+ shift register will be transferred to the DATA_BUFFER automatically
+ after every nine bits (8 bits of data plus ACK or NACK) has
+ been received on the bus. */
+ __IO uint32_t MASK0; /*!< I2C Slave address mask register. This mask register is associated
+ with I2ADR0 to determine an address match. The mask register
+ has no effect when comparing to the General Call address (0000000). */
+ __IO uint32_t MASK1; /*!< I2C Slave address mask register. This mask register is associated
+ with I2ADR0 to determine an address match. The mask register
+ has no effect when comparing to the General Call address (0000000). */
+ __IO uint32_t MASK2; /*!< I2C Slave address mask register. This mask register is associated
+ with I2ADR0 to determine an address match. The mask register
+ has no effect when comparing to the General Call address (0000000). */
+ __IO uint32_t MASK3; /*!< I2C Slave address mask register. This mask register is associated
+ with I2ADR0 to determine an address match. The mask register
+ has no effect when comparing to the General Call address (0000000). */
+} LPC_I2C0_Type;
+
+
+/* ================================================================================ */
+/* ================ WWDT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Windowed Watchdog Timer (WWDT) (WWDT)
+ */
+
+typedef struct { /*!< WWDT Structure */
+ __IO uint32_t MOD; /*!< Watchdog mode register. This register contains the basic mode
+ and status of the Watchdog Timer. */
+ __IO uint32_t TC; /*!< Watchdog timer constant register. This 24-bit register determines
+ the time-out value. */
+ __O uint32_t FEED; /*!< Watchdog feed sequence register. Writing 0xAA followed by 0x55
+ to this register reloads the Watchdog timer with the value contained
+ in WDTC. */
+ __I uint32_t TV; /*!< Watchdog timer value register. This 24-bit register reads out
+ the current value of the Watchdog timer. */
+ __IO uint32_t CLKSEL; /*!< Watchdog clock select register. */
+ __IO uint32_t WARNINT; /*!< Watchdog Warning Interrupt compare value. */
+ __IO uint32_t WINDOW; /*!< Watchdog Window compare value. */
+} LPC_WWDT_Type;
+
+
+/* ================================================================================ */
+/* ================ USART0 ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief USART0 (USART0)
+ */
+
+typedef struct { /*!< USART0 Structure */
+
+ union {
+ __IO uint32_t DLL; /*!< Divisor Latch LSB. Least significant byte of the baud rate divisor
+ value. The full divisor is used to generate a baud rate from
+ the fractional rate divider. (DLAB=1) */
+ __O uint32_t THR; /*!< Transmit Holding Register. The next character to be transmitted
+ is written here. (DLAB=0) */
+ __I uint32_t RBR; /*!< Receiver Buffer Register. Contains the next received character
+ to be read. (DLAB=0) */
+ };
+
+ union {
+ __IO uint32_t IER; /*!< Interrupt Enable Register. Contains individual interrupt enable
+ bits for the 7 potential USART interrupts. (DLAB=0) */
+ __IO uint32_t DLM; /*!< Divisor Latch MSB. Most significant byte of the baud rate divisor
+ value. The full divisor is used to generate a baud rate from
+ the fractional rate divider. (DLAB=1) */
+ };
+
+ union {
+ __O uint32_t FCR; /*!< FIFO Control Register. Controls USART FIFO usage and modes. */
+ __I uint32_t IIR; /*!< Interrupt ID Register. Identifies which interrupt(s) are pending. */
+ };
+ __IO uint32_t LCR; /*!< Line Control Register. Contains controls for frame formatting
+ and break generation. */
+ __IO uint32_t MCR; /*!< Modem Control Register. */
+ __I uint32_t LSR; /*!< Line Status Register. Contains flags for transmit and receive
+ status, including line errors. */
+ __I uint32_t MSR; /*!< Modem Status Register. */
+ __IO uint32_t SCR; /*!< Scratch Pad Register. Eight-bit temporary storage for software. */
+ __IO uint32_t ACR; /*!< Auto-baud Control Register. Contains controls for the auto-baud
+ feature. */
+ __IO uint32_t ICR; /*!< IrDA Control Register. Enables and configures the IrDA (remote
+ control) mode. */
+ __IO uint32_t FDR; /*!< Fractional Divider Register. Generates a clock input for the
+ baud rate divider. */
+ __IO uint32_t OSR; /*!< Oversampling Register. Controls the degree of oversampling during
+ each bit time. */
+ __IO uint32_t TER; /*!< Transmit Enable Register. Turns off USART transmitter for use
+ with software flow control. */
+ __I uint32_t RESERVED0[3];
+ __IO uint32_t HDEN; /*!< Half duplex enable register. */
+ __I uint32_t RESERVED1;
+ __IO uint32_t SCICTRL; /*!< Smart Card Interface Control register. Enables and configures
+ the Smart Card Interface feature. */
+ __IO uint32_t RS485CTRL; /*!< RS-485/EIA-485 Control. Contains controls to configure various
+ aspects of RS-485/EIA-485 modes. */
+ __IO uint32_t RS485ADRMATCH; /*!< RS-485/EIA-485 address match. Contains the address match value
+ for RS-485/EIA-485 mode. */
+ __IO uint32_t RS485DLY; /*!< RS-485/EIA-485 direction control delay. */
+ __IO uint32_t SYNCCTRL; /*!< Synchronous mode control register. */
+} LPC_USART0_Type;
+
+
+/* ================================================================================ */
+/* ================ CT16B0 ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief 16-bit counter/timers CT16B0 (CT16B0)
+ */
+
+typedef struct { /*!< CT16B0 Structure */
+ __IO uint32_t IR; /*!< Interrupt Register. The IR can be written to clear interrupts.
