Librairie adaptée au laboratoire 2

Dependencies:   ST_INTERFACES X_NUCLEO_COMMON

Fork of X_NUCLEO_6180XA1 by ST

Revision:
57:fa4c622b04a7
Parent:
56:37d1736bd896
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/XNucleo6180XA1.h	Mon Mar 13 19:08:10 2017 +0000
@@ -0,0 +1,236 @@
+/**
+ ******************************************************************************
+ * @file    XNucleo6180XA1.h
+ * @author  AST / EST
+ * @version V0.0.1
+ * @date    13-April-2015
+ * @brief   Header file for class X_NUCLEO_6180XA1 representing a X-NUCLEO-6180XA1
+ *          expansion board
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *   1. Redistributions of source code must retain the above copyright notice,
+ *      this list of conditions and the following disclaimer.
+ *   2. Redistributions in binary form must reproduce the above copyright notice,
+ *      this list of conditions and the following disclaimer in the documentation
+ *      and/or other materials provided with the distribution.
+ *   3. Neither the name of STMicroelectronics nor the names of its contributors
+ *      may be used to endorse or promote products derived from this software
+ *      without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Define to prevent from recursive inclusion --------------------------------*/
+
+#ifndef __X_NUCLEO_6180XA1_H
+#define __X_NUCLEO_6180XA1_H
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "mbed.h"
+#include "VL6180X.h"
+#include "Display.h"
+#include "STMPE1600.h"
+#include "DevI2C.h"
+#include "Switch.h"
+
+/** New device addresses */
+#define NEW_SENSOR_TOP_ADDRESS			0x10
+#define NEW_SENSOR_BOTTOM_ADDRESS		0x11
+#define NEW_SENSOR_LEFT_ADDRESS			0x12
+#define NEW_SENSOR_RIGHT_ADDRESS		0x13
+
+
+/* Classes--------------------------------------------------------------------*/
+
+/**
+ * Class representing the X-NUCLEO-VL6180XA1 expansion board singleton obj
+ */
+class XNucleo6180XA1
+{
+protected:
+    /** Constructor 1
+     * @brief       x_nucleo_6180xa1 board Constructor. Default the INT gpio \
+     * configuration as the electrical schematic. Self sensing for optional \
+     * expansion sensors (L/B/R). 
+     * @param[in] &i2c device I2C to be used for communication
+     */
+    XNucleo6180XA1(DevI2C *ext_i2c) : dev_i2c(ext_i2c)
+    {
+        stmpe1600 = new STMPE1600(*ext_i2c);		
+        stmpe1600->write_sys_ctrl (SOFT_RESET);		
+        the_switch = new Switch (*stmpe1600, GPIO_11);	
+        display = new Display(*stmpe1600);			
+
+        _gpio0_top=new STMPE1600DigiOut(*dev_i2c, GPIO_12);
+        sensor_top=new VL6180X(*dev_i2c, *_gpio0_top, A3);
+
+        _gpio0_bottom=new STMPE1600DigiOut(*dev_i2c, GPIO_13);
+        sensor_bottom=new VL6180X(*dev_i2c, *_gpio0_bottom, A2);
+
+        _gpio0_left=new STMPE1600DigiOut(*dev_i2c, GPIO_14);
+        sensor_left=new VL6180X(*dev_i2c, *_gpio0_left, D13);
+
+        _gpio0_right=new STMPE1600DigiOut(*dev_i2c, GPIO_15);
+        sensor_right=new VL6180X(*dev_i2c, *_gpio0_right, D2);
+
+        if (init_board()) {   // init failed
+            printf ("ERROR Init X-NUCLEO-6180XA1 Board\n\r");
+       	}      
+    }
+    
+    /** Constructor 2
+     * @param[in] &i2c device I2C to be used for communication
+     * @param[in] PinName gpio1_top Mbed DigitalOut pin name to be used as a top sensor GPIO_1 INT
+     * @param[in] PinName gpio1_bottom Mbed DigitalOut pin name to be used as a bottom sensor GPIO_1 INT
+     * @param[in] PinName gpio1_left Mbed DigitalOut pin name to be used as a left sensor GPIO_1 INT
+     * @param[in] PinName gpio1_right Mbed DigitalOut pin name to be used as a right sensor GPIO_1 INT               
+     */    
+    XNucleo6180XA1(DevI2C *ext_i2c, PinName gpio1_top, PinName gpio1_bottom,
+    		 					 PinName gpio1_left, PinName gpio1_right) : dev_i2c(ext_i2c) {
+       stmpe1600 = new STMPE1600(*ext_i2c);		    		 						  	
+       stmpe1600->write_sys_ctrl (SOFT_RESET);	
+       the_switch = new Switch (*stmpe1600, GPIO_11);	
+       display = new Display(*stmpe1600);			
