Diff: main.cpp

Revision:

0:33994cfad0c2

Child:

2:bb9f154ea2f4

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Jun 01 00:47:23 2014 +0000
@@ -0,0 +1,58 @@
+#include "mbed.h"
+//#include "ssd1306.h"
+#include "ssd1606.h"
+#include "Ebadge.h"
+
+#define STX 0x02
+#define ETX 0x03
+#define DISPWIDTH       172
+#define DISPHEIGHT  72
+#define DISPBPP     2
+#define DISPBUFSIZE DISPWIDTH * DISPHEIGHT * DISPBPP / 8
+
+// naked LPC1114 on breadboard, install LED pin28, pasive piezo-buzzer pin1
+DigitalOut myled(dp28);  // LED ... P0_7 (pin 28)
+Serial uart(dp16, dp15); // UART .. P1_7: TX (pin 16), P1_6: RX (pin 15)
+PwmOut pwm(dp1);         // PWM ... P0_8: CT16B0_MAT0 (pin1); sorry, blocking SPI!  
+
+
+uint16_t xmtptr;
+uint16_t xmtsize;
+
+//SSD1306 display(dp2,dp4,dp5,dp6,dp10);
+// SSD1606(cs, rst, dc, clk, busy, data);
+SSD1606 display(P0_6,P0_7,P2_0,P1_10,P1_5,P1_11);
+
+char c;
+
+void setup() {
+    //char c = '0';
+  pwm.period(0.001);  // PWM period 1ms (1kHz)   
+  uart.baud(115200);  // Baud rate
+  uart.puts("\n\rE-Badge Demo\n\r");
+}
+
+void loop() {
+        if (uart.readable()) {
+            c = uart.getc();
+            uart.putc(c);
+            }
+}
+
+int main() {
+    setup();
+    
+  while(1) {    // repeat (period 1sec)
+        /*
+    myled = 0;  // LED on
+    pwm = 0.5;  // PWM duty cycle 50%, tone 1kHz
+    wait(0.5);
+    uart.putc(c++); if (c > '9') c = '0';  // Put Character & rotate 0,1,2,... 9
+    myled = 1;  // LED off
+    pwm = 0;    // PWM stop, silent
+    wait(0.5);
+    uart.puts(" Hello world.\n\r");  // Put String "Hello..."
+        */
+        loop();
+    }       
+}