Diff: lwip/core/raw.c

Revision:

12:8dc6b255af6c

Parent:

11:da4498f591ee

diff -r da4498f591ee -r 8dc6b255af6c lwip/core/raw.c
--- a/lwip/core/raw.c	Thu Aug 05 15:01:33 2010 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,352 +0,0 @@
-/**
- * @file
- * Implementation of raw protocol PCBs for low-level handling of
- * different types of protocols besides (or overriding) those
- * already available in lwIP.
- *
- */
-
-/*
- * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * This file is part of the lwIP TCP/IP stack.
- *
- * Author: Adam Dunkels <adam@sics.se>
- *
- */
-
-#include "lwip/opt.h"
-
-#if LWIP_RAW /* don't build if not configured for use in lwipopts.h */
-
-#include "lwip/def.h"
-#include "lwip/memp.h"
-#include "lwip/ip_addr.h"
-#include "lwip/netif.h"
-#include "lwip/raw.h"
-#include "lwip/stats.h"
-#include "arch/perf.h"
-
-#include <string.h>
-
-/** The list of RAW PCBs */
-static struct raw_pcb *raw_pcbs;
-
-/**
- * Determine if in incoming IP packet is covered by a RAW PCB
- * and if so, pass it to a user-provided receive callback function.
- *
- * Given an incoming IP datagram (as a chain of pbufs) this function
- * finds a corresponding RAW PCB and calls the corresponding receive
- * callback function.
- *
- * @param p pbuf to be demultiplexed to a RAW PCB.
- * @param inp network interface on which the datagram was received.
- * @return - 1 if the packet has been eaten by a RAW PCB receive
- *           callback function. The caller MAY NOT not reference the
- *           packet any longer, and MAY NOT call pbuf_free().
- * @return - 0 if packet is not eaten (pbuf is still referenced by the
- *           caller).
- *
- */
-u8_t
-raw_input(struct pbuf *p, struct netif *inp)
-{
-  struct raw_pcb *pcb, *prev;
-  struct ip_hdr *iphdr;
-  s16_t proto;
-  u8_t eaten = 0;
-
-  LWIP_UNUSED_ARG(inp);
-
-  iphdr = (struct ip_hdr *)p->payload;
-  proto = IPH_PROTO(iphdr);
-
-  prev = NULL;
-  pcb = raw_pcbs;
-  /* loop through all raw pcbs until the packet is eaten by one */
-  /* this allows multiple pcbs to match against the packet by design */
-  while ((eaten == 0) && (pcb != NULL)) {
-    if ((pcb->protocol == proto) &&
-        (ip_addr_isany(&pcb->local_ip) ||
-         ip_addr_cmp(&(pcb->local_ip), &current_iphdr_dest))) {
-#if IP_SOF_BROADCAST_RECV
-      /* broadcast filter? */
-      if ((pcb->so_options & SOF_BROADCAST) || !ip_addr_isbroadcast(&current_iphdr_dest, inp))
-#endif /* IP_SOF_BROADCAST_RECV */
-      {
-        /* receive callback function available? */
-        if (pcb->recv != NULL) {
-          /* the receive callback function did not eat the packet? */
-          if (pcb->recv(pcb->recv_arg, pcb, p, ip_current_src_addr()) != 0) {
-            /* receive function ate the packet */
-            p = NULL;
-            eaten = 1;
-            if (prev != NULL) {
-            /* move the pcb to the front of raw_pcbs so that is
-               found faster next time */
-              prev->next = pcb->next;
-              pcb->next = raw_pcbs;
-              raw_pcbs = pcb;
-            }
-          }
-        }
-        /* no receive callback function was set for this raw PCB */
-      }
-      /* drop the packet */
-    }
-    prev = pcb;
-    pcb = pcb->next;
-  }
-  return eaten;
-}
-
-/**
- * Bind a RAW PCB.
- *
