Diff: EthernetInterface/lwip/netif/slipif.c

Revision:

9:58eb378727d9

Parent:

8:80d49dd91542

Child:

10:0b5e0dfee08e

--- a/EthernetInterface/lwip/netif/slipif.c	Wed Oct 01 13:27:35 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,367 +0,0 @@
-/**
- * @file
- * SLIP Interface
- *
- */
-
-/*
- * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
- * All rights reserved. 
- *
- * Redistribution and use in source and binary forms, with or without 
- * modification, are permitted provided that the following conditions 
- * are met: 
- * 1. Redistributions of source code must retain the above copyright 
- *    notice, this list of conditions and the following disclaimer. 
- * 2. Redistributions in binary form must reproduce the above copyright 
- *    notice, this list of conditions and the following disclaimer in the 
- *    documentation and/or other materials provided with the distribution. 
- * 3. Neither the name of the Institute nor the names of its contributors 
- *    may be used to endorse or promote products derived from this software 
- *    without specific prior written permission. 
- *
- * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
- * SUCH DAMAGE. 
- *
- * This file is built upon the file: src/arch/rtxc/netif/sioslip.c
- *
- * Author: Magnus Ivarsson <magnus.ivarsson(at)volvo.com> 
- */
-
-/* 
- * This is an arch independent SLIP netif. The specific serial hooks must be
- * provided by another file. They are sio_open, sio_read/sio_tryread and sio_send
- */
-
-#include "netif/slipif.h"
-#include "lwip/opt.h"
-
-#if LWIP_HAVE_SLIPIF
-
-#include "lwip/def.h"
-#include "lwip/pbuf.h"
-#include "lwip/sys.h"
-#include "lwip/stats.h"
-#include "lwip/snmp.h"
-#include "lwip/sio.h"
-
-#define SLIP_BLOCK     1
-#define SLIP_DONTBLOCK 0
-
-#define SLIP_END     0300 /* 0xC0 */
-#define SLIP_ESC     0333 /* 0xDB */
-#define SLIP_ESC_END 0334 /* 0xDC */
-#define SLIP_ESC_ESC 0335 /* 0xDD */
-
-#define SLIP_MAX_SIZE 1500
-
-enum slipif_recv_state {
-    SLIP_RECV_NORMAL,
-    SLIP_RECV_ESCAPE,
-};
-
-struct slipif_priv {
-  sio_fd_t sd;
-  /* q is the whole pbuf chain for a packet, p is the current pbuf in the chain */
-  struct pbuf *p, *q;
-  enum slipif_recv_state state;
-  u16_t i, recved;
-};
-
-/**
- * Send a pbuf doing the necessary SLIP encapsulation
- *
- * Uses the serial layer's sio_send()
- *
- * @param netif the lwip network interface structure for this slipif
- * @param p the pbuf chaing packet to send
- * @param ipaddr the ip address to send the packet to (not used for slipif)
- * @return always returns ERR_OK since the serial layer does not provide return values
- */
-err_t
-slipif_output(struct netif *netif, struct pbuf *p, ip_addr_t *ipaddr)
-{
-  struct slipif_priv *priv;
-  struct pbuf *q;
-  u16_t i;
-  u8_t c;
-
-  LWIP_ASSERT("netif != NULL", (netif != NULL));
-  LWIP_ASSERT("netif->state != NULL", (netif->state != NULL));
-  LWIP_ASSERT("p != NULL", (p != NULL));
-
-  LWIP_UNUSED_ARG(ipaddr);
-
-  priv = netif->state;
-
-  /* Send pbuf out on the serial I/O device. */
-  sio_send(SLIP_END, priv->sd);
-
-  for (q = p; q != NULL; q = q->next) {
-    for (i = 0; i < q->len; i++) {
-      c = ((u8_t *)q->payload)[i];
-      switch (c) {
-      case SLIP_END:
-        sio_send(SLIP_ESC, priv->sd);
-        sio_send(SLIP_ESC_END, priv->sd);
-        break;
-      case SLIP_ESC:
