Doug Anson
patched lwip-eth with https://github.com/mbedmicro/mbed/commit/8222bde1af2e328e4c58d0f438827f3091e5e0eb
Fork of
lwip-eth
by 
mbed official
Diff: arch/lpc_phy_dp83848.c
- Revision:
- 3:dd8b8f5b449a
- Parent:
- 1:0c9d93e2f51c
- Child:
- 4:d827a085afd9
--- a/arch/lpc_phy_dp83848.c Fri Jun 22 11:57:39 2012 +0000
+++ b/arch/lpc_phy_dp83848.c Mon Jul 23 11:52:41 2012 +0000
@@ -1,287 +1,286 @@
-/**********************************************************************
-* $Id$ lpc_phy_dp83848.c 2011-11-20
-*//**
-* @file lpc_phy_dp83848.c
-* @brief DP83848C PHY status and control.
-* @version 1.0
-* @date 20 Nov. 2011
-* @author NXP MCU SW Application Team
-*
-* Copyright(C) 2011, NXP Semiconductor
-* All rights reserved.
-*
-***********************************************************************
-* Software that is described herein is for illustrative purposes only
-* which provides customers with programming information regarding the
-* products. This software is supplied "AS IS" without any warranties.
-* NXP Semiconductors assumes no responsibility or liability for the
-* use of the software, conveys no license or title under any patent,
-* copyright, or mask work right to the product. NXP Semiconductors
-* reserves the right to make changes in the software without
-* notification. NXP Semiconductors also make no representation or
-* warranty that such application will be suitable for the specified
-* use without further testing or modification.
-**********************************************************************/
-
-#include "lwip/opt.h"
-#include "lwip/err.h"
-#include "lwip/tcpip.h"
-#include "lwip/snmp.h"
-#include "lpc_emac_config.h"
-#include "lpc_phy.h"
-
-/** @defgroup dp83848_phy PHY status and control for the DP83848.
- * @ingroup lwip_phy
- *
- * Various functions for controlling and monitoring the status of the
- * DP83848 PHY. In polled (standalone) systems, the PHY state must be
- * monitored as part of the application. In a threaded (RTOS) system,
- * the PHY state is monitored by the PHY handler thread. The MAC
- * driver will not transmit unless the PHY link is active.
- * @{
- */
-
-/** \brief DP83848 PHY register offsets */
-#define DP8_BMCR_REG 0x0 /**< Basic Mode Control Register */
-#define DP8_BMSR_REG 0x1 /**< Basic Mode Status Reg */
-#define DP8_ANADV_REG 0x4 /**< Auto_Neg Advt Reg */
-#define DP8_ANLPA_REG 0x5 /**< Auto_neg Link Partner Ability Reg */
-#define DP8_ANEEXP_REG 0x6 /**< Auto-neg Expansion Reg */
-#define DP8_PHY_STAT_REG 0x10 /**< PHY Status Register */
-#define DP8_PHY_INT_CTL_REG 0x11 /**< PHY Interrupt Control Register */
-#define DP8_PHY_RBR_REG 0x17 /**< PHY RMII and Bypass Register */
-#define DP8_PHY_STS_REG 0x19 /**< PHY Status Register */
-