+
+       _gpio0_top=new STMPE1600DigiOut(*dev_i2c, GPIO_12);			
+       sensor_top=new VL6180X(*dev_i2c, *_gpio0_top, gpio1_top);
+       
+       _gpio0_bottom=new STMPE1600DigiOut(*dev_i2c, GPIO_13);   
+       sensor_bottom=new VL6180X(*dev_i2c, *_gpio0_bottom, gpio1_bottom);
+ 
+       _gpio0_left=new STMPE1600DigiOut(*dev_i2c, GPIO_14);      
+       sensor_left=new VL6180X(*dev_i2c, *_gpio0_left, gpio1_left);
+       
+       _gpio0_right=new STMPE1600DigiOut(*dev_i2c, GPIO_15);
+       sensor_right=new VL6180X(*dev_i2c, *_gpio0_right, gpio1_right);   	
+    }  
+
+    /**
+     * @brief       Override default copy constructor as empty
+     * @param[in]   &XNucleo6180XA1 singleton object reference
+     * @return     
+     */		    
+    XNucleo6180XA1() {};
+    
+    /**
+     * @brief       Override default assignement operator to avoid multiple singletons
+     * @param[in]   &XNucleo6180XA1 singleton object reference
+     * @return     
+     */		    
+    void operator = (const XNucleo6180XA1&);
+    
+public:
+    /**
+     * @brief       Creates a singleton object instance
+     * @param[in]   &i2c device I2C to be used for communication
+     * @return      Pointer to the object instance
+     */					     
+    static XNucleo6180XA1 *instance(DevI2C *ext_i2c);
+    
+    /**
+     * @brief       Creates a singleton object instance
+     * @param[in]   &i2c device I2C to be used for communication
+     * @param[in]   PinName gpio1_top the pin connected to top sensor INT     
+     * @param[in]   PinName gpio1_bottem the pin connected to bottom sensor INT          
+     * @param[in]   PinName gpio1_left the pin connected to left sensor INT          
+     * @param[in]   PinName gpio1_right the pin connected to right sensor INT          
+  	 * @return      Pointer to the object instance
+  	 */					         
+    static XNucleo6180XA1 *instance(DevI2C *ext_i2c, PinName gpio1_top, PinName gpio1_bottom,
+                                    PinName gpio1_left, PinName gpio1_right);
+    
+  	/**
+  	 * @brief       Initialize the board and sensors with deft values
+  	 * @return      0 on success
+  	 */		
+    int init_board();
+
+  	/**
+  	 * @brief       Read the on board red slider switch
+  	 * @return      0 or 1 according to switch position
+  	 */				
+    bool rd_switch () {
+	     return the_switch->rd_switch();	
+    }
+    
+  	/**
+  	 * @brief       Check the presence of sensor top. To be called after init_board
+  	 * @return      true is present, false if absent
+  	 */				
+    	bool is_sensor_top_present() {
+    		if (sensor_top) {
+            return true;
+        }
+    		return false;
+  	} 
+
+  	/**
+  	 * @brief       Check the presence of sensor bottom.  To be called after init_board
+  	 * @return      true is present, false if absent
+  	 */				
+  	bool is_sensor_bottom_present() {
+    		if (sensor_bottom) {
+            return true;
+        }
+    		return false;
+  	} 
+  	
+  	/**
+  	 * @brief       Check the presence of sensor left.  To be called after init_board
+  	 * @return      true is present, false if absent
+  	 */				
+  	bool is_sensor_left_present() {
+    		if (sensor_left) {
+            return true;
+        }
+    		return false;
+  	} 
+  	
+  	/**
+  	 * @brief       Check the presence of sensor right.  To be called after init_board
+  	 * @return      true is present, false if absent
+  	 */				
+    bool is_sensor_right_present() {
+    		if (sensor_right) {
+            return true;
+        }
+    		return false;
+    }
+
+    DevI2C *dev_i2c;
+    VL6180X *sensor_top;
+    VL6180X *sensor_bottom;
+    VL6180X *sensor_left;
+    VL6180X *sensor_right;
+    STMPE1600 *stmpe1600;
+    Switch *the_switch;	    
+    Display *display;
+    
+private:
+    STMPE1600DigiOut *_gpio0_top;
+    STMPE1600DigiOut *_gpio0_bottom;
+    STMPE1600DigiOut *_gpio0_left;
+    STMPE1600DigiOut *_gpio0_right;    
+    static XNucleo6180XA1 *_instance;
+};
+
+#endif /* __X_NUCLEO_6180XA1_H */