+ The IR can be read to identify which of eight possible interrupt
+ sources are pending. */
+ __IO uint32_t TCR; /*!< Timer Control Register. The TCR is used to control the Timer
+ Counter functions. The Timer Counter can be disabled or reset
+ through the TCR. */
+ __IO uint32_t TC; /*!< Timer Counter. The 16-bit TC is incremented every PR+1 cycles
+ of PCLK. The TC is controlled through the TCR. */
+ __IO uint32_t PR; /*!< Prescale Register. When the Prescale Counter (below) is equal
+ to this value, the next clock increments the TC and clears the
+ PC. */
+ __IO uint32_t PC; /*!< Prescale Counter. The 16-bit PC is a counter which is incremented
+ to the value stored in PR. When the value in PR is reached,
+ the TC is incremented and the PC is cleared. The PC is observable
+ and controllable through the bus interface. */
+ __IO uint32_t MCR; /*!< Match Control Register. The MCR is used to control if an interrupt
+ is generated and if the TC is reset when a Match occurs. */
+ __IO uint32_t MR0; /*!< Match Register. MR can be enabled through the MCR to reset the
+ TC, stop both the TC and PC, and/or generate an interrupt every
+ time MR0 matches the TC. */
+ __IO uint32_t MR1; /*!< Match Register. MR can be enabled through the MCR to reset the
+ TC, stop both the TC and PC, and/or generate an interrupt every
+ time MR0 matches the TC. */
+ __IO uint32_t MR2; /*!< Match Register. MR can be enabled through the MCR to reset the
+ TC, stop both the TC and PC, and/or generate an interrupt every
+ time MR0 matches the TC. */
+ __IO uint32_t MR3; /*!< Match Register. MR can be enabled through the MCR to reset the
+ TC, stop both the TC and PC, and/or generate an interrupt every
+ time MR0 matches the TC. */
+ __IO uint32_t CCR; /*!< Capture Control Register. The CCR controls which edges of the
+ capture inputs are used to load the Capture Registers and whether
+ or not an interrupt is generated when a capture takes place. */
+ __I uint32_t CR0; /*!< Capture Register. CR is loaded with the value of TC when there
+ is an event on the CAP input. */
+ __I uint32_t CR1; /*!< Capture Register. CR is loaded with the value of TC when there
+ is an event on the CAP input. */
+ __I uint32_t CR2; /*!< Capture Register. CR is loaded with the value of TC when there
+ is an event on the CAP input. */
+ __I uint32_t RESERVED0;
+ __IO uint32_t EMR; /*!< External Match Register. The EMR controls the match function
+ and the external match pins CT16B0_MAT[1:0] and CT16B1_MAT[1:0]. */
+ __I uint32_t RESERVED1[12];
+ __IO uint32_t CTCR; /*!< Count Control Register. The CTCR selects between Timer and Counter
+ mode, and in Counter mode selects the signal and edge(s) for
+ counting. */
+ __IO uint32_t PWMC; /*!< PWM Control Register. The PWMCON enables PWM mode for the external
+ match pins CT16B0_MAT[1:0] and CT16B1_MAT[1:0]. */
+} LPC_CT16B0_Type;
+
+
+/* ================================================================================ */
+/* ================ CT32B0 ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief 32-bit counter/timers CT32B0 (CT32B0)
+ */
+
+typedef struct { /*!< CT32B0 Structure */
+ __IO uint32_t IR; /*!< Interrupt Register. The IR can be written to clear interrupts.
+ The IR can be read to identify which of eight possible interrupt
+ sources are pending. */
+ __IO uint32_t TCR; /*!< Timer Control Register. The TCR is used to control the Timer
+ Counter functions. The Timer Counter can be disabled or reset
+ through the TCR. */
+ __IO uint32_t TC; /*!< Timer Counter. The 32-bit TC is incremented every PR+1 cycles
+ of PCLK. The TC is controlled through the TCR. */
+ __IO uint32_t PR; /*!< Prescale Register. When the Prescale Counter (below) is equal
+ to this value, the next clock increments the TC and clears the
+ PC. */
+ __IO uint32_t PC; /*!< Prescale Counter. The 32-bit PC is a counter which is incremented
+ to the value stored in PR. When the value in PR is reached,
+ the TC is incremented and the PC is cleared. The PC is observable
+ and controllable through the bus interface. */
+ __IO uint32_t MCR; /*!< Match Control Register. The MCR is used to control if an interrupt
+ is generated and if the TC is reset when a Match occurs. */
+ __IO uint32_t MR0; /*!< Match Register. MR can be enabled through the MCR to reset the
+ TC, stop both the TC and PC, and/or generate an interrupt every
+ time MR0 matches the TC. */
+ __IO uint32_t MR1; /*!< Match Register. MR can be enabled through the MCR to reset the
+ TC, stop both the TC and PC, and/or generate an interrupt every
+ time MR0 matches the TC. */
+ __IO uint32_t MR2; /*!< Match Register. MR can be enabled through the MCR to reset the
+ TC, stop both the TC and PC, and/or generate an interrupt every
+ time MR0 matches the TC. */
+ __IO uint32_t MR3; /*!< Match Register. MR can be enabled through the MCR to reset the
+ TC, stop both the TC and PC, and/or generate an interrupt every
+ time MR0 matches the TC. */
+ __IO uint32_t CCR; /*!< Capture Control Register. The CCR controls which edges of the
+ capture inputs are used to load the Capture Registers and whether
+ or not an interrupt is generated when a capture takes place. */
+ __I uint32_t CR0; /*!< Capture Register. CR is loaded with the value of TC when there
+ is an event on the CAP input. */
+ __I uint32_t CR1; /*!< Capture Register. CR is loaded with the value of TC when there
+ is an event on the CAP input. */
+ __I uint32_t CR2; /*!< Capture Register. CR is loaded with the value of TC when there
+ is an event on the CAP input. */
+ __I uint32_t RESERVED0;
+ __IO uint32_t EMR; /*!< External Match Register. The EMR controls the match function
+ and the external match pins CT32Bn_MAT[3:0]. */
+ __I uint32_t RESERVED1[12];
+ __IO uint32_t CTCR; /*!< Count Control Register. The CTCR selects between Timer and Counter
+ mode, and in Counter mode selects the signal and edge(s) for
+ counting. */
+ __IO uint32_t PWMC; /*!< PWM Control Register. The PWMCON enables PWM mode for the external
+ match pins CT32Bn_MAT[3:0]. */
+} LPC_CT32B0_Type;
+
+
+/* ================================================================================ */
