Akash Gaikwad / Mbed 2 deprecated ATT_Cellular_IOT_Using_ATT_Flow_and_M2X_Cloud

Remote I/O Sensor bus with AT&T flow and M2X cloud

Dependencies:   DHT11 FXOS8700CQ MODSERIAL mbed

Fork of Avnet_ATT_Cellular_IOT by Avnet

Revisions of sensors.cpp

Revision Date Message Actions
82:4e608375910a 2018-04-17 Remote I/O Sensor bus with AT&T flow and M2X cloud File  Diff  Annotate
77:c65eae5b9958 2016-08-15 Fixed some missing \r.; Added report of app version.; Added report of WNC firmware version.; File  Diff  Annotate
72:b500e1507b5f 2016-08-11 Add 4s startup delay and changed GPS_valid to number of satellites. File  Diff  Annotate
71:45a5e426df81 2016-08-11 Added GPS to FLOW. File  Diff  Annotate
70:24d5800f27be 2016-08-11 Correct GPS init error File  Diff  Annotate
69:5a3414cc7531 2016-08-11 Added code for Xadow GPS. Not done sending to Flow Designer yet. File  Diff  Annotate
68:6e311c747045 2016-08-11 Added Avnet copyright headers on all source files. File  Diff  Annotate
64:09004cd610df 2016-08-01 Replaced all printf's with PRINTF=pc.printf; moved to latest mbed library File  Diff  Annotate
61:f6b93129f954 2016-08-01 Moved cellular modem routines from main.cpp to cell_modem.cpp; Moved HTS221 routines from main.cpp to sensors.cpp File  Diff  Annotate
57:d184175b6b03 2016-07-28 Found that a merge at some point used an older version of sensors.cpp. Replacing the omitted changes... File  Diff  Annotate
56:cb42ff383dab 2016-07-28 Changes USB UART to use MODSERIAL library File  Diff  Annotate
55:3abf9e3f42e6 2016-07-28 Added virtual sensors. This uses the USB Rx unless you un-comment USE_VIRTUAL_SENSORS. Also reverted to mbed 119 because of problems. File  Diff  Annotate
11:e6602513730f 2016-07-12 Fixed I2C issues. ; a) Removed stop between HTS221 address and read; b) The latest MBED uses the slave address differently from the legacy. Stick with the old for now and fixed the HTS221 address to BF instead of 5F.; c) Made I2C definitions externs. File  Diff  Annotate
4:f83bedd9cab4 2016-07-11 Added a sensors file that will write the FRDM-K64F motion sensor and the values from the SiLabs PMOD into a structure. File  Diff  Annotate