-/** \brief DP83848 Control register definitions */
-#define DP8_RESET (1 << 15) /**< 1= S/W Reset */
-#define DP8_LOOPBACK (1 << 14) /**< 1=loopback Enabled */
-#define DP8_SPEED_SELECT (1 << 13) /**< 1=Select 100MBps */
-#define DP8_AUTONEG (1 << 12) /**< 1=Enable auto-negotiation */
-#define DP8_POWER_DOWN (1 << 11) /**< 1=Power down PHY */
-#define DP8_ISOLATE (1 << 10) /**< 1=Isolate PHY */
-#define DP8_RESTART_AUTONEG (1 << 9) /**< 1=Restart auto-negoatiation */
-#define DP8_DUPLEX_MODE (1 << 8) /**< 1=Full duplex mode */
-#define DP8_COLLISION_TEST (1 << 7) /**< 1=Perform collsion test */
-
-/** \brief DP83848 Status register definitions */
-#define DP8_100BASE_T4 (1 << 15) /**< T4 mode */
-#define DP8_100BASE_TX_FD (1 << 14) /**< 100MBps full duplex */
-#define DP8_100BASE_TX_HD (1 << 13) /**< 100MBps half duplex */
-#define DP8_10BASE_T_FD (1 << 12) /**< 100Bps full duplex */
-#define DP8_10BASE_T_HD (1 << 11) /**< 10MBps half duplex */
-#define DP8_MF_PREAMB_SUPPR (1 << 6) /**< Preamble suppress */
-#define DP8_AUTONEG_COMP (1 << 5) /**< Auto-negotation complete */
-#define DP8_RMT_FAULT (1 << 4) /**< Fault */
-#define DP8_AUTONEG_ABILITY (1 << 3) /**< Auto-negotation supported */
-#define DP8_LINK_STATUS (1 << 2) /**< 1=Link active */
-#define DP8_JABBER_DETECT (1 << 1) /**< Jabber detect */
-#define DP8_EXTEND_CAPAB (1 << 0) /**< Supports extended capabilities */
-
-/** \brief DP83848 PHY RBR MII dode definitions */
-#define DP8_RBR_RMII_MODE (1 << 5) /**< Use RMII mode */
-
-/** \brief DP83848 PHY status definitions */
-#define DP8_REMOTEFAULT (1 << 6) /**< Remote fault */
-#define DP8_FULLDUPLEX (1 << 2) /**< 1=full duplex */
-#define DP8_SPEED10MBPS (1 << 1) /**< 1=10MBps speed */
-#define DP8_VALID_LINK (1 << 0) /**< 1=Link active */
-
-/** \brief DP83848 PHY ID register definitions */
-#define DP8_PHYID1_OUI 0x2000 /**< Expected PHY ID1 */
-#define DP8_PHYID2_OUI 0x5c90 /**< Expected PHY ID2 */
-
-/** \brief PHY status structure used to indicate current status of PHY.
- */
-typedef struct {
- u32_t phy_speed_100mbs:1; /**< 10/100 MBS connection speed flag. */
- u32_t phy_full_duplex:1; /**< Half/full duplex connection speed flag. */
- u32_t phy_link_active:1; /**< Phy link active flag. */
-} PHY_STATUS_TYPE;
-
-/** \brief PHY update flags */
-static PHY_STATUS_TYPE physts;
-
-/** \brief Last PHY update flags, used for determing if something has changed */
-static PHY_STATUS_TYPE olddphysts;
-
-/** \brief PHY update counter for state machine */
-static s32_t phyustate;
-
-/** \brief Update PHY status from passed value
- *
- * This function updates the current PHY status based on the
- * passed PHY status word. The PHY status indicate if the link
- * is active, the connection speed, and duplex.
