File content as of revision 1:ea0f7b1c5daf:

#include "mbed.h"
#include "GLCD.h"

#include "Bg_16bpp_t.h"
#include "Bg_16bpp_l.h"
#include "Bg_16bpp_r.h"
#include "Bg_16bpp_b.h"
#include "ARM_Ani_16bpp.h"

//Host PC Baudrate (Virtual Com Port on USB)
#define D_BAUDRATE            9600
//#define D_BAUDRATE            57600

//extern unsigned short driverCode;

#define LANDTIGER 1

// Variables for Heartbeat and Status monitoring
#ifdef LANDTIGER
DigitalOut myled1(P2_0);
DigitalOut myled2(P2_1);
DigitalOut myled3(P2_2);
DigitalOut myled4(P2_3);
DigitalOut myled5(P2_4);
DigitalOut myled6(P2_5);
DigitalOut myled7(P2_6);
DigitalOut myled8(P2_7);


//DigitalOut heartbeatLED(LED4);
DigitalOut heartbeatLED(P3_26);      //SD_PWR, active low
//DigitalOut USB_Host_Power(P1_19);   //USB Power, active low

// Need this override function on non-mbed hardware to provide the MAC address.
//
// The mbed Ethernet library sets the MAC address by calling a weak function
// extern "C" void mbed_mac_address(char * mac) to copy in a 6 Byte (12 character) MAC address.
// This function performs a semihosting request to the mbed interface to get the serial number,
// which contains a MAC address unique to every mbed device.
// If you are using the eth library on your own board (i.e. not an mbed board),
// you should implement your own extern "C" void mbed_mac_address(char * mac) function
// to overwrite the existing one and avoid a call to the interface (which doesnt exist).


extern "C" void mbed_mac_address(char * mac) {

//mbed module clone
//  mac[0] = 0x00;  
//  mac[1] = 0x02;  
//  mac[2] = 0xF7;  
//  mac[3] = 0xF0;  
//  mac[4] = 0x56;  
//  mac[5] = 0x90;            

//KPN Experia
  mac[0] = 0x00;  
  mac[1] = 0x01;  
  mac[2] = 0xE3;  
  mac[3] = 0x55;  
  mac[4] = 0xA1;  
  mac[5] = 0xC7;           
  
};

#else
DigitalOut myled1(LED1);
DigitalOut myled2(LED2);
DigitalOut myled3(LED3);
DigitalOut heartbeatLED(LED4);
#endif


// Host PC Communication channels
Serial pc(USBTX, USBRX); // tx, rx

// Variables for Heartbeat and Status monitoring
Ticker heartbeat;
bool heartbeatflag=false;

Ticker LCD_Ani;

void clear_screen() {
//ANSI Terminal Commands
    pc.printf("\x1B[2J");
    pc.printf("\x1B[H");
}

void init_interfaces() {
    // Init Host PC communication, default is 9600
    pc.baud(D_BAUDRATE);
      
    //Done, Tell me about it
//    show_LEDS();
}
      

// Heartbeat monitor
void pulse() {
  heartbeatLED = !heartbeatLED;

#ifdef LANDTIGER
//  myled1 = heartbeatLED;
//  myled2 = heartbeatLED;
//  myled3 = heartbeatLED;
//  myled4 = heartbeatLED;      

//  myled5 = !heartbeatLED;
//  myled6 = !heartbeatLED;
//  myled7 = !heartbeatLED;
//  myled8 = !heartbeatLED;      

#endif  
  
}

void heartbeat_start() {
  heartbeatLED = 1;
  heartbeat.attach(&pulse, 0.5);
}

void heartbeat_stop() {
  heartbeat.detach();
}


// LCD Animation
void LCD_pulse() {
  static int pic =  0;
  
  if (pic++ > 8) pic = 0;
  GLCD_Bmp (99, 99, 120, 45, (unsigned char*) &ARM_Ani_16bpp[pic*(120*45*2)]);
}

void LCD_Ani_start() {
//  LCD_Ani.attach(&LCD_pulse, 0.05);
  LCD_Ani.attach(&LCD_pulse, 0.25);  
}

void LCD_Ani_stop() {
  LCD_Ani.detach();
}



int main() {
    init_interfaces();
    
    heartbeat_start();

    clear_screen(); 
  
    pc.printf("Hello World!\n\r");

    GLCD_Init();
    GLCD_Clear(White);
//    GLCD_Clear(Blue);    
//    GLCD_Bmp(  0,   0, 320,  69, (unsigned char*) Bg_16bpp_t+70);
//    GLCD_Bmp(  0,  69,   4, 102, (unsigned char*) Bg_16bpp_l+70);
//    GLCD_Bmp(316,  69,   4, 102, (unsigned char*) Bg_16bpp_r+70);
//    GLCD_Bmp(  0, 171, 320,  69, (unsigned char*) Bg_16bpp_b+70);
//    GLCD_Bmp(  0, 171, 320,  69, (unsigned char*) Bg_16bpp_t+70);    

    GLCD_SetTextColor   (Red);
    GLCD_SetBackColor   (White);
    GLCD_DisplayString (8, 1, (unsigned char*) "Hi Willem");

    LCD_Ani_start();

    GLCD_drawRect (10, 10, 100, 100);

    GLCD_SetTextColor   (Green);    
    GLCD_drawHLine (20, 20, 50);
    GLCD_drawVLine (30, 30, 50);
    
    pc.printf("LCD Controller ID = 0x%04X\n\r", GLCD_DriverCode());    
    
    while(1) {
      pc.printf("+"); 
            
      wait(0.1);
    };
    
    pc.printf("Bye World!\n\r");   
}