+/* ================ ADC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Product name title=Kylin UM Chapter title=Kylin12-bit Analog-to-Digital Converter (ADC) Modification date=5/13/2013 Major revision=0 Minor revision=1 (ADC)
+ */
+
+typedef struct { /*!< ADC Structure */
+ __IO uint32_t CTRL; /*!< A/D Control Register. Contains the clock divide value, enable
+ bits for each sequence and the A/D power-down bit. */
+ __I uint32_t RESERVED0;
+ __IO uint32_t SEQA_CTRL; /*!< A/D Conversion Sequence-A control Register: Controls triggering
+ and channel selection for conversion sequence-A. Also specifies
+ interrupt mode for sequence-A. */
+ __IO uint32_t SEQB_CTRL; /*!< A/D Conversion Sequence-B Control Register: Controls triggering
+ and channel selection for conversion sequence-B. Also specifies
+ interrupt mode for sequence-B. */
+ __IO uint32_t SEQA_GDAT; /*!< A/D Sequence-A Global Data Register. This register contains
+ the result of the most recent A/D conversion performed under
+ sequence-A */
+ __IO uint32_t SEQB_GDAT; /*!< A/D Sequence-B Global Data Register. This register contains
+ the result of the most recent A/D conversion performed under
+ sequence-B */
+ __I uint32_t RESERVED1[2];
+ __I uint32_t DAT[12]; /*!< A/D Channel 0 Data Register. This register contains the result
+ of the most recent conversion completed on channel 0. */
+ __IO uint32_t THR0_LOW; /*!< A/D Low Compare Threshold Register 0 : Contains the lower threshold
+ level for automatic threshold comparison for any channels linked
+ to threshold pair 0. */
+ __IO uint32_t THR1_LOW; /*!< A/D Low Compare Threshold Register 1: Contains the lower threshold
+ level for automatic threshold comparison for any channels linked
+ to threshold pair 1. */
+ __IO uint32_t THR0_HIGH; /*!< A/D High Compare Threshold Register 0: Contains the upper threshold
+ level for automatic threshold comparison for any channels linked
+ to threshold pair 0. */
+ __IO uint32_t THR1_HIGH; /*!< A/D High Compare Threshold Register 1: Contains the upper threshold
+ level for automatic threshold comparison for any channels linked
+ to threshold pair 1. */
+ __I uint32_t CHAN_THRSEL; /*!< A/D Channel-Threshold Select Register. Specifies which set of
+ threshold compare registers are to be used for each channel */
+ __IO uint32_t INTEN; /*!< A/D Interrupt Enable Register. This register contains enable
+ bits that enable the sequence-A, sequence-B, threshold compare
+ and data overrun interrupts to be generated. */
+ __I uint32_t FLAGS; /*!< A/D Flags Register. Contains the four interrupt request flags
+ and the individual component overrun and threshold-compare flags.
+ (The overrun bits replicate information stored in the result
+ registers). */
+ __IO uint32_t TRM; /*!< ADC trim register. */
+} LPC_ADC_Type;
+
+
+/* ================================================================================ */
+/* ================ RTC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Real-Time Clock (RTC) (RTC)
+ */
+
+typedef struct { /*!< RTC Structure */
+ __IO uint32_t CTRL; /*!< RTC control register */
+ __IO uint32_t MATCH; /*!< RTC match register */
+ __IO uint32_t COUNT; /*!< RTC counter register */
+ __IO uint32_t WAKE; /*!< RTC high-resolution/wake-up timer control register */
+} LPC_RTC_Type;
+
+
+/* ================================================================================ */
+/* ================ DMATRIGMUX ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Product name title=Kylin UM Chapter title=KylinDMA controller Modification date=5/13/2013 Major revision=0 Minor revision=1 (DMATRIGMUX)
+ */
+
+typedef struct { /*!< DMATRIGMUX Structure */
+ __IO uint32_t DMA_ITRIG_PINMUX[16]; /*!< Trigger input select register for DMA channel 0. */
+} LPC_DMATRIGMUX_Type;
+
+
+/* ================================================================================ */
+/* ================ PMU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Product name title=Kylin UM Chapter title=KylinPower Management Unit (PMU) Modification date=5/13/2013 Major revision=0 Minor revision=1 (PMU)
+ */
+
+typedef struct { /*!< PMU Structure */
+ __IO uint32_t PCON; /*!< Power control register */
+ __IO uint32_t GPREG0; /*!< General purpose register 0 */
+ __IO uint32_t GPREG1; /*!< General purpose register 0 */
+ __IO uint32_t GPREG2; /*!< General purpose register 0 */
+ __IO uint32_t GPREG3; /*!< General purpose register 0 */
+ __IO uint32_t DPDCTRL; /*!< Deep power down control register */
+} LPC_PMU_Type;
+
+
+/* ================================================================================ */
+/* ================ FLASHCTRL ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Flash controller (FLASHCTRL)
+ */
+
+typedef struct { /*!< FLASHCTRL Structure */
+ __I uint32_t RESERVED0[4];
+ __IO uint32_t FLASHCFG; /*!< Flash configuration register */
+ __I uint32_t RESERVED1[3];
+ __IO uint32_t FMSSTART; /*!< Signature start address register */
+ __IO uint32_t FMSSTOP; /*!< Signature stop-address register */
+ __I uint32_t RESERVED2;
+ __I uint32_t FMSW0; /*!< Signature Word */
+} LPC_FLASHCTRL_Type;
+
+
+/* ================================================================================ */
+/* ================ SSP0 ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SSP/SPI (SSP0)
+ */
+
+typedef struct { /*!< SSP0 Structure */
+ __IO uint32_t CR0; /*!< Control Register 0. Selects the serial clock rate, bus type,
+ and data size. */
+ __IO uint32_t CR1; /*!< Control Register 1. Selects master/slave and other modes. */
+ __IO uint32_t DR; /*!< Data Register. Writes fill the transmit FIFO, and reads empty
+ the receive FIFO. */
+ __I uint32_t SR; /*!< Status Register */
+ __IO uint32_t CPSR; /*!< Clock Prescale Register */
+ __IO uint32_t IMSC; /*!< Interrupt Mask Set and Clear Register */
+ __I uint32_t RIS; /*!< Raw Interrupt Status Register */
+ __I uint32_t MIS; /*!< Masked Interrupt Status Register */
+ __O uint32_t ICR; /*!< SSPICR Interrupt Clear Register */
+} LPC_SSP0_Type;
+
+
+/* ================================================================================ */