- *
- * \param[in] netif NETIF structure
- * \param[in] linksts Status word from PHY
- * \return 1 if the status has changed, otherwise 0
- */
-static s32_t lpc_update_phy_sts(struct netif *netif, u32_t linksts)
-{
- s32_t changed = 0;
-
- /* Update link active status */
- if (linksts & DP8_VALID_LINK)
- physts.phy_link_active = 1;
- else
- physts.phy_link_active = 0;
-
- /* Full or half duplex */
- if (linksts & DP8_FULLDUPLEX)
- physts.phy_full_duplex = 1;
- else
- physts.phy_full_duplex = 0;
-
- /* Configure 100MBit/10MBit mode. */
- if (linksts & DP8_SPEED10MBPS)
- physts.phy_speed_100mbs = 0;
- else
- physts.phy_speed_100mbs = 1;
-
- if (physts.phy_speed_100mbs != olddphysts.phy_speed_100mbs) {
- changed = 1;
- if (physts.phy_speed_100mbs) {
- /* 100MBit mode. */
- lpc_emac_set_speed(1);
-
- NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 100000000);
- }
- else {
- /* 10MBit mode. */
- lpc_emac_set_speed(0);
-
- NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 10000000);
- }
-
- olddphysts.phy_speed_100mbs = physts.phy_speed_100mbs;
- }
-
- if (physts.phy_full_duplex != olddphysts.phy_full_duplex) {
- changed = 1;
- if (physts.phy_full_duplex)
- lpc_emac_set_duplex(1);
- else
- lpc_emac_set_duplex(0);
-
- olddphysts.phy_full_duplex = physts.phy_full_duplex;
- }
-
- if (physts.phy_link_active != olddphysts.phy_link_active) {
- changed = 1;
-#if NO_SYS == 1
- if (physts.phy_link_active)
- netif_set_link_up(netif);
- else
- netif_set_link_down(netif);
-#else
- if (physts.phy_link_active)
- tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_up,
- (void*) netif, 1);
- else
- tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_down,
- (void*) netif, 1);
-#endif
-
- olddphysts.phy_link_active = physts.phy_link_active;
- }
-
- return changed;
-}
-
-/** \brief Initialize the DP83848 PHY.
- *
- * This function initializes the DP83848 PHY. It will block until
- * complete. This function is called as part of the EMAC driver
- * initialization. Configuration of the PHY at startup is
- * controlled by setting up configuration defines in lpc_phy.h.
- *
- * \param[in] netif NETIF structure
- * \param[in] rmii If set, configures the PHY for RMII mode
- * \return ERR_OK if the setup was successful, otherwise ERR_TIMEOUT
- */
-err_t lpc_phy_init(struct netif *netif, int rmii)
-{
- u32_t tmp;
- s32_t i;
-
- physts.phy_speed_100mbs = olddphysts.phy_speed_100mbs = 2;
- physts.phy_full_duplex = olddphysts.phy_full_duplex = 2;
- physts.phy_link_active = olddphysts.phy_link_active = 2;
- phyustate = 0;
-
- /* Only first read and write are checked for failure */
- /* Put the DP83848C in reset mode and wait for completion */
- if (lpc_mii_write(DP8_BMCR_REG, DP8_RESET) != 0)
- return ERR_TIMEOUT;
- i = 400;
- while (i > 0) {
- osDelay(1); /* 1 ms */
- if (lpc_mii_read(DP8_BMCR_REG, &tmp) != 0)
- return ERR_TIMEOUT;
-
- if (!(tmp & (DP8_RESET | DP8_POWER_DOWN)))
- i = -1;
- else
- i--;
- }
- /* Timeout? */
- if (i == 0)
- return ERR_TIMEOUT;
-
- /* Setup link based on configuration options */
-#if PHY_USE_AUTONEG==1
- tmp = DP8_AUTONEG;
-#else
- tmp = 0;
-#endif
-#if PHY_USE_100MBS==1
- tmp |= DP8_SPEED_SELECT;
-#endif
-#if PHY_USE_FULL_DUPLEX==1
- tmp |= DP8_DUPLEX_MODE;
-#endif
-
- lpc_mii_write(DP8_BMCR_REG, tmp);
-
- /* Enable RMII mode for PHY */
- if (rmii)
- lpc_mii_write(DP8_PHY_RBR_REG, DP8_RBR_RMII_MODE);
-
- /* The link is not set active at this point, but will be detected
- later */
-
- return ERR_OK;
-}
-
-/* Phy status update state machine */
-s32_t lpc_phy_sts_sm(struct netif *netif)
-{
- s32_t changed = 0;
-
- switch (phyustate) {
- default:
- case 0:
- /* Read BMSR to clear faults */
- lpc_mii_read_noblock(DP8_PHY_STAT_REG);
- phyustate = 1;
- break;
-
- case 1:
- /* Wait for read status state */
- if (!lpc_mii_is_busy()) {
- /* Update PHY status */
- changed = lpc_update_phy_sts(netif, lpc_mii_read_data());
- phyustate = 0;
- }
- break;
- }
-
- return changed;
-}
-
-/**
- * @}
- */
-
-/* --------------------------------- End Of File ------------------------------ */
+/**********************************************************************
+* $Id$ lpc_phy_dp83848.c 2011-11-20
+*//**
+* @file lpc_phy_dp83848.c
+* @brief DP83848C PHY status and control.
