Diff: mbed-os/platform/mbed_power_mgmt.h

Revision:

0:9b3d4731edbb

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os/platform/mbed_power_mgmt.h	Thu Jun 21 13:51:43 2018 +0000
@@ -0,0 +1,245 @@
+/** \addtogroup platform */
+/** @{*/
+/**
+ * \defgroup platform_power_mgmt Power management functions
+ * @{
+ */
+
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2018 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_POWER_MGMT_H
+#define MBED_POWER_MGMT_H
+
+#include "sleep_api.h"
+#include "mbed_toolchain.h"
+#include "hal/ticker_api.h"
+#include <stdbool.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Sleep manager API
+ * The sleep manager provides API to automatically select sleep mode.
+ *
+ * There are two sleep modes:
+ * - sleep
+ * - deepsleep
+ *
+ * Use locking/unlocking deepsleep for drivers that depend on features that
+ * are not allowed (=disabled) during the deepsleep. For instance, high frequency
+ * clocks.
+ *
+ * Example:
+ * @code
+ *
+ * void driver::handler()
+ * {
+ *     if (_sensor.get_event()) {
+ *         // any event - we are finished, unlock the deepsleep
+ *         sleep_manager_unlock_deep_sleep();
+ *         _callback();
+ *     }
+ * }
+ *
+ * int driver::measure(event_t event, callback_t& callback)
+ * {
+ *      _callback = callback;
+ *      sleep_manager_lock_deep_sleep();
+ *      // start async transaction, we are waiting for an event
+ *      return _sensor.start(event, callback);
+ * }
+ * @endcode
+ */
+#ifdef MBED_SLEEP_TRACING_ENABLED
+
+void sleep_tracker_lock(const char *const filename, int line);
+void sleep_tracker_unlock(const char *const filename, int line);
+
+#define sleep_manager_lock_deep_sleep()              \
+    do                                               \
+    {                                                \
+        sleep_manager_lock_deep_sleep_internal();    \
+        sleep_tracker_lock(MBED_FILENAME, __LINE__); \
+    } while (0);
+
+#define sleep_manager_unlock_deep_sleep()              \
+    do                                                 \
+    {                                                  \
+        sleep_manager_unlock_deep_sleep_internal();    \
+        sleep_tracker_unlock(MBED_FILENAME, __LINE__); \
+    } while (0);
+
+#else
+
+#define sleep_manager_lock_deep_sleep() \
+    sleep_manager_lock_deep_sleep_internal()
+
+#define sleep_manager_unlock_deep_sleep() \
+    sleep_manager_unlock_deep_sleep_internal()
+
+#endif // MBED_SLEEP_TRACING_ENABLED
+
+/** Lock the deep sleep mode
+ *
+ * This locks the automatic deep mode selection.
+ * sleep_manager_sleep_auto() will ignore deepsleep mode if
+ * this function is invoked at least once (the internal counter is non-zero)
+ *
+ * Use this locking mechanism for interrupt driven API that are
+ * running in the background and deepsleep could affect their functionality
+ *
+ * The lock is a counter, can be locked up to USHRT_MAX
+ * This function is IRQ and thread safe
+ */
+void sleep_manager_lock_deep_sleep_internal(void);
+
+/** Unlock the deep sleep mode
+ *
+ * Use unlocking in pair with sleep_manager_lock_deep_sleep().
+ *
+ * The lock is a counter, should be equally unlocked as locked
+ * This function is IRQ and thread safe
+ */
+void sleep_manager_unlock_deep_sleep_internal(void);
+
+/** Get the status of deep sleep allowance for a target
+ *
+ * @return true if a target can go to deepsleep, false otherwise
+ */
+bool sleep_manager_can_deep_sleep(void);
+
+/** Enter auto selected sleep mode. It chooses the sleep or deeepsleep modes based
+ *  on the deepsleep locking counter
+ *
+ * This function is IRQ and thread safe
+ *
+ * @note
+ * If MBED_DEBUG is defined, only hal_sleep is allowed. This ensures the debugger
+ * to be active for debug modes.