- * @param pcb RAW PCB to be bound with a local address ipaddr.
- * @param ipaddr local IP address to bind with. Use IP_ADDR_ANY to
- * bind to all local interfaces.
- *
- * @return lwIP error code.
- * - ERR_OK. Successful. No error occured.
- * - ERR_USE. The specified IP address is already bound to by
- * another RAW PCB.
- *
- * @see raw_disconnect()
- */
-err_t
-raw_bind(struct raw_pcb *pcb, ip_addr_t *ipaddr)
-{
-  ip_addr_set(&pcb->local_ip, ipaddr);
-  return ERR_OK;
-}
-
-/**
- * Connect an RAW PCB. This function is required by upper layers
- * of lwip. Using the raw api you could use raw_sendto() instead
- *
- * This will associate the RAW PCB with the remote address.
- *
- * @param pcb RAW PCB to be connected with remote address ipaddr and port.
- * @param ipaddr remote IP address to connect with.
- *
- * @return lwIP error code
- *
- * @see raw_disconnect() and raw_sendto()
- */
-err_t
-raw_connect(struct raw_pcb *pcb, ip_addr_t *ipaddr)
-{
-  ip_addr_set(&pcb->remote_ip, ipaddr);
-  return ERR_OK;
-}
-
-
-/**
- * Set the callback function for received packets that match the
- * raw PCB's protocol and binding. 
- * 
- * The callback function MUST either
- * - eat the packet by calling pbuf_free() and returning non-zero. The
- *   packet will not be passed to other raw PCBs or other protocol layers.
- * - not free the packet, and return zero. The packet will be matched
- *   against further PCBs and/or forwarded to another protocol layers.
- * 
- * @return non-zero if the packet was free()d, zero if the packet remains
- * available for others.
- */
-void
-raw_recv(struct raw_pcb *pcb, raw_recv_fn recv, void *recv_arg)
-{
-  /* remember recv() callback and user data */
-  pcb->recv = recv;
-  pcb->recv_arg = recv_arg;
-}
-
-/**
- * Send the raw IP packet to the given address. Note that actually you cannot
- * modify the IP headers (this is inconsistent with the receive callback where
- * you actually get the IP headers), you can only specify the IP payload here.
- * It requires some more changes in lwIP. (there will be a raw_send() function
- * then.)
- *
- * @param pcb the raw pcb which to send
- * @param p the IP payload to send
- * @param ipaddr the destination address of the IP packet
- *
- */
-err_t
-raw_sendto(struct raw_pcb *pcb, struct pbuf *p, ip_addr_t *ipaddr)
-{
-  err_t err;
-  struct netif *netif;
-  ip_addr_t *src_ip;
-  struct pbuf *q; /* q will be sent down the stack */
-  
-  LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_TRACE, ("raw_sendto\n"));
-  
-  /* not enough space to add an IP header to first pbuf in given p chain? */
-  if (pbuf_header(p, IP_HLEN)) {
-    /* allocate header in new pbuf */
-    q = pbuf_alloc(PBUF_IP, 0, PBUF_RAM);
-    /* new header pbuf could not be allocated? */
-    if (q == NULL) {
-      LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_LEVEL_SERIOUS, ("raw_sendto: could not allocate header\n"));
-      return ERR_MEM;
-    }
-    /* chain header q in front of given pbuf p */
-    pbuf_chain(q, p);
-    /* { first pbuf q points to header pbuf } */
-    LWIP_DEBUGF(RAW_DEBUG, ("raw_sendto: added header pbuf %p before given pbuf %p\n", (void *)q, (void *)p));
-  }  else {
-    /* first pbuf q equals given pbuf */
-    q = p;
-    if(pbuf_header(q, -IP_HLEN)) {
-      LWIP_ASSERT("Can't restore header we just removed!", 0);
