Diff: main.cpp

Revision:

74:847e5dc7b4d5

Parent:

73:d47320bcc568

Child:

75:f93c0063755c

--- a/main.cpp	Wed Aug 08 07:40:47 2018 +0000
+++ b/main.cpp	Wed Aug 08 09:41:37 2018 +0000
@@ -13,13 +13,13 @@
 #define D19 (PB_3)
 
 // on-board resources
+
 Serial pc(USBTX, USBRX, 115200);
 DigitalOut GrovePower(PB_10, 1);
 
-#define WS2812_BUF 150
-#define NUM_COLORS 6
-#define NUM_LEDS_PER_COLOR 10
-
+#define WS2812_BUF 8
+#define NUM_COLORS 8
+#define NUM_LEDS_PER_COLOR 8
 #define H0 8
 #define L0 32
 #define H1 17
@@ -27,26 +27,24 @@
  
 DigitalOut LEDPower(PE_8, 1);
 PixelArray px(WS2812_BUF);
-WS2812 ws(PB_1, 1, H0, L0, H1, L1);
-#if 0
+WS2812 ws(PB_1, WS2812_BUF, H0, L0, H1, L1);
+
 // Grove sensors
+
 DigitalOut led1(D38);
 AnalogIn ain(A6); // angle or light sensor
 InterruptIn btn(D20); // button or touch sensor
 Grove_LCD_RGB_Backlight lcd(I2C_SDA, I2C_SCL);
 Grove_temperature temp(A4);
-#endif
+
 uint32_t button = 0;
 
-
 void push()
 {
     button++;
 }
 
-#if 0
 
-// main() runs in its own thread in the OS
 int main()
 {
     char buf[20];
@@ -58,15 +56,24 @@
     lcd.print("Hello World!");
     lcd.locate(0, 1);
 
-#if 0
+    // set up the colours we want to draw with
+    const int colorbuf[NUM_COLORS] = {0x000000, 0x2f0000,0x2f2f00,0x002f00,0x002f2f,0x00002f,0x2f002f, 0x2f2f2f};
+ 
     ws.useII(WS2812::PER_PIXEL); // use per-pixel intensity scaling
-    int array[4] = (0xff, 0, 0, 0);
-    ws.write(array);
-#endif
+
+    // for each of the colours (j) write out 10 of them
+    // the pixels are written at the colour*10, plus the colour position
+    // all modulus 60 so it wraps around
+    for (int i = 0; i < WS2812_BUF; i++) {
+        px.Set(i, colorbuf[i]);
+        px.SetI(i, 0x80);
+    }
+ 
+    pc.printf("hello, Mbed world\n");
 
     int cnt = 0;
-    pc.printf("hello, Mbed world\n");
-    
+    int color = 0;
+
     while (true) {
         pc.printf("count = %4d, button = %d, analog = %2.2f, temp = %2.2f\n", cnt++, button, ain.read(), temp.getTemperature());
         sprintf(buf, "L=%2.2f, T=%2.2f", ain.read(), temp.getTemperature());
@@ -74,45 +81,13 @@
         lcd.locate(0, 1);
         lcd.print(buf);
         led1 = !led1;
+
+        ws.write_offsets(px.getBuf(), color, color, color);
+        color++;
+        if (color >= WS2812_BUF) {
+            color = 0;
+        }
+
         wait(0.5);
     }
 }
-
-#else
-int main()
-{
-    pc.printf("NeoPixel test.\n");
-    pc.printf("%2d, %2d, %2d, %2d\n", H0, L0, H1, L1);
- 
-    ws.useII(WS2812::PER_PIXEL); // use per-pixel intensity scaling
-    
-    // set up the colours we want to draw with
-    int colorbuf[NUM_COLORS] = {0x2f0000,0x2f2f00,0x002f00,0x002f2f,0x00002f,0x2f002f};
- 
-    // for each of the colours (j) write out 10 of them
-    // the pixels are written at the colour*10, plus the colour position
-    // all modulus 60 so it wraps around
-    for (int i = 0; i < WS2812_BUF; i++) {
-        px.Set(i, colorbuf[(i / NUM_LEDS_PER_COLOR) % NUM_COLORS]);
-    }
- 
-    // now all the colours are computed, add a fade effect using intensity scaling
-    // compute and write the II value for each pixel
-    for (int j=0; j<WS2812_BUF; j++) {
-        // px.SetI(pixel position, II value)
-        px.SetI(j%WS2812_BUF, 0xf+(0xf*(j%NUM_LEDS_PER_COLOR)));
-    }
- 
- 
-    // Now the buffer is written, rotate it
-    // by writing it out with an increasing offset
-    while (1) {
-        for (int z=WS2812_BUF; z >= 0 ; z--) {
-            ws.write_offsets(px.getBuf(),z,z,z);
-            wait(0.075);
-        }
-    }
- 
-}
-#endif
-