File content as of revision 308:de76b6d90215:

/******************** (C) COPYRIGHT 2012 STMicroelectronics ********************
* File Name          : ble_status.h
* Author             : AMS - HEA&RF BU
* Version            : V1.0.0
* Date               : 19-July-2012
* Description        : Header file with BLE Stack status codes.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
#ifndef __BLE_STATUS_H__
#define __BLE_STATUS_H__

#include <ble_hal_types.h>


/** @defgroup ble_status Bluetooth Status/Error Codes
 * @{
 */
 
typedef uint8_t tBleStatus; 

/* Error Codes as specified by the specification 
 * according to the spec the error codes range
 * from 0x00 to 0x3F 
 */
#define ERR_CMD_SUCCESS         	                (0x00)
#define BLE_STATUS_SUCCESS            		        (0x00)
#define ERR_UNKNOWN_HCI_COMMAND	                    (0x01)
#define ERR_UNKNOWN_CONN_IDENTIFIER	                (0x02)

#define ERR_AUTH_FAILURE                            (0x05)
#define ERR_PIN_OR_KEY_MISSING                      (0x06)
#define ERR_MEM_CAPACITY_EXCEEDED                   (0x07)
#define ERR_CONNECTION_TIMEOUT                      (0x08)

#define ERR_COMMAND_DISALLOWED				        (0x0C)

#define ERR_UNSUPPORTED_FEATURE				        (0x11)
#define ERR_INVALID_HCI_CMD_PARAMS                  (0x12)
#define ERR_RMT_USR_TERM_CONN                       (0x13)
#define ERR_RMT_DEV_TERM_CONN_LOW_RESRCES           (0x14)
#define ERR_RMT_DEV_TERM_CONN_POWER_OFF             (0x15)
#define ERR_LOCAL_HOST_TERM_CONN                    (0x16)

#define ERR_UNSUPP_RMT_FEATURE                      (0x1A)

#define ERR_INVALID_LMP_PARAM                       (0x1E)
#define ERR_UNSPECIFIED_ERROR                       (0x1F)

#define ERR_LL_RESP_TIMEOUT                         (0x22)
#define ERR_LMP_PDU_NOT_ALLOWED                     (0x24)

#define ERR_INSTANT_PASSED                          (0x28)

#define ERR_PAIR_UNIT_KEY_NOT_SUPP                  (0x29)
#define ERR_CONTROLLER_BUSY                         (0x3A)

#define ERR_DIRECTED_ADV_TIMEOUT                    (0x3C)

#define ERR_CONN_END_WITH_MIC_FAILURE               (0x3D)

#define ERR_CONN_FAILED_TO_ESTABLISH                (0x3E)


#define BLE_STATUS_FAILED             		(0x41)
#define BLE_STATUS_INVALID_PARAMS     		(0x42)
#define BLE_STATUS_BUSY               		(0x43)
#define BLE_STATUS_INVALID_LEN_PDU    		(0x44)
#define BLE_STATUS_PENDING            		(0x45)
#define BLE_STATUS_NOT_ALLOWED        		(0x46)
#define BLE_STATUS_ERROR              		(0x47)
#define BLE_STATUS_ADDR_NOT_RESOLVED        (0x48)

#define FLASH_READ_FAILED 					(0x49)
#define FLASH_WRITE_FAILED 					(0x4A)
#define FLASH_ERASE_FAILED 					(0x4B)

#define BLE_STATUS_INVALID_CID         		(0x50)

#define TIMER_NOT_VALID_LAYER				(0x54)
#define TIMER_INSUFFICIENT_RESOURCES		(0x55)
 
#define BLE_STATUS_CSRK_NOT_FOUND			(0x5A)
#define BLE_STATUS_IRK_NOT_FOUND			(0x5B)
#define BLE_STATUS_DEV_NOT_FOUND_IN_DB		(0x5C)
#define BLE_STATUS_SEC_DB_FULL				(0x5D)
#define BLE_STATUS_DEV_NOT_BONDED           (0x5E)
#define BLE_STATUS_DEV_IN_BLACKLIST         (0x5F)
 
#define BLE_STATUS_INVALID_HANDLE           (0x60)
#define BLE_STATUS_INVALID_PARAMETER        (0x61)
#define BLE_STATUS_OUT_OF_HANDLE            (0x62)
#define BLE_STATUS_INVALID_OPERATION        (0x63)
#define BLE_STATUS_INSUFFICIENT_RESOURCES   (0x64)
#define BLE_INSUFFICIENT_ENC_KEYSIZE		(0x65)
#define BLE_STATUS_CHARAC_ALREADY_EXISTS    (0x66)

 /*
  * Library Error Codes
  */
#define BLE_STATUS_TIMEOUT                     (0xFF)
#define BLE_STATUS_PROFILE_ALREADY_INITIALIZED (0xF0)
#define BLE_STATUS_NULL_PARAM                  (0xF1) 

/**
 * @}
 */
 

#endif /* __BLE_STATUS_H__ */