+ *
+ */
+void sleep_manager_sleep_auto(void);
+
+/** Send the microcontroller to sleep
+ *
+ * @note This function can be a noop if not implemented by the platform.
+ * @note This function will be a noop in debug mode (debug build profile when MBED_DEBUG is defined).
+ * @note This function will be a noop while uVisor is in use.
+ * @note This function will be a noop if the following conditions are met:
+ *   - The RTOS is present
+ *   - The processor turn off the Systick clock during sleep
+ *   - The target does not implement tickless mode
+ *
+ * The processor is setup ready for sleep, and sent to sleep using __WFI(). In this mode, the
+ * system clock to the core is stopped until a reset or an interrupt occurs. This eliminates
+ * dynamic power used by the processor, memory systems and buses. The processor, peripheral and
+ * memory state are maintained, and the peripherals continue to work and can generate interrupts.
+ *
+ * The processor can be woken up by any internal peripheral interrupt or external pin interrupt.
+ *
+ * @note
+ *  The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+static inline void sleep(void)
+{
+#if !(defined(FEATURE_UVISOR) && defined(TARGET_UVISOR_SUPPORTED))
+#if DEVICE_SLEEP
+#if (MBED_CONF_RTOS_PRESENT == 0) || (DEVICE_STCLK_OFF_DURING_SLEEP == 0) || defined(MBED_TICKLESS)
+    sleep_manager_sleep_auto();
+#endif /* (MBED_CONF_RTOS_PRESENT == 0) || (DEVICE_STCLK_OFF_DURING_SLEEP == 0) || defined(MBED_TICKLESS) */
+#endif /* DEVICE_SLEEP */
+#endif /* !(defined(FEATURE_UVISOR) && defined(TARGET_UVISOR_SUPPORTED)) */
+}
+
+/** Send the microcontroller to deep sleep
+ *
+ * @deprecated
+ * Do not use this function. Applications should use sleep() API which puts the system in deepsleep mode if supported. 
+ *
+ * @note This function can be a noop if not implemented by the platform.
+ * @note This function will be a noop in debug mode (debug build profile when MBED_DEBUG is defined)
+ * @note This function will be a noop while uVisor is in use.
+ *
+ * This processor is setup ready for deep sleep, and sent to sleep. This mode
+ * has the same sleep features as sleep plus it powers down peripherals and clocks. All state
+ * is still maintained.
+ *
+ * The processor can only be woken up by an external interrupt on a pin or a watchdog timer.
+ *
+ * @note
+ *  The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+
+MBED_DEPRECATED_SINCE("mbed-os-5.6", "One entry point for an application, use sleep()")
+static inline void deepsleep(void)
+{
+#if !(defined(FEATURE_UVISOR) && defined(TARGET_UVISOR_SUPPORTED))
+#if DEVICE_SLEEP
+    sleep_manager_sleep_auto();
+#endif /* DEVICE_SLEEP */
+#endif /* !(defined(FEATURE_UVISOR) && defined(TARGET_UVISOR_SUPPORTED)) */
+}
+
+/** Resets the processor and most of the sub-system
+ *
+ * @note Does not affect the debug sub-system
+ */
+static inline void system_reset(void)
+{
+    NVIC_SystemReset();
+}
+ 
+/** Provides the time spent in sleep mode since boot.
+ *
+ *  @return  Time spent in sleep
+ *  @note  Works only if platform supports LP ticker.
+ */
+us_timestamp_t mbed_time_sleep(void);
+
+/** Provides the time spent in deep sleep mode since boot.
+ *
+ *  @return  Time spent in deep sleep
+ *  @note  Works only if platform supports LP ticker.
+ */
+us_timestamp_t mbed_time_deepsleep(void);
+
+/** Provides the time spent in idle mode since boot.
+ *
+ * @return  Idle thread time.
+ * @note  Works only if platform supports LP ticker.
+ */
+us_timestamp_t mbed_time_idle(void);
+
+/** Provides the time since the system is up i.e. boot.
+ *
+ * @return  System uptime.
+ * @note  Works only if platform supports LP ticker.
+ */
+us_timestamp_t mbed_uptime(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/** @}*/
+/** @}*/