Diff: mbed-os/hal/mbed_lp_ticker_wrapper.cpp

Revision:

0:9b3d4731edbb

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os/hal/mbed_lp_ticker_wrapper.cpp	Thu Jun 21 13:51:43 2018 +0000
@@ -0,0 +1,156 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2018 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "hal/lp_ticker_api.h"
+
+#if DEVICE_LPTICKER && (LPTICKER_DELAY_TICKS > 0)
+
+#include "Timeout.h"
+#include "mbed_critical.h"
+
+static const timestamp_t min_delta = LPTICKER_DELAY_TICKS;
+
+static bool init = false;
+static bool pending = false;
+static bool timeout_pending = false;
+static timestamp_t last_set_interrupt = 0;
+static timestamp_t last_request = 0;
+static timestamp_t next = 0;
+
+static timestamp_t mask;
+static timestamp_t reschedule_us;
+
+// Do not use SingletonPtr since this must be initialized in a critical section
+static mbed::Timeout *timeout;
+static uint64_t timeout_data[sizeof(mbed::Timeout) / 8];
+
+/**
+ * Initialize variables
+ */
+static void init_local()
+{
+    MBED_ASSERT(core_util_in_critical_section());
+
+    const ticker_info_t* info = lp_ticker_get_info();
+    if (info->bits >= 32) {
+        mask = 0xffffffff;
+    } else {
+        mask = ((uint64_t)1 << info->bits) - 1;
+    }
+
+    // Round us_per_tick up
+    timestamp_t us_per_tick = (1000000 + info->frequency - 1) / info->frequency;
+
+    // Add 1 tick to the min delta for the case where the clock transitions after you read it
+    // Add 4 microseconds to round up the micro second ticker time (which has a frequency of at least 250KHz - 4us period)
+    reschedule_us = (min_delta + 1) * us_per_tick + 4;
+
+    timeout = new (timeout_data) mbed::Timeout();
+}
+
+/**
+ * Call lp_ticker_set_interrupt with a value that is guaranteed to fire
+ *
+ * Assumptions
+ * -Only one low power clock tick can pass from the last read (last_read)
+ * -The closest an interrupt can fire is max_delta + 1
+ *
+ * @param last_read The last value read from lp_ticker_read
+ * @param timestamp The timestamp to trigger the interrupt at
+ */
+static void set_interrupt_safe(timestamp_t last_read, timestamp_t timestamp)
+{
+    MBED_ASSERT(core_util_in_critical_section());
+    uint32_t delta = (timestamp - last_read) & mask;
+    if (delta < min_delta + 2) {
+        timestamp = (last_read + min_delta + 2) & mask;
+    }
+    lp_ticker_set_interrupt(timestamp);
+}
+
+/**
+ * Set the low power ticker match time when hardware is ready
+ *
+ * This event is scheduled to set the lp timer after the previous write
+ * has taken effect and it is safe to write a new value without blocking.
+ * If the time has already passed then this function fires and interrupt
+ * immediately.
+ */
+static void set_interrupt_later()
+{
+    core_util_critical_section_enter();
+
+    timestamp_t current = lp_ticker_read();
+    if (_ticker_match_interval_passed(last_request, current, next)) {
+        lp_ticker_fire_interrupt();
+    } else {
+        set_interrupt_safe(current, next);
+        last_set_interrupt = lp_ticker_read();
+    }
+    timeout_pending = false;
+
+    core_util_critical_section_exit();
+}
+
+/**
+ * Wrapper around lp_ticker_set_interrupt to prevent blocking
+ *
+ * Problems this function is solving:
+ * 1. Interrupt may not fire if set earlier than LPTICKER_DELAY_TICKS low power clock cycles
+ * 2. Setting the interrupt back-to-back will block
+ *
+ * This wrapper function prevents lp_ticker_set_interrupt from being called
+ * back-to-back and blocking while the first write is in progress. This function
+ * avoids that problem by scheduling a timeout event if the lp ticker is in the
+ * middle of a write operation.
+ *
+ * @param timestamp Time to call ticker irq
+ * @note this is a utility function and it's not required part of HAL implementation
+ */
+extern "C" void lp_ticker_set_interrupt_wrapper(timestamp_t timestamp)
+{
+    core_util_critical_section_enter();
+
+    if (!init) {
+        init_local();
+        init = true;
+    }
+
+    timestamp_t current = lp_ticker_read();
+    if (pending) {
+        // Check if pending should be cleared
+        if (((current - last_set_interrupt) & mask) >= min_delta) {
+            pending = false;
+        }
+    }
+
+    if (pending || timeout_pending) {
+        next = timestamp;
+        last_request = current;
+        if (!timeout_pending) {
+            timeout->attach_us(set_interrupt_later, reschedule_us);
+            timeout_pending = true;
+        }
+    } else {
+        // Schedule immediately if nothing is pending
+        set_interrupt_safe(current, timestamp);
+        last_set_interrupt = lp_ticker_read();
+        pending = true;
+    }
+
+    core_util_critical_section_exit();
+}
+
+#endif