-        sio_send(SLIP_ESC, priv->sd);
-        sio_send(SLIP_ESC_ESC, priv->sd);
-        break;
-      default:
-        sio_send(c, priv->sd);
-        break;
-      }
-    }
-  }
-  sio_send(SLIP_END, priv->sd);
-  return ERR_OK;
-}
-
-/**
- * Static function for easy use of blockig or non-blocking
- * sio_read
- *
- * @param fd serial device handle
- * @param data pointer to data buffer for receiving
- * @param len maximum length (in bytes) of data to receive
- * @param block if 1, call sio_read; if 0, call sio_tryread
- * @return return value of sio_read of sio_tryread
- */
-static u32_t
-slip_sio_read(sio_fd_t fd, u8_t* data, u32_t len, u8_t block)
-{
-  if (block) {
-    return sio_read(fd, data, len);
-  } else {
-    return sio_tryread(fd, data, len);
-  }
-}
-
-/**
- * Handle the incoming SLIP stream character by character
- *
- * Poll the serial layer by calling sio_read() or sio_tryread().
- *
- * @param netif the lwip network interface structure for this slipif
- * @param block if 1, block until data is received; if 0, return when all data
- *        from the buffer is received (multiple calls to this function will
- *        return a complete packet, NULL is returned before - used for polling)
- * @return The IP packet when SLIP_END is received
- */
-static struct pbuf *
-slipif_input(struct netif *netif, u8_t block)
-{
-  struct slipif_priv *priv;
-  u8_t c;
-  struct pbuf *t;
-
-  LWIP_ASSERT("netif != NULL", (netif != NULL));
-  LWIP_ASSERT("netif->state != NULL", (netif->state != NULL));
-
-  priv = netif->state;
-
-  while (slip_sio_read(priv->sd, &c, 1, block) > 0) {
-    switch (priv->state) {
-    case SLIP_RECV_NORMAL:
-      switch (c) {
-      case SLIP_END:
-        if (priv->recved > 0) {
-          /* Received whole packet. */
-          /* Trim the pbuf to the size of the received packet. */
-          pbuf_realloc(priv->q, priv->recved);
-
-          LINK_STATS_INC(link.recv);
-
-          LWIP_DEBUGF(SLIP_DEBUG, ("slipif: Got packet\n"));
-          t = priv->q;
-          priv->p = priv->q = NULL;
-          priv->i = priv->recved = 0;
-          return t;
-        }
-        continue;
-      case SLIP_ESC:
-        priv->state = SLIP_RECV_ESCAPE;
-        continue;
-      }
-      break;
-    case SLIP_RECV_ESCAPE:
-      switch (c) {
-      case SLIP_ESC_END:
-        c = SLIP_END;
-        break;
-      case SLIP_ESC_ESC:
-        c = SLIP_ESC;
-        break;
-      }
-      priv->state = SLIP_RECV_NORMAL;
-      /* FALLTHROUGH */
-    }
-
-    /* byte received, packet not yet completely received */
-    if (priv->p == NULL) {
-      /* allocate a new pbuf */
-      LWIP_DEBUGF(SLIP_DEBUG, ("slipif_input: alloc\n"));
-      priv->p = pbuf_alloc(PBUF_LINK, (PBUF_POOL_BUFSIZE - PBUF_LINK_HLEN), PBUF_POOL);
-
-      if (priv->p == NULL) {
-        LINK_STATS_INC(link.drop);
-        LWIP_DEBUGF(SLIP_DEBUG, ("slipif_input: no new pbuf! (DROP)\n"));
-        /* don't process any further since we got no pbuf to receive to */
-        break;
-      }
-
-      if (priv->q != NULL) {
-        /* 'chain' the pbuf to the existing chain */
-        pbuf_cat(priv->q, priv->p);
-      } else {
-        /* p is the first pbuf in the chain */
-        priv->q = priv->p;
-      }
-    }
-
-    /* this automatically drops bytes if > SLIP_MAX_SIZE */
-    if ((priv->p != NULL) && (priv->recved <= SLIP_MAX_SIZE)) {
