USB Serial application
Fork of USBSerial_HelloWorld by
mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/spi.h
- Committer:
- Zaitsev
- Date:
- 2017-01-10
- Revision:
- 10:41552d038a69
File content as of revision 10:41552d038a69:
/** ****************************************************************************** * @file spi.h * @brief Inlcude file of a SPI master driver * @internal * @author ON Semiconductor * @version $Rev: $ * @date $Date: 2016-02-05 $ ****************************************************************************** * Copyright 2016 Semiconductor Components Industries LLC (d/b/a ON Semiconductor). * All rights reserved. This software and/or documentation is licensed by ON Semiconductor * under limited terms and conditions. The terms and conditions pertaining to the software * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf * (ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software) and * if applicable the software license agreement. Do not use this software and/or * documentation unless you have carefully read and you agree to the limited terms and * conditions. By using this software and/or documentation, you agree to the limited * terms and conditions. * * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. * @endinternal * * @ingroup spi_h * * @details * */ #ifndef SPI_H_ #define SPI_H_ #include "device.h" #include "spi_api.h" #if DEVICE_SPI #ifdef __cplusplus extern "C" { #endif /* Miscellaneous I/O and control operations codes */ #define SPI_IPC7207_IOCTL_GET_SLAVE_SELECT (0x1) /**< <b>Ioctl request code</b>: Reading slaveSelect register */ #define SPI_IPC7207_IOCTL_SET_SLAVE_SELECT (0x2) /**< <b>Ioctl request code</b>: Setting slaveSelect register */ #define SPI_IPC7207_IOCTL_FLUSH (0x3) /**< <b>Ioctl request code</b>: Flushin FIFOs and serial shift registers */ /* Control register bit positions */ #define SPI_WORD_WIDTH_BIT_POS 6 #define SPI_SLAVE_MASTER_BIT_POS 5 #define SPI_CPOL_BIT_POS 4 #define SPI_CPHA_BIT_POS 3 #define SPI_ENDIAN_BIT_POS 2 #define SPI_SAMPLE_EDGE_BIT_POS 1 #define SPI_PORT_ENABLE_BIT_POS 0 /* COntrol register bits */ #define SPI_ENDIAN_MSB_FIRST 1 #define SPI_CPOL_IDLE_LOW 0 #define SPI_CPHA_BEFORE_1ST_EDGE 0 #define SPI_MASTER_MODE 1 #define SPI_WORD_WIDTH_8_BITS 0 #define SPI_SAMPLE_OPP_CLK_EDGE_DATA 0 #define SPI_SLAVE_SELECT_NORM_BEHAVE 0 #define SPI_PORT_ENABLE 1 #define SPI_SLAVE_SELECT_DEFAULT 0x10 #define SPI_DEFAULT_CONFIG 0x25 #define SPI_DEFAULT_SPEED 1000000 #define SPI_BYTE_MASK 0xFF extern void fSpiInit(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel); extern void fSpiClose(spi_t *obj); extern int fSpiWriteB(spi_t *obj, uint32_t const buf); #ifdef __cplusplus } #endif /* __cplusplus */ #endif /* DEVICE_SPI */ #endif /* SPI_H_ */