Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Dependents: DISCO_IOT-wifi_client
Fork of stm-spirit1-rf-driver by
Revision 44:aedd63cb0ce3, committed 2016-12-16
- Comitter:
- Wolfgang Betz
- Date:
- Fri Dec 16 13:46:02 2016 +0100
- Parent:
- 43:a512f909514a
- Child:
- 45:2d01cc9bc761
- Commit message:
- Set 'MAX_PACKET_LEN' to 128
Changed in this revision
--- a/source/SimpleSpirit1.cpp Fri Dec 16 12:06:21 2016 +0100
+++ b/source/SimpleSpirit1.cpp Fri Dec 16 13:46:02 2016 +0100
@@ -138,8 +138,6 @@
};
spirit_gpio_init(&x_gpio_init);
-// #ifdef RX_FIFO_THR_AO_CSMA_WA
- // betzw - TODO: enabling CSMA/CA seems to be incompatible with TX FIFO usage (to be investigated)
/* Setup CSMA/CA */
CsmaInit x_csma_init = {
S_ENABLE, // enable persistent mode
@@ -150,12 +148,9 @@
8 // BU prescaler
};
csma_ca_init(&x_csma_init);
-// #endif
-#ifdef RX_FIFO_THR_AO_CSMA_WA
+#ifdef RX_FIFO_THR_WA
linear_fifo_set_almost_full_thr_rx(SPIRIT_MAX_FIFO_LEN-(MAX_PACKET_LEN+1));
-#else
- linear_fifo_set_almost_full_thr_rx(20); // betzw: heuristic value
#endif
#ifdef USE_STANDBY_STATE
@@ -190,10 +185,7 @@
pkt_basic_set_payload_length(payload_len); // set desired payload len
-// #ifdef RX_FIFO_THR_AO_CSMA_WA
- // betzw - TODO: enabling CSMA/CA seems to be incompatible with TX FIFO usage (to be investigated)
csma_ca_state(S_ENABLE); // enable CSMA/CA
-// #endif
int i = 0;
int remaining = payload_len;
@@ -229,10 +221,7 @@
_spirit_tx_started = false; // in case of state timeout
-// #ifdef RX_FIFO_THR_AO_CSMA_WA
- // betzw - TODO: enabling CSMA/CA seems to be incompatible with TX FIFO usage (to be investigated)
csma_ca_state(S_DISABLE); // disable CSMA/CA
-// #endif
cmd_strobe(SPIRIT1_STROBE_RX); // Return to RX state
@@ -518,8 +507,8 @@
debug_if(!((*tmp) & IRQ_RX_DATA_READY_MASK), "\n\rAssert failed in: %s (%d)\n\r", __func__, __LINE__);
#endif
- if(!_is_receiving) { // spurious irq?!?
-#ifdef DEBUG_IRQ
+ if(!_is_receiving) { // spurious irq?!? (betzw: see comments on macro 'RX_FIFO_THR_WA'!)
+#ifdef HEAVY_DEBUG
debug("\n\r%s (%d): irq=%x\n\r", __func__, __LINE__, *tmp);
#endif
} else {
--- a/source/libs/Contiki_STM32_Library/spirit1-config.h Fri Dec 16 12:06:21 2016 +0100 +++ b/source/libs/Contiki_STM32_Library/spirit1-config.h Fri Dec 16 13:46:02 2016 +0100 @@ -42,14 +42,23 @@ #define SPIRIT_MAX_FIFO_LEN (96) // betzw - WAS: 600 /*---------------------------------------------------------------------------*/ -/* Define beyond macro when your network includes a platform - like the K64F from - * Freescale - which suffers from a not yet analyzed (HW) bug in delivering/receiving - * further interrupts by/from Spirit after having reached the RX FIFO threshold and - * elaborated the corresponding 'IRQ_RX_FIFO_ALMOST_FULL' interrupt. - * Furthermore, enable this macro if you want to use CSMA/CA. - * NOTE: this enables just a workaround!!! +/* Sometimes Spirit1 seems to NOT deliver (correctly) the 'IRQ_RX_DATA_READY' + * event. + * This can be avoided by reducing the maximum packet length to a value which + * is lower than the RX FIFO size. + * The mbed driver currently implements another workaround to this which allows + * stable packet delivery of packets with maximum length up to 128 bytes + * (which is the recommended 6LoWPAN payload length). + * Enable beyond macro if you want to use the version of the driver which avoids + * FIFO overflows by reducing packet length. + * + * NOTE: the non delivery of event 'IRQ_RX_DATA_READY' MUST still be + * investigated further deeply (both on HW & SW level)! + * Furthermore, the current limit of 128 bytes should also be overcome, + * which again requires a further analysis of the RX process, which + * currently seems to run into RX FIFO (most likely) overflow situations. */ -// #define RX_FIFO_THR_AO_CSMA_WA +// #define RX_FIFO_THR_WA /** * The MAX_PACKET_LEN is an arbitrary value used to define the two array @@ -57,10 +66,10 @@ * The SPIRIT1 supports with its packet handler a length of 65,535 bytes, * and in direct mode (without packet handler) there is no limit of data. */ -#ifdef RX_FIFO_THR_AO_CSMA_WA +#ifdef RX_FIFO_THR_WA #define MAX_PACKET_LEN (SPIRIT_MAX_FIFO_LEN-1) #else -#define MAX_PACKET_LEN (255) // betzw - WAS: SPIRIT_MAX_FIFO_LEN, but LEN_WIDTH is set to 7 so the variable payload length is theoretically from 0 to 255 bytes +#define MAX_PACKET_LEN (128) // betzw - WAS: SPIRIT_MAX_FIFO_LEN, but LEN_WIDTH is set to 7 so the variable payload length is theoretically from 0 to 255 bytes #endif /*---------------------------------------------------------------------------*/