+/* ================ IOCON ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Product name title=Kylin UM Chapter title=KylinI/O control (IOCON) Modification date=5/13/2013 Major revision=0 Minor revision=1 (IOCON)
+ */
+
+typedef struct { /*!< IOCON Structure */
+ __IO uint32_t PIO0_0; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_1; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_2; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_3; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_4; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_5; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_6; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_7; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_8; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_9; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_10; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_11; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_12; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_13; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_14; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_15; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_16; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_17; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_18; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_19; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_20; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_21; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_22; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO0_23; /*!< I/O configuration for port PIO0 */
+ __IO uint32_t PIO1_0; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_1; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_2; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_3; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_4; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_5; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_6; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_7; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_8; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_9; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_10; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_11; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_12; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_13; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_14; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_15; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_16; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_17; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_18; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_19; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_20; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_21; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_22; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_23; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_24; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_25; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_26; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_27; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_28; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_29; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_30; /*!< I/O configuration for port PIO1 */
+ __IO uint32_t PIO1_31; /*!< I/O configuration for port PIO1 */
+ __I uint32_t RESERVED0[4];
+ __IO uint32_t PIO2_0; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_1; /*!< I/O configuration for port PIO2 */
+ __I uint32_t RESERVED1;
+ __IO uint32_t PIO2_2; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_3; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_4; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_5; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_6; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_7; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_8; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_9; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_10; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_11; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_12; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_13; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_14; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_15; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_16; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_17; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_18; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_19; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_20; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_21; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_22; /*!< I/O configuration for port PIO2 */
+ __IO uint32_t PIO2_23; /*!< I/O configuration for port PIO2 */
+} LPC_IOCON_Type;
+
+
+/* ================================================================================ */
+/* ================ SYSCON ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Product name title=Kylin UM Chapter title=KylinSystem configuration (SYSCON) Modification date=5/13/2013 Major revision=0 Minor revision=1 (SYSCON)
+ */
+
+typedef struct { /*!< SYSCON Structure */
+ __IO uint32_t SYSMEMREMAP; /*!< System memory remap */
+ __IO uint32_t PRESETCTRL; /*!< Peripheral reset control */
+ __IO uint32_t SYSPLLCTRL; /*!< System PLL control */
+ __I uint32_t SYSPLLSTAT; /*!< System PLL status */
+ __IO uint32_t USBPLLCTRL; /*!< USB PLL control */
+ __I uint32_t USBPLLSTAT; /*!< USB PLL status */
+ __I uint32_t RESERVED0;
+ __IO uint32_t RTCOSCCTRL; /*!< RTC oscillator 32 kHz output control */
+ __IO uint32_t SYSOSCCTRL; /*!< System oscillator control */
+ __IO uint32_t WDTOSCCTRL; /*!< Watchdog oscillator control */
+ __I uint32_t RESERVED1[2];
+ __IO uint32_t SYSRSTSTAT; /*!< System reset status register */
+ __I uint32_t RESERVED2[3];
+ __IO uint32_t SYSPLLCLKSEL; /*!< System PLL clock source select */
+ __IO uint32_t SYSPLLCLKUEN; /*!< System PLL clock source update enable */