+* @version 1.0
+* @date 20 Nov. 2011
+* @author NXP MCU SW Application Team
+*
+* Copyright(C) 2011, NXP Semiconductor
+* All rights reserved.
+*
+***********************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+**********************************************************************/
+
+#include "lwip/opt.h"
+#include "lwip/err.h"
+#include "lwip/tcpip.h"
+#include "lwip/snmp.h"
+#include "lpc_emac_config.h"
+#include "lpc_phy.h"
+
+/** @defgroup dp83848_phy PHY status and control for the DP83848.
+ * @ingroup lwip_phy
+ *
+ * Various functions for controlling and monitoring the status of the
+ * DP83848 PHY. In polled (standalone) systems, the PHY state must be
+ * monitored as part of the application. In a threaded (RTOS) system,
+ * the PHY state is monitored by the PHY handler thread. The MAC
+ * driver will not transmit unless the PHY link is active.
+ * @{
+ */
+
+/** \brief DP83848 PHY register offsets */
+#define DP8_BMCR_REG 0x0 /**< Basic Mode Control Register */
+#define DP8_BMSR_REG 0x1 /**< Basic Mode Status Reg */
+#define DP8_ANADV_REG 0x4 /**< Auto_Neg Advt Reg */
+#define DP8_ANLPA_REG 0x5 /**< Auto_neg Link Partner Ability Reg */
+#define DP8_ANEEXP_REG 0x6 /**< Auto-neg Expansion Reg */
+#define DP8_PHY_STAT_REG 0x10 /**< PHY Status Register */
+#define DP8_PHY_INT_CTL_REG 0x11 /**< PHY Interrupt Control Register */
+#define DP8_PHY_RBR_REG 0x17 /**< PHY RMII and Bypass Register */
+#define DP8_PHY_STS_REG 0x19 /**< PHY Status Register */
+
+/** \brief DP83848 Control register definitions */
+#define DP8_RESET (1 << 15) /**< 1= S/W Reset */
+#define DP8_LOOPBACK (1 << 14) /**< 1=loopback Enabled */
+#define DP8_SPEED_SELECT (1 << 13) /**< 1=Select 100MBps */
+#define DP8_AUTONEG (1 << 12) /**< 1=Enable auto-negotiation */
+#define DP8_POWER_DOWN (1 << 11) /**< 1=Power down PHY */
+#define DP8_ISOLATE (1 << 10) /**< 1=Isolate PHY */
+#define DP8_RESTART_AUTONEG (1 << 9) /**< 1=Restart auto-negoatiation */
+#define DP8_DUPLEX_MODE (1 << 8) /**< 1=Full duplex mode */
+#define DP8_COLLISION_TEST (1 << 7) /**< 1=Perform collsion test */
+
+/** \brief DP83848 Status register definitions */
+#define DP8_100BASE_T4 (1 << 15) /**< T4 mode */
+#define DP8_100BASE_TX_FD (1 << 14) /**< 100MBps full duplex */
+#define DP8_100BASE_TX_HD (1 << 13) /**< 100MBps half duplex */
+#define DP8_10BASE_T_FD (1 << 12) /**< 100Bps full duplex */
+#define DP8_10BASE_T_HD (1 << 11) /**< 10MBps half duplex */
+#define DP8_MF_PREAMB_SUPPR (1 << 6) /**< Preamble suppress */
+#define DP8_AUTONEG_COMP (1 << 5) /**< Auto-negotation complete */
+#define DP8_RMT_FAULT (1 << 4) /**< Fault */
+#define DP8_AUTONEG_ABILITY (1 << 3) /**< Auto-negotation supported */
+#define DP8_LINK_STATUS (1 << 2) /**< 1=Link active */
+#define DP8_JABBER_DETECT (1 << 1) /**< Jabber detect */
+#define DP8_EXTEND_CAPAB (1 << 0) /**< Supports extended capabilities */
+
+/** \brief DP83848 PHY RBR MII dode definitions */
+#define DP8_RBR_RMII_MODE (1 << 5) /**< Use RMII mode */
+
+/** \brief DP83848 PHY status definitions */
