Aravind Vadali / mbed-src-RatRacerAV

Mbed Library with modified HSE_Startup timeout

Fork of mbed-src by mbed official

targets/hal/TARGET_NXP/TARGET_LPC11UXX/sleep.c@636:a11c0372f0ba, 2015-09-30 (annotated)

Committer:
mbed_official
Date:
Wed Sep 30 17:00:09 2015 +0100
Revision:
636:a11c0372f0ba
Parent:
75:99bf659e4489 
Synchronized with git revision d29c98dae61be0946ddf3a3c641c7726056f9452



Full URL: https://github.com/mbedmicro/mbed/commit/d29c98dae61be0946ddf3a3c641c7726056f9452/



Added support for SAMW25

Who changed what in which revision?

UserRevisionLine numberNew contents of line
emilmont 10:3bc89ef62ce7 1 /* mbed Microcontroller Library
emilmont 10:3bc89ef62ce7 2 * Copyright (c) 2006-2013 ARM Limited
emilmont 10:3bc89ef62ce7 3 *
emilmont 10:3bc89ef62ce7 4 * Licensed under the Apache License, Version 2.0 (the "License");
emilmont 10:3bc89ef62ce7 5 * you may not use this file except in compliance with the License.
emilmont 10:3bc89ef62ce7 6 * You may obtain a copy of the License at
emilmont 10:3bc89ef62ce7 7 *
emilmont 10:3bc89ef62ce7 8 * http://www.apache.org/licenses/LICENSE-2.0
emilmont 10:3bc89ef62ce7 9 *
emilmont 10:3bc89ef62ce7 10 * Unless required by applicable law or agreed to in writing, software
emilmont 10:3bc89ef62ce7 11 * distributed under the License is distributed on an "AS IS" BASIS,
emilmont 10:3bc89ef62ce7 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
emilmont 10:3bc89ef62ce7 13 * See the License for the specific language governing permissions and
emilmont 10:3bc89ef62ce7 14 * limitations under the License.
emilmont 10:3bc89ef62ce7 15 */
emilmont 10:3bc89ef62ce7 16 #include "sleep_api.h"
emilmont 10:3bc89ef62ce7 17 #include "cmsis.h"
emilmont 10:3bc89ef62ce7 18 #include "mbed_interface.h"
emilmont 10:3bc89ef62ce7 19
emilmont 10:3bc89ef62ce7 20 void sleep(void) {
emilmont 10:3bc89ef62ce7 21 // ensure debug is disconnected
mbed_official 75:99bf659e4489 22 #if DEVICE_SEMIHOST
emilmont 10:3bc89ef62ce7 23 mbed_interface_disconnect();
mbed_official 75:99bf659e4489 24 #endif
emilmont 10:3bc89ef62ce7 25
emilmont 10:3bc89ef62ce7 26 // PCON[PD] set to sleep
emilmont 10:3bc89ef62ce7 27 LPC_PMU->PCON = 0x0;
emilmont 10:3bc89ef62ce7 28
emilmont 10:3bc89ef62ce7 29 // SRC[SLEEPDEEP] set to 0 = sleep
emilmont 10:3bc89ef62ce7 30 SCB->SCR &= ~SCB_SCR_SLEEPDEEP_Msk;
emilmont 10:3bc89ef62ce7 31
emilmont 10:3bc89ef62ce7 32 // wait for interrupt
emilmont 10:3bc89ef62ce7 33 __WFI();
emilmont 10:3bc89ef62ce7 34 }
emilmont 10:3bc89ef62ce7 35
emilmont 10:3bc89ef62ce7 36 /*
emilmont 10:3bc89ef62ce7 37 * The mbed lpc1768 does not support the deepsleep mode
emilmont 10:3bc89ef62ce7 38 * as a debugger is connected to it (the mbed interface).
emilmont 10:3bc89ef62ce7 39 *
emilmont 10:3bc89ef62ce7 40 * As mentionned in an application note from NXP:
emilmont 10:3bc89ef62ce7 41 *
emilmont 10:3bc89ef62ce7 42 * http://www.po-star.com/public/uploads/20120319123122_141.pdf
emilmont 10:3bc89ef62ce7 43 *
emilmont 10:3bc89ef62ce7 44 * {{{
emilmont 10:3bc89ef62ce7 45 * The user should be aware of certain limitations during debugging.
emilmont 10:3bc89ef62ce7 46 * The most important is that, due to limitations of the Cortex-M3
emilmont 10:3bc89ef62ce7 47 * integration, the LPC17xx cannot wake up in the usual manner from
emilmont 10:3bc89ef62ce7 48 * Deep Sleep and Power-down modes. It is recommended not to use these
emilmont 10:3bc89ef62ce7 49 * modes during debug. Once an application is downloaded via JTAG/SWD
emilmont 10:3bc89ef62ce7 50 * interface, the USB to SWD/JTAG debug adapter (Keil ULINK2 for example)
emilmont 10:3bc89ef62ce7 51 * should be removed from the target board, and thereafter, power cycle
emilmont 10:3bc89ef62ce7 52 * the LPC17xx to allow wake-up from deep sleep and power-down modes
emilmont 10:3bc89ef62ce7 53 * }}}
emilmont 10:3bc89ef62ce7 54 *
emilmont 10:3bc89ef62ce7 55 * As the interface firmware does not reset the target when a
emilmont 10:3bc89ef62ce7 56 * mbed_interface_disconnect() semihosting call is made, the
emilmont 10:3bc89ef62ce7 57 * core cannot wake-up from deepsleep.
emilmont 10:3bc89ef62ce7 58 *
emilmont 10:3bc89ef62ce7 59 * We treat a deepsleep() as a normal sleep().
emilmont 10:3bc89ef62ce7 60 */
emilmont 10:3bc89ef62ce7 61
emilmont 10:3bc89ef62ce7 62 void deepsleep(void) {
emilmont 10:3bc89ef62ce7 63 // ensure debug is disconnected
mbed_official 75:99bf659e4489 64 #if DEVICE_SEMIHOST
emilmont 10:3bc89ef62ce7 65 mbed_interface_disconnect();
mbed_official 75:99bf659e4489 66 #endif
emilmont 10:3bc89ef62ce7 67
emilmont 10:3bc89ef62ce7 68 // PCON[PD] set to deepsleep
emilmont 10:3bc89ef62ce7 69 LPC_PMU->PCON = 0x1;
emilmont 10:3bc89ef62ce7 70
emilmont 10:3bc89ef62ce7 71 // SRC[SLEEPDEEP] set to 1 = deep sleep
emilmont 10:3bc89ef62ce7 72 SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
emilmont 10:3bc89ef62ce7 73
emilmont 10:3bc89ef62ce7 74 // Power up everything after powerdown
emilmont 10:3bc89ef62ce7 75 LPC_SYSCON->PDAWAKECFG &= 0xFFFFF800;
emilmont 10:3bc89ef62ce7 76
emilmont 10:3bc89ef62ce7 77 // wait for interrupt
emilmont 10:3bc89ef62ce7 78 __WFI();
emilmont 10:3bc89ef62ce7 79 }