+ __IO uint32_t USBPLLCLKSEL; /*!< USB PLL clock source select */
+ __IO uint32_t USBPLLCLKUEN; /*!< USB PLL clock source update enable */
+ __I uint32_t RESERVED3[8];
+ __IO uint32_t MAINCLKSEL; /*!< Main clock source select */
+ __IO uint32_t MAINCLKUEN; /*!< Main clock source update enable */
+ __IO uint32_t SYSAHBCLKDIV; /*!< System clock divider */
+ __I uint32_t RESERVED4;
+ __IO uint32_t SYSAHBCLKCTRL; /*!< System clock control */
+ __I uint32_t RESERVED5[4];
+ __IO uint32_t SSP0CLKDIV; /*!< SSP0 clock divider */
+ __IO uint32_t USART0CLKDIV; /*!< USART0 clock divider */
+ __IO uint32_t SSP1CLKDIV; /*!< SSP1 clock divider */
+ __IO uint32_t FRGCLKDIV; /*!< Clock divider for the common fractional baud rate generator
+ of USART1 to USART4 */
+ __I uint32_t RESERVED6[7];
+ __IO uint32_t USBCLKSEL; /*!< USB clock source select */
+ __IO uint32_t USBCLKUEN; /*!< USB clock source update enable */
+ __IO uint32_t USBCLKDIV; /*!< USB clock source divider */
+ __I uint32_t RESERVED7[5];
+ __IO uint32_t CLKOUTSEL; /*!< CLKOUT clock source select */
+ __IO uint32_t CLKOUTUEN; /*!< CLKOUT clock source update enable */
+ __IO uint32_t CLKOUTDIV; /*!< CLKOUT clock divider */
+ __I uint32_t RESERVED8;
+ __IO uint32_t UARTFRGDIV; /*!< USART fractional generator divider value */
+ __IO uint32_t UARTFRGMULT; /*!< USART fractional generator multiplier value */
+ __I uint32_t RESERVED9;
+ __IO uint32_t EXTTRACECMD; /*!< External trace buffer command register */
+ __I uint32_t PIOPORCAP0; /*!< POR captured PIO status 0 */
+ __I uint32_t PIOPORCAP1; /*!< POR captured PIO status 1 */
+ __I uint32_t PIOPORCAP2; /*!< POR captured PIO status 1 */
+ __I uint32_t RESERVED10[10];
+ __IO uint32_t IOCONCLKDIV6; /*!< Peripheral clock 6 to the IOCON block for programmable glitch
+ filter */
+ __IO uint32_t IOCONCLKDIV5; /*!< Peripheral clock 5 to the IOCON block for programmable glitch
+ filter */
+ __IO uint32_t IOCONCLKDIV4; /*!< Peripheral clock 4 to the IOCON block for programmable glitch
+ filter */
+ __IO uint32_t IOCONCLKDIV3; /*!< Peripheral clock 3 to the IOCON block for programmable glitch
+ filter */
+ __IO uint32_t IOCONCLKDIV2; /*!< Peripheral clock 2 to the IOCON block for programmable glitch
+ filter */
+ __IO uint32_t IOCONCLKDIV1; /*!< Peripheral clock 1 to the IOCON block for programmable glitch
+ filter */
+ __IO uint32_t IOCONCLKDIV0; /*!< Peripheral clock 0 to the IOCON block for programmable glitch
+ filter */
+ __IO uint32_t BODCTRL; /*!< Brown-Out Detect */
+ __IO uint32_t SYSTCKCAL; /*!< System tick counter calibration */
+ __IO uint32_t AHBMATRIXPRIO; /*!< AHB matrix priority configuration */
+ __I uint32_t RESERVED11[5];
+ __IO uint32_t IRQLATENCY; /*!< IRQ delay. Allows trade-off between interrupt latency and determinism. */
+ __IO uint32_t NMISRC; /*!< NMI Source Control */
+ union {
+ __IO uint32_t PINTSEL[8];
+ struct {
+ __IO uint32_t PINTSEL0; /*!< GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL1; /*!< GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL2; /*!< GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL3; /*!< GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL4; /*!< GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL5; /*!< GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL6; /*!< GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t PINTSEL7; /*!< GPIO Pin Interrupt Select register 0 */
+ };
+ };
+ __IO uint32_t USBCLKCTRL; /*!< USB clock control */
+ __I uint32_t USBCLKST; /*!< USB clock status */
+ __I uint32_t RESERVED12[25];
+ __IO uint32_t STARTERP0; /*!< Start logic 0 interrupt wake-up enable register 0 */
+ __I uint32_t RESERVED13[3];
+ __IO uint32_t STARTERP1; /*!< Start logic 1 interrupt wake-up enable register 1 */
+ __I uint32_t RESERVED14[6];
+ __IO uint32_t PDSLEEPCFG; /*!< Power-down states in deep-sleep mode */
+ __IO uint32_t PDAWAKECFG; /*!< Power-down states for wake-up from deep-sleep */
+ __IO uint32_t PDRUNCFG; /*!< Power configuration register */
+ __I uint32_t RESERVED15[110];
+ __I uint32_t DEVICE_ID; /*!< Device ID */
+} LPC_SYSCON_Type;
+
+
+/* ================================================================================ */
+/* ================ USART4 ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief USART4 (USART4)
+ */
+
+typedef struct { /*!< USART4 Structure */
+ __IO uint32_t CFG; /*!< USART Configuration register. Basic USART configuration settings
+ that typically are not changed during operation. */
+ __IO uint32_t CTL; /*!< USART Control register. USART control settings that are more
+ likely to change during operation. */
+ __IO uint32_t STAT; /*!< USART Status register. The complete status value can be read
+ here. Writing ones clears some bits in the register. Some bits
+ can be cleared by writing a 1 to them. */
+ __IO uint32_t INTENSET; /*!< Interrupt Enable read and Set register. Contains an individual
+ interrupt enable bit for each potential USART interrupt. A complete
+ value may be read from this register. Writing a 1 to any implemented
+ bit position causes that bit to be set. */
+ __O uint32_t INTENCLR; /*!< Interrupt Enable Clear register. Allows clearing any combination
+ of bits in the INTENSET register. Writing a 1 to any implemented
+ bit position causes the corresponding bit to be cleared. */
+ __I uint32_t RXDAT; /*!< Receiver Data register. Contains the last character received. */
+ __I uint32_t RXDATSTAT; /*!< Receiver Data with Status register. Combines the last character
+ received with the current USART receive status. Allows DMA or
+ software to recover incoming data and status together. */
+ __IO uint32_t TXDAT; /*!< Transmit Data register. Data to be transmitted is written here. */
+ __IO uint32_t BRG; /*!< Baud Rate Generator register. 16-bit integer baud rate divisor
+ value. */
+ __I uint32_t INTSTAT; /*!< Interrupt status register. Reflects interrupts that are currently
+ enabled. */
+ __IO uint32_t OSR; /*!< Oversample selection register for asynchronous communication. */
+ __IO uint32_t ADDR; /*!< Address register for automatic address matching. */
+} LPC_USART4_Type;
+
+
