gjhn
Fork of X_NUCLEO_IDB0XA1 by
stm32_bluenrg_ble.cpp File Reference
Go to the source code of this file.
Functions | |
void | print_csv_time (void) |
This function is a utility to print the log time in the format HH:MM:SS:MSS (DK GUI time format) | |
void | Hal_Write_Serial (const void *data1, const void *data2, int32_t n_bytes1, int32_t n_bytes2) |
Writes data to a serial interface. | |
void | BlueNRG_HW_Bootloader (void) |
Activate internal bootloader using pin. | |
int32_t | BlueNRG_SPI_Read_All (uint8_t *buffer, uint8_t buff_size) |
Reads from BlueNRG SPI buffer and store data into local buffer. | |
int32_t | BlueNRG_SPI_Write (uint8_t *data1, uint8_t *data2, uint8_t Nb_bytes1, uint8_t Nb_bytes2) |
Writes data from local buffer to SPI. | |
void | Enable_SPI_IRQ (void) |
Enable SPI IRQ. | |
void | Disable_SPI_IRQ (void) |
Disable SPI IRQ. | |
void | Clear_SPI_IRQ (void) |
Clear Pending SPI IRQ. | |
void | Clear_SPI_EXTI_Flag (void) |
Clear EXTI (External Interrupt) line for SPI IRQ. |
Detailed Description
- Version:
- V1.0.0
- Date:
- 15-June-2015
- Attention:
© COPYRIGHT(c) 2014 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32_bluenrg_ble.cpp.
Function Documentation
void Clear_SPI_IRQ | ( | void | ) |
Clear Pending SPI IRQ.
- Parameters:
-
None
- Return values:
-
None
Definition at line 197 of file stm32_bluenrg_ble.cpp.
void Disable_SPI_IRQ | ( | void | ) |
Disable SPI IRQ.
Disable interrupts from BLE controller.
- Parameters:
-
None
- Return values:
-
None
Definition at line 187 of file stm32_bluenrg_ble.cpp.
void Enable_SPI_IRQ | ( | void | ) |
Enable SPI IRQ.
Enable interrupts from HCI controller.
- Parameters:
-
None
- Return values:
-
None
Definition at line 170 of file stm32_bluenrg_ble.cpp.
void Hal_Write_Serial | ( | const void * | data1, |
const void * | data2, | ||
int32_t | n_bytes1, | ||
int32_t | n_bytes2 | ||
) |
Writes data to a serial interface.
- Parameters:
-
data1 : 1st buffer data2 : 2nd buffer n_bytes1,: number of bytes in 1st buffer n_bytes2,: number of bytes in 2nd buffer
- Return values:
-
None
Definition at line 91 of file stm32_bluenrg_ble.cpp.
Generated on Tue Jul 12 2022 20:27:55 by 1.7.2