-      ((u8_t *)priv->p->payload)[priv->i] = c;
-      priv->recved++;
-      priv->i++;
-      if (priv->i >= priv->p->len) {
-        /* on to the next pbuf */
-        priv->i = 0;
-        if (priv->p->next != NULL && priv->p->next->len > 0) {
-          /* p is a chain, on to the next in the chain */
-            priv->p = priv->p->next;
-        } else {
-          /* p is a single pbuf, set it to NULL so next time a new
-           * pbuf is allocated */
-            priv->p = NULL;
-        }
-      }
-    }
-  }
-
-  return NULL;
-}
-
-#if !NO_SYS
-/**
- * The SLIP input thread.
- *
- * Feed the IP layer with incoming packets
- *
- * @param nf the lwip network interface structure for this slipif
- */
-static void
-slipif_loop_thread(void *nf)
-{
-  struct pbuf *p;
-  struct netif *netif = (struct netif *)nf;
-
-  while (1) {
-    p = slipif_input(netif, SLIP_BLOCK);
-    if (p != NULL) {
-      if (netif->input(p, netif) != ERR_OK) {
-        pbuf_free(p);
-        p = NULL;
-      }
-    }
-  }
-}
-#endif /* !NO_SYS */
-
-/**
- * SLIP netif initialization
- *
- * Call the arch specific sio_open and remember
- * the opened device in the state field of the netif.
- *
- * @param netif the lwip network interface structure for this slipif
- * @return ERR_OK if serial line could be opened,
- *         ERR_MEM if no memory could be allocated,
- *         ERR_IF is serial line couldn't be opened
- *
- * @note netif->num must contain the number of the serial port to open
- *       (0 by default)
- */
-err_t
-slipif_init(struct netif *netif)
-{
-  struct slipif_priv *priv;
-
-  LWIP_DEBUGF(SLIP_DEBUG, ("slipif_init: netif->num=%"U16_F"\n", (u16_t)netif->num));
-
-  /* Allocate private data */
-  priv = mem_malloc(sizeof(struct slipif_priv));
-  if (!priv) {
-    return ERR_MEM;
-  }
-
-  netif->name[0] = 's';
-  netif->name[1] = 'l';
-  netif->output = slipif_output;
-  netif->mtu = SLIP_MAX_SIZE;
-  netif->flags |= NETIF_FLAG_POINTTOPOINT;
-
-  /* Try to open the serial port (netif->num contains the port number). */
-  priv->sd = sio_open(netif->num);
-  if (!priv->sd) {
-    /* Opening the serial port failed. */
-    mem_free(priv);
-    return ERR_IF;
-  }
-
-  /* Initialize private data */
-  priv->p = NULL;
-  priv->q = NULL;
-  priv->state = SLIP_RECV_NORMAL;
-  priv->i = 0;
-  priv->recved = 0;
-
-  netif->state = priv;
-
-  /* initialize the snmp variables and counters inside the struct netif
-   * ifSpeed: no assumption can be made without knowing more about the
-   * serial line!
-   */
-  NETIF_INIT_SNMP(netif, snmp_ifType_slip, 0);
-
-  /* Create a thread to poll the serial line. */
-  sys_thread_new(SLIPIF_THREAD_NAME, slipif_loop_thread, netif,
-    SLIPIF_THREAD_STACKSIZE, SLIPIF_THREAD_PRIO);
-  return ERR_OK;
-}
-
-/**
- * Polls the serial device and feeds the IP layer with incoming packets.
- *
- * @param netif The lwip network interface structure for this slipif
- */
-void
-slipif_poll(struct netif *netif)
-{
-  struct pbuf *p;
-  struct slipif_priv *priv;
-
-  LWIP_ASSERT("netif != NULL", (netif != NULL));
-  LWIP_ASSERT("netif->state != NULL", (netif->state != NULL));
-
-  priv = netif->state;
-
-  while ((p = slipif_input(netif, SLIP_DONTBLOCK)) != NULL) {
-    if (netif->input(p, netif) != ERR_OK) {
-      pbuf_free(p);
-    }
-  }
-}
-
-#endif /* LWIP_HAVE_SLIPIF */