+#define DP8_REMOTEFAULT (1 << 6) /**< Remote fault */
+#define DP8_FULLDUPLEX (1 << 2) /**< 1=full duplex */
+#define DP8_SPEED10MBPS (1 << 1) /**< 1=10MBps speed */
+#define DP8_VALID_LINK (1 << 0) /**< 1=Link active */
+
+/** \brief DP83848 PHY ID register definitions */
+#define DP8_PHYID1_OUI 0x2000 /**< Expected PHY ID1 */
+#define DP8_PHYID2_OUI 0x5c90 /**< Expected PHY ID2 */
+
+/** \brief PHY status structure used to indicate current status of PHY.
+ */
+typedef struct {
+ u32_t phy_speed_100mbs:1; /**< 10/100 MBS connection speed flag. */
+ u32_t phy_full_duplex:1; /**< Half/full duplex connection speed flag. */
+ u32_t phy_link_active:1; /**< Phy link active flag. */
+} PHY_STATUS_TYPE;
+
+/** \brief PHY update flags */
+static PHY_STATUS_TYPE physts;
+
+/** \brief Last PHY update flags, used for determing if something has changed */
+static PHY_STATUS_TYPE olddphysts;
+
+/** \brief PHY update counter for state machine */
+static s32_t phyustate;
+
+/** \brief Update PHY status from passed value
+ *
+ * This function updates the current PHY status based on the
+ * passed PHY status word. The PHY status indicate if the link
+ * is active, the connection speed, and duplex.
+ *
+ * \param[in] netif NETIF structure
+ * \param[in] linksts Status word from PHY
+ * \return 1 if the status has changed, otherwise 0
+ */
+static s32_t lpc_update_phy_sts(struct netif *netif, u32_t linksts)
+{
+ s32_t changed = 0;
+
+ /* Update link active status */
+ if (linksts & DP8_VALID_LINK)
+ physts.phy_link_active = 1;
+ else
+ physts.phy_link_active = 0;
+
+ /* Full or half duplex */
+ if (linksts & DP8_FULLDUPLEX)
+ physts.phy_full_duplex = 1;
+ else
+ physts.phy_full_duplex = 0;
+
+ /* Configure 100MBit/10MBit mode. */
+ if (linksts & DP8_SPEED10MBPS)
+ physts.phy_speed_100mbs = 0;
+ else
+ physts.phy_speed_100mbs = 1;
+
+ if (physts.phy_speed_100mbs != olddphysts.phy_speed_100mbs) {
+ changed = 1;
+ if (physts.phy_speed_100mbs) {
+ /* 100MBit mode. */
+ lpc_emac_set_speed(1);
+
+ NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 100000000);
+ }
+ else {
+ /* 10MBit mode. */
+ lpc_emac_set_speed(0);
+
+ NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 10000000);
+ }
+
+ olddphysts.phy_speed_100mbs = physts.phy_speed_100mbs;
+ }
+
+ if (physts.phy_full_duplex != olddphysts.phy_full_duplex) {
+ changed = 1;
+ if (physts.phy_full_duplex)
+ lpc_emac_set_duplex(1);
+ else
+ lpc_emac_set_duplex(0);
+
+ olddphysts.phy_full_duplex = physts.phy_full_duplex;
+ }
+
+ if (physts.phy_link_active != olddphysts.phy_link_active) {
+ changed = 1;
+#if NO_SYS == 1
+ if (physts.phy_link_active)
+ netif_set_link_up(netif);
+ else
+ netif_set_link_down(netif);
+#else
+ if (physts.phy_link_active)
+ tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_up,
+ (void*) netif, 1);
+ else
+ tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_down,
+ (void*) netif, 1);
+#endif
+
+ olddphysts.phy_link_active = physts.phy_link_active;
+ }
+
+ return changed;
+}
+
+/** \brief Initialize the DP83848 PHY.