+/* ================================================================================ */
+/* ================ GINT0 ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief GPIO group interrupt 0 (GINT0)
+ */
+
+typedef struct { /*!< GINT0 Structure */
+ __IO uint32_t CTRL; /*!< GPIO grouped interrupt control register */
+ __I uint32_t RESERVED0[7];
+ __IO uint32_t PORT_POL[3]; /*!< GPIO grouped interrupt port 0 polarity register */
+ __I uint32_t RESERVED1[5];
+ __IO uint32_t PORT_ENA[3]; /*!< GPIO grouped interrupt port enable register */
+} LPC_GINT0_Type;
+
+
+/* ================================================================================ */
+/* ================ USB ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief USB device controller (USB)
+ */
+
+typedef struct { /*!< USB Structure */
+ __IO uint32_t DEVCMDSTAT; /*!< USB Device Command/Status register */
+ __IO uint32_t INFO; /*!< USB Info register */
+ __IO uint32_t EPLISTSTART; /*!< USB EP Command/Status List start address */
+ __IO uint32_t DATABUFSTART; /*!< USB Data buffer start address */
+ __IO uint32_t LPM; /*!< Link Power Management register */
+ __IO uint32_t EPSKIP; /*!< USB Endpoint skip */
+ __IO uint32_t EPINUSE; /*!< USB Endpoint Buffer in use */
+ __IO uint32_t EPBUFCFG; /*!< USB Endpoint Buffer Configuration register */
+ __IO uint32_t INTSTAT; /*!< USB interrupt status register */
+ __IO uint32_t INTEN; /*!< USB interrupt enable register */
+ __IO uint32_t INTSETSTAT; /*!< USB set interrupt status register */
+ __IO uint32_t INTROUTING; /*!< USB interrupt routing register */
+ __I uint32_t RESERVED0;
+ __I uint32_t EPTOGGLE; /*!< USB Endpoint toggle register */
+} LPC_USB_Type;
+
+
+/* ================================================================================ */
+/* ================ CRC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Cyclic Redundancy Check (CRC) engine (CRC)
+ */
+
+typedef struct { /*!< CRC Structure */
+ __IO uint32_t MODE; /*!< CRC mode register */
+ __IO uint32_t SEED; /*!< CRC seed register */
+
+ union {
+ __O uint32_t WR_DATA; /*!< CRC data register */
+ __I uint32_t SUM; /*!< CRC checksum register */
+ };
+} LPC_CRC_Type;
+
+
+/* ================================================================================ */
+/* ================ DMA ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Product name title=Kylin UM Chapter title=KylinDMA controller Modification date=5/13/2013 Major revision=0 Minor revision=1 (DMA)
+ */
+
+typedef struct { /*!< DMA Structure */
+ __IO uint32_t CTRL; /*!< DMA control. */
+ __I uint32_t INTSTAT; /*!< Interrupt status. */
+ __IO uint32_t SRAMBASE; /*!< SRAM address of the channel configuration table. */
+ __I uint32_t RESERVED0[5];
+ __IO uint32_t ENABLESET0; /*!< Channel Enable read and Set for all DMA channels. */
+ __I uint32_t RESERVED1;
+ __O uint32_t ENABLECLR0; /*!< Channel Enable Clear for all DMA channels. */
+ __I uint32_t RESERVED2;
+ __I uint32_t ACTIVE0; /*!< Channel Active status for all DMA channels. */
+ __I uint32_t RESERVED3;
+ __I uint32_t BUSY0; /*!< Channel Busy status for all DMA channels. */
+ __I uint32_t RESERVED4;
+ __IO uint32_t ERRINT0; /*!< Error Interrupt status for all DMA channels. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t INTENSET0; /*!< Interrupt Enable read and Set for all DMA channels. */
+ __I uint32_t RESERVED6;
+ __O uint32_t INTENCLR0; /*!< Interrupt Enable Clear for all DMA channels. */
+ __I uint32_t RESERVED7;
+ __IO uint32_t INTA0; /*!< Interrupt A status for all DMA channels. */
+ __I uint32_t RESERVED8;
+ __IO uint32_t INTB0; /*!< Interrupt B status for all DMA channels. */
+ __I uint32_t RESERVED9;
+ __O uint32_t SETVALID0; /*!< Set ValidPending control bits for all DMA channels. */
+ __I uint32_t RESERVED10;
+ __O uint32_t SETTRIG0; /*!< Set Trigger control bits for all DMA channels. */
+ __I uint32_t RESERVED11;
+ __O uint32_t ABORT0; /*!< Channel Abort control for all DMA channels. */
+ __I uint32_t RESERVED12[225];
+ __IO uint32_t CFG0; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT0; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG0; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED13;
+ __IO uint32_t CFG1; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT1; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG1; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED14;
+ __IO uint32_t CFG2; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT2; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG2; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED15;
+ __IO uint32_t CFG3; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT3; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG3; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED16;
+ __IO uint32_t CFG4; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT4; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG4; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED17;
+ __IO uint32_t CFG5; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT5; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG5; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED18;
+ __IO uint32_t CFG6; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT6; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG6; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED19;
+ __IO uint32_t CFG7; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT7; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG7; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED20;
+ __IO uint32_t CFG8; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT8; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG8; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED21;
+ __IO uint32_t CFG9; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT9; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG9; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED22;
+ __IO uint32_t CFG10; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT10; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG10; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED23;
