Timothy Daw
mpu6050
Diff: mbed_config.h
- Revision:
- 0:68bfb6ebd7a1
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed_config.h Fri Feb 28 18:48:19 2020 +0000 @@ -0,0 +1,57 @@ +/* + * mbed SDK + * Copyright (c) 2017 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +// Automatically generated configuration file. +// DO NOT EDIT, content will be overwritten. + +#ifndef __MBED_CONFIG_DATA__ +#define __MBED_CONFIG_DATA__ + +// Configuration parameters +#define CLOCK_SOURCE USE_PLL_HSE_EXTC|USE_PLL_HSI // set by target:NUCLEO_F303RE +#define LPTICKER_DELAY_TICKS 1 // set by target:FAMILY_STM32 +#define MBED_CONF_PLATFORM_CRASH_CAPTURE_ENABLED 0 // set by library:platform +#define MBED_CONF_PLATFORM_CTHUNK_COUNT_MAX 8 // set by library:platform +#define MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE 9600 // set by library:platform +#define MBED_CONF_PLATFORM_ERROR_ALL_THREADS_INFO 0 // set by library:platform +#define MBED_CONF_PLATFORM_ERROR_DECODE_HTTP_URL_STR "\nFor more info, visit: https://armmbed.github.io/mbedos-error/?error=0x%08X" // set by library:platform +#define MBED_CONF_PLATFORM_ERROR_FILENAME_CAPTURE_ENABLED 0 // set by library:platform +#define MBED_CONF_PLATFORM_ERROR_HIST_ENABLED 0 // set by library:platform +#define MBED_CONF_PLATFORM_ERROR_HIST_SIZE 4 // set by library:platform +#define MBED_CONF_PLATFORM_ERROR_REBOOT_MAX 1 // set by library:platform +#define MBED_CONF_PLATFORM_FATAL_ERROR_AUTO_REBOOT_ENABLED 0 // set by library:platform +#define MBED_CONF_PLATFORM_FORCE_NON_COPYABLE_ERROR 0 // set by library:platform +#define MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN 16 // set by library:platform +#define MBED_CONF_PLATFORM_POLL_USE_LOWPOWER_TIMER 0 // set by library:platform +#define MBED_CONF_PLATFORM_STDIO_BAUD_RATE 9600 // set by library:platform +#define MBED_CONF_PLATFORM_STDIO_BUFFERED_SERIAL 0 // set by library:platform +#define MBED_CONF_PLATFORM_STDIO_CONVERT_NEWLINES 0 // set by library:platform +#define MBED_CONF_PLATFORM_STDIO_CONVERT_TTY_NEWLINES 0 // set by library:platform +#define MBED_CONF_PLATFORM_STDIO_FLUSH_AT_EXIT 1 // set by library:platform +#define MBED_CONF_PLATFORM_USE_MPU 1 // set by library:platform +#define MBED_CONF_TARGET_BOOT_STACK_SIZE 0x1000 // set by target:Target +#define MBED_CONF_TARGET_CONSOLE_UART 1 // set by target:Target +#define MBED_CONF_TARGET_DEEP_SLEEP_LATENCY 4 // set by target:FAMILY_STM32 +#define MBED_CONF_TARGET_INIT_US_TICKER_AT_BOOT 1 // set by target:FAMILY_STM32 +#define MBED_CONF_TARGET_LPTICKER_LPTIM_CLOCK 1 // set by target:FAMILY_STM32 +#define MBED_CONF_TARGET_LPUART_CLOCK_SOURCE USE_LPUART_CLK_LSE|USE_LPUART_CLK_PCLK1 // set by target:FAMILY_STM32 +#define MBED_CONF_TARGET_LSE_AVAILABLE 1 // set by target:FAMILY_STM32 +#define MBED_CONF_TARGET_MPU_ROM_END 0x0fffffff // set by target:Target +#define MBED_CONF_TARGET_TICKLESS_FROM_US_TICKER 0 // set by target:Target +#define MBED_CONF_TARGET_XIP_ENABLE 0 // set by target:Target + +#endif