+ *
+ * This function initializes the DP83848 PHY. It will block until
+ * complete. This function is called as part of the EMAC driver
+ * initialization. Configuration of the PHY at startup is
+ * controlled by setting up configuration defines in lpc_phy.h.
+ *
+ * \param[in] netif NETIF structure
+ * \param[in] rmii If set, configures the PHY for RMII mode
+ * \return ERR_OK if the setup was successful, otherwise ERR_TIMEOUT
+ */
+err_t lpc_phy_init(struct netif *netif, int rmii)
+{
+ u32_t tmp;
+ s32_t i;
+
+ physts.phy_speed_100mbs = olddphysts.phy_speed_100mbs = 2;
+ physts.phy_full_duplex = olddphysts.phy_full_duplex = 2;
+ physts.phy_link_active = olddphysts.phy_link_active = 2;
+ phyustate = 0;
+
+ /* Only first read and write are checked for failure */
+ /* Put the DP83848C in reset mode and wait for completion */
+ if (lpc_mii_write(DP8_BMCR_REG, DP8_RESET) != 0)
+ return ERR_TIMEOUT;
+ i = 400;
+ while (i > 0) {
+ osDelay(1); /* 1 ms */
+ if (lpc_mii_read(DP8_BMCR_REG, &tmp) != 0)
+ return ERR_TIMEOUT;
+
+ if (!(tmp & (DP8_RESET | DP8_POWER_DOWN)))
+ i = -1;
+ else
+ i--;
+ }
+ /* Timeout? */
+ if (i == 0)
+ return ERR_TIMEOUT;
+
+ /* Setup link based on configuration options */
+#if PHY_USE_AUTONEG==1
+ tmp = DP8_AUTONEG;
+#else
+ tmp = 0;
+#endif
+#if PHY_USE_100MBS==1
+ tmp |= DP8_SPEED_SELECT;
+#endif
+#if PHY_USE_FULL_DUPLEX==1
+ tmp |= DP8_DUPLEX_MODE;
+#endif
+ lpc_mii_write(DP8_BMCR_REG, tmp);
+
+ /* Enable RMII mode for PHY */
+ if (rmii)
+ lpc_mii_write(DP8_PHY_RBR_REG, DP8_RBR_RMII_MODE);
+
+ /* The link is not set active at this point, but will be detected
+ later */
+
+ return ERR_OK;
+}
+
+/* Phy status update state machine */
+s32_t lpc_phy_sts_sm(struct netif *netif)
+{
+ s32_t changed = 0;
+
+ switch (phyustate) {
+ default:
+ case 0:
+ /* Read BMSR to clear faults */
+ lpc_mii_read_noblock(DP8_PHY_STAT_REG);
+ phyustate = 1;
+ break;
+
+ case 1:
+ /* Wait for read status state */
+ if (!lpc_mii_is_busy()) {
+ /* Update PHY status */
+ changed = lpc_update_phy_sts(netif, lpc_mii_read_data());
+ phyustate = 0;
+ }
+ break;
+ }
+
+ return changed;
+}
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */