Bluetooth enabled control of a BLDC via the Allegro MicroSystems A4960.

Dependencies:   BLE_API mbed nRF51822

Fork of BLE_LED by Bluetooth Low Energy

Revision:
11:4251b62991ac
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/spi_master.cpp	Tue May 16 19:31:49 2017 +0000
@@ -0,0 +1,236 @@
+/*
+
+Copyright (c) 2012-2014 RedBearLab
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software 
+and associated documentation files (the "Software"), to deal in the Software without restriction, 
+including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, 
+and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, 
+subject to the following conditions:
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, 
+INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR 
+PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE 
+FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+*/
+
+#include "spi_master.h"
+
+/**********************************************************************
+name :
+function : 
+**********************************************************************/
+SPIClass::SPIClass(NRF_SPI_Type *_spi) : spi(_spi)
+{
+    //do nothing
+}
+
+/**********************************************************************
+name :
+function : 
+**********************************************************************/
+void SPIClass::setCPOL( bool active_low)
+{
+    if(active_low)
+    {
+        spi->CONFIG |= (SPI_CONFIG_CPOL_ActiveLow << SPI_CONFIG_CPOL_Pos);
+    }
+    else
+    {
+        spi->CONFIG |= (SPI_CONFIG_CPOL_ActiveHigh << SPI_CONFIG_CPOL_Pos);
+    }
+}
+
+/**********************************************************************
+name :
+function : 
+**********************************************************************/
+void SPIClass::setCPHA( bool trailing)
+{
+    if(trailing)
+    {
+        spi->CONFIG |= (SPI_CONFIG_CPHA_Trailing << SPI_CONFIG_CPHA_Pos);
+    }
+    else
+    {
+        spi->CONFIG |= (SPI_CONFIG_CPHA_Leading << SPI_CONFIG_CPHA_Pos);
+    }
+
+}
+
+/**********************************************************************
+name :
+function : MSBFIRST, LSBFIRST
+**********************************************************************/
+void SPIClass::setBitORDER( BitOrder  bit)
+{
+    if(bit == MSBFIRST)
+    {
+        spi->CONFIG |= (SPI_CONFIG_ORDER_MsbFirst << SPI_CONFIG_ORDER_Pos);
+    }
+    else
+    {
+        spi->CONFIG |= (SPI_CONFIG_ORDER_LsbFirst << SPI_CONFIG_ORDER_Pos);
+    }
+}
+
+/**********************************************************************
+name :
+function : 
+**********************************************************************/
+void SPIClass::setFrequency(uint8_t speed)
+{
+    if (speed == 0)
+    {
+        spi->FREQUENCY = SPI_FREQUENCY_125K;
+    }
+    else if (speed == 1)
+    {
+        spi->FREQUENCY = SPI_FREQUENCY_250K;
+    }
+    else if (speed == 2)
+    {
+        spi->FREQUENCY = SPI_FREQUENCY_500K;
+    }
+    else if (speed == 3)
+    {
+        spi->FREQUENCY = SPI_FREQUENCY_1M;
+    }
+    else if (speed == 4)
+    {
+        spi->FREQUENCY = SPI_FREQUENCY_2M;
+    }
+    else if (speed == 5)
+    {
+        spi->FREQUENCY = SPI_FREQUENCY_4M;
+    }
+    else if (speed == 6)
+    {
+        spi->FREQUENCY = SPI_FREQUENCY_8M;
+    }
+    else
+    {
+        spi->FREQUENCY = SPI_FREQUENCY_4M;
+    }   
+}
+
+/**********************************************************************
+name :
+function : 
+**********************************************************************/
+void SPIClass::setSPIMode( uint8_t mode )
+{
+    if (SPI_MODE0 == mode)
+    {
+        setCPOL(0);
+        setCPHA(0);     
+    }
+    else if (mode == SPI_MODE1)
+    {
+        setCPOL(0);
+        setCPHA(1);
+    }
+    else if (mode == SPI_MODE2)
+    {
+        setCPOL(1);
+        setCPHA(0);
+    }
+    else if (mode == SPI_MODE3)
+    {
+        setCPOL(1);
+        setCPHA(1);
+    }
+    else
+    {
+        setCPOL(0);
+        setCPHA(0);         
+    }
+}
+
+/**********************************************************************
+name :
+function : 
+**********************************************************************/
+void SPIClass::begin(uint32_t sck, uint32_t mosi, uint32_t miso)
+{
+
+        SCK_Pin = sck;
+        MOSI_Pin = mosi;
+        MISO_Pin = miso;
+        
+        NRF_GPIO->PIN_CNF[SCK_Pin] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+                                        | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+                                        | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos)
+                                        | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+                                        | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);    
+                                        
+        NRF_GPIO->PIN_CNF[MOSI_Pin] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+                                        | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+                                        | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos)
+                                        | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+                                        | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
+                                        
+        NRF_GPIO->PIN_CNF[MISO_Pin] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+                                        | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+                                        | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos)
+                                        | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+                                        | (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);                                     
+        spi->PSELSCK  = SCK_Pin;
+        spi->PSELMOSI = MOSI_Pin;
+        spi->PSELMISO = MISO_Pin;       
+        
+        setFrequency(SPI_1M);
+        setSPIMode(SPI_MODE3);
+        setBitORDER(MSBFIRST);
+        
+        spi->EVENTS_READY = 0;
+        spi->ENABLE = (SPI_ENABLE_ENABLE_Enabled << SPI_ENABLE_ENABLE_Pos);
+    
+}
+
+/**********************************************************************
+name :
+function : 
+**********************************************************************/
+void SPIClass::begin()
+{
+    begin(SCK, MOSI, MISO);
+}
+
+/**********************************************************************
+name :
+function : 
+**********************************************************************/
+uint8_t SPIClass::transfer(uint8_t data)
+{
+    while( spi->EVENTS_READY != 0U );
+    
+    spi->TXD = (uint32_t)data;
+    
+    while(spi->EVENTS_READY == 0);
+    
+    data = (uint8_t)spi->RXD;
+    
+    spi->EVENTS_READY = 0;
+    
+    return data;
+}
+
+/**********************************************************************
+name :
+function : 
+**********************************************************************/
+void SPIClass::endTransfer()
+{
+    spi->ENABLE = (SPI_ENABLE_ENABLE_Disabled << SPI_ENABLE_ENABLE_Pos);
+}
+
+/**********************************************************************
+name :
+function : 
+**********************************************************************/
+
+//SPIClass SPI(NRF_SPI1);