+ __IO uint32_t CFG11; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT11; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG11; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED24;
+ __IO uint32_t CFG12; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT12; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG12; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED25;
+ __IO uint32_t CFG13; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT13; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG13; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED26;
+ __IO uint32_t CFG14; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT14; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG14; /*!< Transfer configuration register for DMA channel 0. */
+ __I uint32_t RESERVED27;
+ __IO uint32_t CFG15; /*!< Configuration register for DMA channel 0. */
+ __I uint32_t CTLSTAT15; /*!< Control and status register for DMA channel 0. */
+ __IO uint32_t XFERCFG15; /*!< Transfer configuration register for DMA channel 0. */
+} LPC_DMA_Type;
+
+
+/* ================================================================================ */
+/* ================ SCT0 ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Product name title=Kylin UM Chapter title=KylinState Configurable Timers (SCT0/1) Modification date=5/14/2013 Major revision=0 Minor revision=1 (SCT0)
+ */
+
+typedef struct { /*!< SCT0 Structure */
+ __IO uint32_t CONFIG; /*!< SCT configuration register */
+ __IO uint32_t CTRL; /*!< SCT control register */
+ __IO uint32_t LIMIT; /*!< SCT limit register */
+ __IO uint32_t HALT; /*!< SCT halt condition register */
+ __IO uint32_t STOP; /*!< SCT stop condition register */
+ __IO uint32_t START; /*!< SCT start condition register */
+ __I uint32_t RESERVED0[10];
+ __IO uint32_t COUNT; /*!< SCT counter register */
+ __IO uint32_t STATE; /*!< SCT state register */
+ __I uint32_t INPUT; /*!< SCT input register */
+ __IO uint32_t REGMODE; /*!< SCT match/capture registers mode register */
+ __IO uint32_t OUTPUT; /*!< SCT output register */
+ __IO uint32_t OUTPUTDIRCTRL; /*!< SCT output counter direction control register */
+ __IO uint32_t RES; /*!< SCT conflict resolution register */
+ __IO uint32_t DMAREQ0; /*!< SCT DMA request 0 register */
+ __IO uint32_t DMAREQ1; /*!< SCT DMA request 1 register */
+ __I uint32_t RESERVED1[35];
+ __IO uint32_t EVEN; /*!< SCT event enable register */
+ __IO uint32_t EVFLAG; /*!< SCT event flag register */
+ __IO uint32_t CONEN; /*!< SCT conflict enable register */
+ __IO uint32_t CONFLAG; /*!< SCT conflict flag register */
+
+ union {
+ __IO uint32_t CAP0; /*!< SCT capture register of capture channel 0 to 4; REGMOD0 to REGMODE4
+ = 1 */
+ __IO uint32_t MATCH0; /*!< SCT match value register of match channels 0 to 4; REGMOD0 to
+ REGMODE4 = 0 */
+ };
+
+ union {
+ __IO uint32_t CAP1; /*!< SCT capture register of capture channel 0 to 4; REGMOD0 to REGMODE4
+ = 1 */
+ __IO uint32_t MATCH1; /*!< SCT match value register of match channels 0 to 4; REGMOD0 to
+ REGMODE4 = 0 */
+ };
+
+ union {
+ __IO uint32_t MATCH2; /*!< SCT match value register of match channels 0 to 4; REGMOD0 to
+ REGMODE4 = 0 */
+ __IO uint32_t CAP2; /*!< SCT capture register of capture channel 0 to 4; REGMOD0 to REGMODE4
+ = 1 */
+ };
+
+ union {
+ __IO uint32_t CAP3; /*!< SCT capture register of capture channel 0 to 4; REGMOD0 to REGMODE4
+ = 1 */
+ __IO uint32_t MATCH3; /*!< SCT match value register of match channels 0 to 4; REGMOD0 to
+ REGMODE4 = 0 */
+ };
+
+ union {
+ __IO uint32_t CAP4; /*!< SCT capture register of capture channel 0 to 4; REGMOD0 to REGMODE4
+ = 1 */
+ __IO uint32_t MATCH4; /*!< SCT match value register of match channels 0 to 4; REGMOD0 to
+ REGMODE4 = 0 */
+ };
+ __I uint32_t RESERVED2[59];
+
+ union {
+ __IO uint32_t CAPCTRL0; /*!< SCT capture control register 0 to 4; REGMOD0 = 1 to REGMODE4
+ = 1 */
+ __IO uint32_t MATCHREL0; /*!< SCT match reload value register 0 to 4; REGMOD0 = 0 to REGMODE4
+ = 0 */
+ };
+
+ union {
+ __IO uint32_t MATCHREL1; /*!< SCT match reload value register 0 to 4; REGMOD0 = 0 to REGMODE4
+ = 0 */
+ __IO uint32_t CAPCTRL1; /*!< SCT capture control register 0 to 4; REGMOD0 = 1 to REGMODE4
+ = 1 */
+ };
+
+ union {
+ __IO uint32_t MATCHREL2; /*!< SCT match reload value register 0 to 4; REGMOD0 = 0 to REGMODE4
+ = 0 */
+ __IO uint32_t CAPCTRL2; /*!< SCT capture control register 0 to 4; REGMOD0 = 1 to REGMODE4
+ = 1 */
+ };
+
+ union {
+ __IO uint32_t CAPCTRL3; /*!< SCT capture control register 0 to 4; REGMOD0 = 1 to REGMODE4
+ = 1 */
+ __IO uint32_t MATCHREL3; /*!< SCT match reload value register 0 to 4; REGMOD0 = 0 to REGMODE4
+ = 0 */
+ };
+
+ union {
+ __IO uint32_t CAPCTRL4; /*!< SCT capture control register 0 to 4; REGMOD0 = 1 to REGMODE4
+ = 1 */
+ __IO uint32_t MATCHREL4; /*!< SCT match reload value register 0 to 4; REGMOD0 = 0 to REGMODE4
+ = 0 */
+ };
+ __I uint32_t RESERVED3[59];
+ __IO uint32_t EV0_STATE; /*!< SCT event state register 0 */
+ __IO uint32_t EV0_CTRL; /*!< SCT event control register 0 */
+ __IO uint32_t EV1_STATE; /*!< SCT event state register 0 */
+ __IO uint32_t EV1_CTRL; /*!< SCT event control register 0 */
+ __IO uint32_t EV2_STATE; /*!< SCT event state register 0 */
+ __IO uint32_t EV2_CTRL; /*!< SCT event control register 0 */
+ __IO uint32_t EV3_STATE; /*!< SCT event state register 0 */
+ __IO uint32_t EV3_CTRL; /*!< SCT event control register 0 */
+ __IO uint32_t EV4_STATE; /*!< SCT event state register 0 */
+ __IO uint32_t EV4_CTRL; /*!< SCT event control register 0 */
+ __IO uint32_t EV5_STATE; /*!< SCT event state register 0 */
+ __IO uint32_t EV5_CTRL; /*!< SCT event control register 0 */
+ __I uint32_t RESERVED4[116];
+ __IO uint32_t OUT0_SET; /*!< SCT output 0 set register */
+ __IO uint32_t OUT0_CLR; /*!< SCT output 0 clear register */
+ __IO uint32_t OUT1_SET; /*!< SCT output 0 set register */
+ __IO uint32_t OUT1_CLR; /*!< SCT output 0 clear register */
+ __IO uint32_t OUT2_SET; /*!< SCT output 0 set register */
+ __IO uint32_t OUT2_CLR; /*!< SCT output 0 clear register */
+ __IO uint32_t OUT3_SET; /*!< SCT output 0 set register */