-      return ERR_MEM;
-    }
-  }
-
-  if ((netif = ip_route(ipaddr)) == NULL) {
-    LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_LEVEL_WARNING, ("raw_sendto: No route to %"U16_F".%"U16_F".%"U16_F".%"U16_F"\n",
-      ip4_addr1_16(ipaddr), ip4_addr2_16(ipaddr), ip4_addr3_16(ipaddr), ip4_addr4_16(ipaddr)));
-    /* free any temporary header pbuf allocated by pbuf_header() */
-    if (q != p) {
-      pbuf_free(q);
-    }
-    return ERR_RTE;
-  }
-
-#if IP_SOF_BROADCAST
-  /* broadcast filter? */
-  if (((pcb->so_options & SOF_BROADCAST) == 0) && ip_addr_isbroadcast(ipaddr, netif)) {
-    LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_LEVEL_WARNING, ("raw_sendto: SOF_BROADCAST not enabled on pcb %p\n", (void *)pcb));
-    /* free any temporary header pbuf allocated by pbuf_header() */
-    if (q != p) {
-      pbuf_free(q);
-    }
-    return ERR_VAL;
-  }
-#endif /* IP_SOF_BROADCAST */
-
-  if (ip_addr_isany(&pcb->local_ip)) {
-    /* use outgoing network interface IP address as source address */
-    src_ip = &(netif->ip_addr);
-  } else {
-    /* use RAW PCB local IP address as source address */
-    src_ip = &(pcb->local_ip);
-  }
-
-#if LWIP_NETIF_HWADDRHINT
-  netif->addr_hint = &(pcb->addr_hint);
-#endif /* LWIP_NETIF_HWADDRHINT*/
-  err = ip_output_if (q, src_ip, ipaddr, pcb->ttl, pcb->tos, pcb->protocol, netif);
-#if LWIP_NETIF_HWADDRHINT
-  netif->addr_hint = NULL;
-#endif /* LWIP_NETIF_HWADDRHINT*/
-
-  /* did we chain a header earlier? */
-  if (q != p) {
-    /* free the header */
-    pbuf_free(q);
-  }
-  return err;
-}
-
-/**
- * Send the raw IP packet to the address given by raw_connect()
- *
- * @param pcb the raw pcb which to send
- * @param p the IP payload to send
- *
- */
-err_t
-raw_send(struct raw_pcb *pcb, struct pbuf *p)
-{
-  return raw_sendto(pcb, p, &pcb->remote_ip);
-}
-
-/**
- * Remove an RAW PCB.
- *
- * @param pcb RAW PCB to be removed. The PCB is removed from the list of
- * RAW PCB's and the data structure is freed from memory.
- *
- * @see raw_new()
- */
-void
-raw_remove(struct raw_pcb *pcb)
-{
-  struct raw_pcb *pcb2;
-  /* pcb to be removed is first in list? */
-  if (raw_pcbs == pcb) {
-    /* make list start at 2nd pcb */
-    raw_pcbs = raw_pcbs->next;
-    /* pcb not 1st in list */
-  } else {
-    for(pcb2 = raw_pcbs; pcb2 != NULL; pcb2 = pcb2->next) {
-      /* find pcb in raw_pcbs list */
-      if (pcb2->next != NULL && pcb2->next == pcb) {
-        /* remove pcb from list */
-        pcb2->next = pcb->next;
-      }
-    }
-  }
-  memp_free(MEMP_RAW_PCB, pcb);
-}
-
-/**
- * Create a RAW PCB.
- *
- * @return The RAW PCB which was created. NULL if the PCB data structure
- * could not be allocated.
- *
- * @param proto the protocol number of the IPs payload (e.g. IP_PROTO_ICMP)
- *
- * @see raw_remove()
- */
-struct raw_pcb *
-raw_new(u8_t proto)
-{
-  struct raw_pcb *pcb;
-
-  LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_TRACE, ("raw_new\n"));
-
-  pcb = (struct raw_pcb *)memp_malloc(MEMP_RAW_PCB);
-  /* could allocate RAW PCB? */
-  if (pcb != NULL) {
-    /* initialize PCB to all zeroes */
-    memset(pcb, 0, sizeof(struct raw_pcb));
-    pcb->protocol = proto;
-    pcb->ttl = RAW_TTL;
-    pcb->next = raw_pcbs;
-    raw_pcbs = pcb;
-  }
-  return pcb;
-}
-
-#endif /* LWIP_RAW */