Vincent Angelino
/
ES305_Lab3
a
main.cpp
- Committer:
- Vincent9
- Date:
- 2018-12-05
- Revision:
- 1:da8fb81386ab
- Parent:
- 0:980f29af9da6
File content as of revision 1:da8fb81386ab:
// Include necessary libraries #include "mbed.h" #include "mbedWSEsbc.h" #define PI (3.14159) // Declare objects (if necessary) Ticker Controller; // declare Ticker object named "Controller" DigitalOut myled(LED1); // LED, flash lights for debugging // variables for data handling and storage float TotalTime; // Total run time float Time; // Current elapsed time float Ts = 0.0083; // Control update period (seconds) (100 Hz equivalent) float Tstrm = 0.01; // Data streaming period (seconds) (50 Hz equivalent) float usrDC; // uaser-specified duty cycle float ang,angp,speed; // variables for approximating speed from encoder measurements float dc; // duty cycle applied to motor long enc1; // encoder variable float lowDC; float dspd; // desired speed (received from serial port) float spdErr; // speed error (rad/s) float Kp; // proportional control gain // Function definition Prototypes (declarations) void ctrCode(); // declare that a separate (other than main) function named "ctrCode" exists void twoStepCode(); void pCtrlCode(); // proportional controller // Enter main function int main () { // Initializes mbed to access functionality of encoder, A/D, driver, etc. chipsets // Input is baud rate for PC communication mbedWSEsbcInit(115200); // also initializes timer object t mot_en1.period(0.020); // sets PWM period to 0.02 seconds for best DC motor operation while(1) { // Scan serial port for user input to begin experiment // pc.scanf("%f,%f",&TotalTime,&lowDC); pc.scanf("%f,%f,%f",&TotalTime,&dspd,&Kp); // perform necessary functions to time the experiment Time = 0.0; // reset time variable t.reset(); // reset timer object // Attach the ctrCode function to ticker object specified with period Ts Controller.attach(&pCtrlCode,Ts); t.start(); // start measuring elapsed time // perform operations while the elapsed time is less than the desired total time while(Time <= TotalTime) { // read current elapsed time Time = t.read(); // send data over serial port pc.printf("%f,%f,%f\n",Time,speed,dc); wait(Tstrm); // print data at approximately 50 Hz } // end while(Time<=Ttime) Controller.detach(); // detach ticker to turn off controller // Turn motor off at end of experiment mot_control(1,0.0); }// end while(1) }// end main // Additional function definitions void ctrCode() // function to attach to ticker { myled = !myled; // toggle LED 2 to indicate control update // Read encoder enc1 = LS7366_read_counter(1); // input is the encoder channel // Convert from counts to radians ang = 2.0*PI*enc1/6400.0; // Estimate speed speed = (ang-angp)/Ts; // Age variables angp = ang; // compute duty cycle for motor (will be changed later!) dc = usrDC; // user-specified duty cycle // motor control mot_control(1,dc); // first input is the motor channel, second is duty cycle } // end ctrCode() void twoStepCode() // function to attach to ticker { myled = !myled; // toggle LED 2 to indicate control update // Read encoder enc1 = LS7366_read_counter(1); // input is the encoder channel // Convert from counts to radians ang = 2.0*PI*enc1/6400.0; // Estimate speed speed = (ang-angp)/Ts; // Age variables angp = ang; // compute duty cycle for motor over two step inputs if(Time<0.1) { dc = 0.0; } else if(Time<0.55) { dc = lowDC; // low duty cycle } else { dc = 0.10; } // motor control mot_control(1,dc); // first input is the motor channel, second is duty cycle } // end twoStepCode() void pCtrlCode() // function to attach to ticker { myled = !myled; // toggle LED 2 to indicate control update // Read encoder enc1 = LS7366_read_counter(1); // input is the encoder channel // Convert from counts to radians ang = 2.0*PI*enc1/6400.0; // Estimate speed speed = (ang-angp)/Ts; // Age variables angp = ang; // compute error spdErr = dspd-speed; // compute duty cycle for motor over two step inputs if(Time<0.1) { dc = 0.0; } else { dc = Kp*(spdErr); } // enforce duty cycle saturation if(dc>1.0) { dc = 1.0; } else if(dc<-1.0) { dc = -1.0; } // motor control mot_control(1,dc); // first input is the motor channel, second is duty cycle } // end