Revision 25:e67d3d9d2e7e, committed 2019-05-29

Comitter:

wajahat.abbas@u-blox.com

Date:

Wed May 29 12:39:28 2019 +0500

Parent:

24:e26a6ab0dd75

Commit message:

Added support for +UPSV (idle mode) for C030_R412M

Changed in this revision

diff -r e26a6ab0dd75 -r e67d3d9d2e7e UbloxATCmdParser.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/UbloxATCmdParser.cpp	Wed May 29 12:39:28 2019 +0500
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifdef TARGET_UBLOX_C030_R41XM
+
+#include "UbloxATCmdParser.h"
+#include "rtos/Thread.h"
+
+using namespace mbed;
+
+UbloxATCmdParser::UbloxATCmdParser(FileHandle *fh, const char *output_delimiter, int buffer_size, int timeout, bool debug) : ATCmdParser(fh, output_delimiter, buffer_size, timeout, debug)
+{
+    idle_mode_disabled();
+}
+UbloxATCmdParser::~UbloxATCmdParser()
+{
+
+}
+
+
+bool UbloxATCmdParser::send(const char *command, ...)
+{
+    bool status = false;
+
+    if (_idle_mode_status == true) { //idle mode is active
+        if ( _wakeup_timer.read_ms() >= 5000) { //if more than 5 secs have passed since last TX activity, wake up the modem.
+            uint8_t retries = 3;
+            ATCmdParser::set_timeout(1000);
+            while(retries--) {
+                ATCmdParser::putc('A');
+                wait_ms(10); //wait a little
+                if ( (ATCmdParser::send("AT")) && (ATCmdParser::recv("OK")) ) { //check if modem is awake and accepting commands
+                    status = true;
+                    break;
+                }
+            }
+            ATCmdParser::set_timeout(_timeout);
+            if (status == false) { //all tries failed, return false
+                _wakeup_timer.reset();
+                return status;
+            }
+        }
+        _wakeup_timer.reset(); //Any activity on tx will reset the timer. Timer will expire if no activity since last 5 secs
+    }
+
+    va_list args;
+    va_start(args, command);
+    status = ATCmdParser::vsend(command, args);
+    va_end(args);
+    return status;
+}
+
+void UbloxATCmdParser::idle_mode_enabled()
+{
+    _idle_mode_status = true;
+    _wakeup_timer.start();
+}
+
+void UbloxATCmdParser::idle_mode_disabled()
+{
+    _idle_mode_status = false;
+    _wakeup_timer.stop();
+}
+
+bool UbloxATCmdParser::is_idle_mode_enabled()
+{
+	return _idle_mode_status;
+}
+
+void UbloxATCmdParser::set_timeout(int timeout) {
+    _timeout = timeout;
+    ATCmdParser::set_timeout(timeout);
+}
+#endif /* TARGET_UBLOX_C030_R41XM */

diff -r e26a6ab0dd75 -r e67d3d9d2e7e UbloxATCmdParser.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/UbloxATCmdParser.h	Wed May 29 12:39:28 2019 +0500
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifdef TARGET_UBLOX_C030_R41XM
+#ifndef UBLOXATCMDPARSER_H_
+#define UBLOXATCMDPARSER_H_
+
+#include "ATCmdParser.h"
+#include "mbed.h"
+
+namespace mbed {
+
+/**
+ *  Class UbloxATCmdParser
+ *
+ */
+class UbloxATCmdParser : public ATCmdParser
+{
+public:
+    UbloxATCmdParser(FileHandle *fh, const char *output_delimiter = "\r",
+             int buffer_size = 256, int timeout = 8000, bool debug = false);
+    ~UbloxATCmdParser();
+
+    bool send(const char *command, ...) MBED_PRINTF_METHOD(1,2);
+
+    void set_timeout(int timeout);
+
+    bool is_idle_mode_enabled();
+
+	void idle_mode_enabled();
+
+    void idle_mode_disabled();
+	
+private:
+    bool _idle_mode_status;
+    Timer _wakeup_timer;
+    int _timeout;
+};
+
+
+} // namespace mbed
+
+#endif
+#endif
+

diff -r e26a6ab0dd75 -r e67d3d9d2e7e UbloxCellularBase.cpp
--- a/UbloxCellularBase.cpp	Tue May 28 15:39:51 2019 +0500
+++ b/UbloxCellularBase.cpp	Wed May 29 12:39:28 2019 +0500
@@ -532,8 +532,13 @@
         _fh = new UARTSerial(tx, rx, baud);
 
         // Set up the AT parser
+#ifdef TARGET_UBLOX_C030_R41XM
+        _at = new UbloxATCmdParser(_fh, OUTPUT_ENTER_KEY, AT_PARSER_BUFFER_SIZE,
+                              _at_timeout, _debug_trace_on);
+#else
         _at = new ATCmdParser(_fh, OUTPUT_ENTER_KEY, AT_PARSER_BUFFER_SIZE,
                               _at_timeout, _debug_trace_on);
+#endif
 
