Austin Dong / Mbed 2 deprecated HUZZAH-ESP8266-configuration-LPC1768

Setup and test the Adafruit HUZZAH ESP8266 Wi Fi SOC. Sets SSID and PASSWORD and prints status messages. For use on mbed LPC1768. See https://developer.mbed.org/users/ausdong/notebook/using-the-adafruit-huzzah-esp8266-to-add-wi-fi-to-/

Dependencies:   mbed

Fork of ESP8266-configuration-mbed-LPC1768 by jim hamblen

Diff: main.cpp

Revision:
2:c5515c7eba46
Parent:
1:4a9cc6d8c33d
Child:
3:14e33fec26c3
--- a/main.cpp	Tue Feb 10 16:35:26 2015 +0000
+++ b/main.cpp	Tue Feb 10 16:59:16 2015 +0000
@@ -9,16 +9,16 @@
 char buf[1024];
 char snd[255];
 
-char ssid[32] = "ssid";    // enter router ssid inside the quotes
-char pwd [32] = "password";    // enter router password inside the quotes
+char ssid[32] = "ssid";     // enter router ssid inside the quotes
+char pwd [32] = "password"; // enter router password inside the quotes
 
 void SendCMD(),getreply(),ESPconfig(),ESPsetbaudrate();
 
 
 int main() {
     
-    pc.baud(115200);    // set what you want here depending on your terminal program speed
-    esp.baud(115200);   // change this to the new ESP8266 baudrate if it is changed at any time.    
+    pc.baud(115200);  // set what you want here depending on your terminal program speed
+    esp.baud(9600);   // change this to the new ESP8266 baudrate if it is changed at any time.    
     
     //ESPsetbaudrate();   //******************  include this routine to set a different ESP8266 baudrate  ******************
 
@@ -46,18 +46,17 @@
     getreply();
     pc.printf(buf);
     
-    wait(1);
-   
+    wait(1);   
    
     pc.printf("\n---------- Get Version ----------\r\n");
     strcpy(snd,"AT+GMR\r\n");
     SendCMD();
     timeout=1;
     getreply();
-    pc.printf(buf);
+    pc.printf(buf);    
     
-    
-    wait(1);    
+    wait(1);
+        
     // set CWMODE to 1=Station,2=AP,3=BOTH, default mode 1 (Station)
     pc.printf("\n---------- Setting Mode ----------\r\n");
     strcpy(snd, "AT+CWMODE=1\r\n");
@@ -68,6 +67,16 @@
     
     wait(1);
     
+    // set CIPMUX to 0=Single,1=Multi 
+    pc.printf("\n---------- Setting Connection Mode ----------\r\n");
+    strcpy(snd, "AT+CIPMUX=1\r\n"); 
+    SendCMD();
+    timeout=1;
+    getreply();
+    pc.printf(buf);
+    
+    wait(1);
+    
     pc.printf("\n---------- Listing Acces Points ----------\r\n");
     strcpy(snd, "AT+CWLAP\r\n");
     SendCMD();