Diff: main.cpp

Revision:

0:9ab53ff6cf89

Child:

1:0f3c4d6b818a

diff -r 000000000000 -r 9ab53ff6cf89 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue Sep 10 15:15:20 2013 +0000
@@ -0,0 +1,72 @@
+#include "mbed.h"
+#include "TSL2561.h"
+
+
+Serial PC(USBTX, USBRX);
+
+#define PC_PRINTX(z,x)             if(z==1) PC.printf(x);
+#define PC_PRINTLNX(z,x)           if(z==1) {PC.printf(x);        PC.printf("\r\n");}
+#define PC_PRINTXY(z,x, y)         if(z==1) PC.printf(x, y);
+#define PC_PRINTLNXY(z,x, y)       if(z==1) {PC.printf(x, y);     PC.printf("\r\n");}
+
+DigitalOut myled(LED1);
+TSL2561 tsl2561(TSL2561_ADDR_FLOAT);
+
+void setup(void){
+
+    if (tsl2561.begin()) {    
+        PC_PRINTLNX(1,"TSL2561 Sensor Found");        
+    } else {    
+        PC_PRINTLNX(1,"TSL2561 Sensor not Found");   
+    }
+    
+    // You can change the gain on the fly, to adapt to brighter/dimmer tsl2561 situations
+  tsl2561.setGain(TSL2561_GAIN_0X);         // set no gain (for bright situtations)
+  //tsl2561.setGain(TSL2561_GAIN_16X);      // set 16x gain (for dim situations)
+  
+  // Changing the integration time gives you a longer time over which to sense tsl2561
+  // longer timelines are slower, but are good in very low tsl2561 situtations!
+  //tsl2561.setTiming(TSL2561_INTEGRATIONTIME_13MS);  // shortest integration time (bright tsl2561)
+  //tsl2561.setTiming(TSL2561_INTEGRATIONTIME_101MS);  // medium integration time (medium tsl2561)
+  tsl2561.setTiming(TSL2561_INTEGRATIONTIME_402MS);  // longest integration time (dim tsl2561)
+  
+  // Now we're ready to get readings!
+}
+
+int main() {  
+    
+    PC_PRINTLNX(1,"----------START-------------");
+    
+    setup();    
+    
+    uint16_t x,y,z;
+      
+    while(1) {      
+    
+       
+        // Simple data read example. Just read the infrared, fullspecrtrum diode 
+        // or 'visible' (difference between the two) channels.
+        // This can take 13-402 milliseconds! Uncomment whichever of the following you want to read
+        x = tsl2561.getLuminosity(TSL2561_VISIBLE);     
+        y = tsl2561.getLuminosity(TSL2561_FULLSPECTRUM);
+        z = tsl2561.getLuminosity(TSL2561_INFRARED);
+        
+        PC_PRINTLNXY(1,"Visible: %d",x);
+        PC_PRINTLNXY(1,"Full Spectrum: %d",y);
+        PC_PRINTLNXY(1,"Infrared: %d",z);
+        
+        //More advanced data read example. Read 32 bits with top 16 bits IR, bottom 16 bits full spectrum
+        //That way you can do whatever math and comparisons you want!
+         // uint32_t lum = tsl2561.getFullLuminosity();
+       // uint16_t ir, full;
+      //  ir = lum >> 16;
+      //  full = lum & 0xFFFF;
+  
+     //   PC_PRINTLNXY(1,"Visible: %d",full - ir);
+     //   PC_PRINTLNXY(1,"Full Spectrum: %d",full);
+     //   PC_PRINTLNXY(1,"Infrared: %d",ir);  
+  
+    //    wait(1);
+     PC_PRINTLNX(1,"----------COMPLETE-------------");
+    }
+}