         // Error cases, out of band handling
         _at->oob("ERROR", callback(this, &UbloxCellularBase::parser_abort_cb));
@@ -813,6 +818,11 @@
                         set_power_saving_mode(0, 0);
                     }
 #endif
+#ifdef TARGET_UBLOX_C030_R41XM
+                    if (_at->is_idle_mode_enabled() == false) {
+                        set_idle_mode(false); //disable idle mode at start up
+                    }
+#endif
                     if (set_device_identity(&_dev_info.dev) && // Set up device identity
                         device_init(_dev_info.dev)) {// Initialise this device
                         // Get the integrated circuit ID of the SIM
@@ -1296,7 +1306,57 @@
     UNLOCK();
     return return_val;
 }
+// Enable or Disable the UPSV power saving mode
+bool UbloxCellularBase::set_idle_mode(bool enable)
+{
+#ifdef TARGET_UBLOX_C030_R412M
+    if (_psm_status == true && enable == true) {
+        return false;
+    }
 #endif
+
+    bool success = false;
+    LOCK();
+
+    MBED_ASSERT(_at != NULL);
+
+    if (_at->send("AT+UPSV=%d", enable ? 4 : 0) && _at->recv("OK")) {
+        if (enable == true) {
+            _at->idle_mode_enabled();
+        }
+        else {
+            _at->idle_mode_disabled();
+        }
+        success = true;
+    }
+
+    UNLOCK();
+    return success;
+}
+
+bool UbloxCellularBase::get_idle_mode(int *status)
+{
+    bool return_val = false;
+
+    if (status == NULL) {
+        return false;
+    }
+
+    LOCK();
+    MBED_ASSERT(_at != NULL);
+
+    if ( (_at->send("AT+UPSV?") && _at->recv("+UPSV: %d", status) && _at->recv("OK")) )  {
+        if (*status == 4) {
+            *status = 1;
+        }
+        return_val = true;
+    }
+
+    UNLOCK();
+    return return_val;
+}
+#endif
+
 #ifdef TARGET_UBLOX_C030_R412M
 bool UbloxCellularBase::get_power_saving_mode(int *status, int *periodic_time, int *active_time)
 {
@@ -1305,6 +1365,10 @@
     int value, multiplier;
     bool return_val;
 
+    if (status == NULL || periodic_time == NULL || active_time == NULL) {
+        return false;
+    }
+
     LOCK();
     //+UCPSMS:1,,,"01000011","01000011"
     if (_at->send("AT+UCPSMS?") && _at->recv("+UCPSMS:%d,,,\"%8c\",\"%8c\"\n", status, pt_encoded, at_encoded)) {
@@ -1405,6 +1469,9 @@
 
 bool UbloxCellularBase::set_power_saving_mode(int periodic_time, int active_time)
 {
+    if (_at->is_idle_mode_enabled() == true && periodic_time != 0 && active_time != 0 ) {
+        return false;
+    }
     bool return_val = false;
 
     LOCK();

diff -r e26a6ab0dd75 -r e67d3d9d2e7e UbloxCellularBase.h
--- a/UbloxCellularBase.h	Tue May 28 15:39:51 2019 +0500
+++ b/UbloxCellularBase.h	Wed May 29 12:39:28 2019 +0500
@@ -18,7 +18,7 @@
 
 #include "mbed.h"
 #include "mbed_toolchain.h" // for MBED_DEPRECATED
-#include "ATCmdParser.h"
+#include "ubloxATCmdParser.h"
 #include "FileHandle.h"
 
 /**********************************************************************
@@ -253,6 +253,23 @@
      * @return    true if operation was successful, false if there was an error
      */
     bool get_mno_profile(int *profile);
+
+    /** Enable or disable the UPSV Power Saving Mode.
+     *
+     * @param idle_mode_value  1: enable idle mode
+     *                         0: disable idle mode
+     * @return                 true if successful, otherwise false.
+     */
+    bool set_idle_mode(bool enable = false);
+
+    /** Queries the modem for idle mode status.
+     *
+     * @param status pointer to variable that can hold the value for idle mode status
+     *                         1: enabled
+     *                         0: disabled
+     * @return                 true if successful, otherwise false.
+     */
+    bool get_idle_mode(int *status);
 #endif
 
     /** Set Radio Access Technology on modem.
@@ -458,7 +475,11 @@
 
     /** Point to the instance of the AT parser in use.
      */
+#ifdef TARGET_UBLOX_C030_R41XM
+    UbloxATCmdParser *_at;
+#else
     ATCmdParser *_at;
+#endif
 
     /** The current AT parser timeout value.
      */