+ __IO uint32_t OUT3_CLR; /*!< SCT output 0 clear register */
+} LPC_SCT0_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIO_PORT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief General Purpose I/O (GPIO) (GPIO_PORT)
+ */
+
+typedef struct { /*!< GPIO_PORT Structure */
+ __IO uint8_t B[88]; /*!< Byte pin registers */
+ __I uint32_t RESERVED0[42];
+ __IO uint32_t W[88]; /*!< Word pin registers */
+ __I uint32_t RESERVED1[1896];
+ __IO uint32_t DIR[3]; /*!< Port Direction registers */
+ __I uint32_t RESERVED2[29];
+ __IO uint32_t MASK[3]; /*!< Port Mask register */
+ __I uint32_t RESERVED3[29];
+ __IO uint32_t PIN[3]; /*!< Port pin register */
+ __I uint32_t RESERVED4[29];
+ __IO uint32_t MPIN[3]; /*!< Masked port register */
+ __I uint32_t RESERVED5[29];
+ __IO uint32_t SET[3]; /*!< Write: Set port register Read: port output bits */
+ __I uint32_t RESERVED6[29];
+ __O uint32_t CLR[3]; /*!< Clear port */
+ __I uint32_t RESERVED7[29];
+ __O uint32_t NOT[3]; /*!< Toggle port */
+} LPC_GPIO_PORT_Type;
+
+
+/* ================================================================================ */
+/* ================ PINT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Pin interruptand pattern match (PINT) (PINT)
+ */
+
+typedef struct { /*!< PINT Structure */
+ __IO uint32_t ISEL; /*!< Pin Interrupt Mode register */
+ __IO uint32_t IENR; /*!< Pin interrupt level or rising edge interrupt enable register */
+ __O uint32_t SIENR; /*!< Pin interrupt level or rising edge interrupt set register */
+ __O uint32_t CIENR; /*!< Pin interrupt level (rising edge interrupt) clear register */
+ __IO uint32_t IENF; /*!< Pin interrupt active level or falling edge interrupt enable
+ register */
+ __O uint32_t SIENF; /*!< Pin interrupt active level or falling edge interrupt set register */
+ __O uint32_t CIENF; /*!< Pin interrupt active level or falling edge interrupt clear register */
+ __IO uint32_t RISE; /*!< Pin interrupt rising edge register */
+ __IO uint32_t FALL; /*!< Pin interrupt falling edge register */
+ __IO uint32_t IST; /*!< Pin interrupt status register */
+ __IO uint32_t PMCTRL; /*!< Pattern match interrupt control register */
+ __IO uint32_t PMSRC; /*!< Pattern match interrupt bit-slice source register */
+ __IO uint32_t PMCFG; /*!< Pattern match interrupt bit slice configuration register */
+} LPC_PINT_Type;
+
+
+/* -------------------- End of section using anonymous unions ------------------- */
+#if defined(__CC_ARM)
+ #pragma pop
+#elif defined(__ICCARM__)
+ /* leave anonymous unions enabled */
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning restore
+#else
+ #warning Not supported compiler type
+#endif
+
+
+
+
+/* ================================================================================ */
+/* ================ Peripheral memory map ================ */
+/* ================================================================================ */
+
+#define LPC_I2C0_BASE 0x40000000UL
+#define LPC_WWDT_BASE 0x40004000UL
+#define LPC_USART0_BASE 0x40008000UL
+#define LPC_CT16B0_BASE 0x4000C000UL
+#define LPC_CT16B1_BASE 0x40010000UL
+#define LPC_CT32B0_BASE 0x40014000UL
+#define LPC_CT32B1_BASE 0x40018000UL
+#define LPC_ADC_BASE 0x4001C000UL
+#define LPC_I2C1_BASE 0x40020000UL
+#define LPC_RTC_BASE 0x40024000UL
+#define LPC_DMATRIGMUX_BASE 0x40028000UL
+#define LPC_PMU_BASE 0x40038000UL
+#define LPC_FLASHCTRL_BASE 0x4003C000UL
+#define LPC_SSP0_BASE 0x40040000UL
+#define LPC_IOCON_BASE 0x40044000UL
+#define LPC_SYSCON_BASE 0x40048000UL
+#define LPC_USART4_BASE 0x4004C000UL
+#define LPC_SSP1_BASE 0x40058000UL
+#define LPC_GINT0_BASE 0x4005C000UL
+#define LPC_GINT1_BASE 0x40060000UL
+#define LPC_USART1_BASE 0x4006C000UL
+#define LPC_USART2_BASE 0x40070000UL
+#define LPC_USART3_BASE 0x40074000UL
+#define LPC_USB_BASE 0x40080000UL
+#define LPC_CRC_BASE 0x50000000UL
+#define LPC_DMA_BASE 0x50004000UL
+#define LPC_SCT0_BASE 0x5000C000UL
+#define LPC_SCT1_BASE 0x5000E000UL
+#define LPC_GPIO_PORT_BASE 0xA0000000UL
+#define LPC_PINT_BASE 0xA0004000UL
+
+
+/* ================================================================================ */
+/* ================ Peripheral declaration ================ */
+/* ================================================================================ */
+
+#define LPC_I2C0 ((LPC_I2C0_Type *) LPC_I2C0_BASE)
+#define LPC_WWDT ((LPC_WWDT_Type *) LPC_WWDT_BASE)
+#define LPC_USART0 ((LPC_USART0_Type *) LPC_USART0_BASE)
+#define LPC_CT16B0 ((LPC_CT16B0_Type *) LPC_CT16B0_BASE)
+#define LPC_CT16B1 ((LPC_CT16B0_Type *) LPC_CT16B1_BASE)
+#define LPC_CT32B0 ((LPC_CT32B0_Type *) LPC_CT32B0_BASE)
+#define LPC_CT32B1 ((LPC_CT32B0_Type *) LPC_CT32B1_BASE)
+#define LPC_ADC ((LPC_ADC_Type *) LPC_ADC_BASE)
+#define LPC_I2C1 ((LPC_I2C0_Type *) LPC_I2C1_BASE)
+#define LPC_RTC ((LPC_RTC_Type *) LPC_RTC_BASE)
+#define LPC_DMATRIGMUX ((LPC_DMATRIGMUX_Type *) LPC_DMATRIGMUX_BASE)
+#define LPC_PMU ((LPC_PMU_Type *) LPC_PMU_BASE)
+#define LPC_FLASHCTRL ((LPC_FLASHCTRL_Type *) LPC_FLASHCTRL_BASE)
+#define LPC_SSP0 ((LPC_SSP0_Type *) LPC_SSP0_BASE)
+#define LPC_IOCON ((LPC_IOCON_Type *) LPC_IOCON_BASE)
+#define LPC_SYSCON ((LPC_SYSCON_Type *) LPC_SYSCON_BASE)
+#define LPC_USART4 ((LPC_USART4_Type *) LPC_USART4_BASE)
+#define LPC_SSP1 ((LPC_SSP0_Type *) LPC_SSP1_BASE)
+#define LPC_GINT0 ((LPC_GINT0_Type *) LPC_GINT0_BASE)
+#define LPC_GINT1 ((LPC_GINT0_Type *) LPC_GINT1_BASE)
+#define LPC_USART1 ((LPC_USART4_Type *) LPC_USART1_BASE)
+#define LPC_USART2 ((LPC_USART4_Type *) LPC_USART2_BASE)
+#define LPC_USART3 ((LPC_USART4_Type *) LPC_USART3_BASE)
+#define LPC_USB ((LPC_USB_Type *) LPC_USB_BASE)
+#define LPC_CRC ((LPC_CRC_Type *) LPC_CRC_BASE)
+#define LPC_DMA ((LPC_DMA_Type *) LPC_DMA_BASE)
+#define LPC_SCT0 ((LPC_SCT0_Type *) LPC_SCT0_BASE)
+#define LPC_SCT1 ((LPC_SCT0_Type *) LPC_SCT1_BASE)
+#define LPC_GPIO_PORT ((LPC_GPIO_PORT_Type *) LPC_GPIO_PORT_BASE)
+#define LPC_PINT ((LPC_PINT_Type *) LPC_PINT_BASE)
+
+
+/** @} */ /* End of group Device_Peripheral_Registers */
+/** @} */ /* End of group LPC11U6x */
+/** @} */ /* End of group (null) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* LPC11U6x_H */
+