Diff: main.cpp

Revision:

2:3d64970eeb96

Parent:

1:6926cb0de2b0

Child:

3:996d0d74fb11

diff -r 6926cb0de2b0 -r 3d64970eeb96 main.cpp
--- a/main.cpp	Fri Oct 20 05:06:15 2017 +0000
+++ b/main.cpp	Wed Oct 24 06:03:27 2018 +0000
@@ -1,53 +1,53 @@
 #include "mbed.h"
 
- 
- #include "hal/i2c_api.h"
- #include "platform/SingletonPtr.h"
- #include "platform/PlatformMutex.h"
- //#include "platform/NonCopyable.h"
- 
- #if DEVICE_I2C_ASYNCH
- #include "platform/CThunk.h"
- #include "hal/dma_api.h"
- #include "platform/FunctionPointer.h"
- #endif 
-// Read temperature from LM75BD
+DigitalOut led_red(LED_RED);
+InterruptIn sw2(SW2);
+I2C i2c( PTB1, PTB0);
 
-I2C Master(PC_9, PA_8);
-Serial pc(USBTX,USBRX); 
-const int addr = 0xA0;
+Serial serialPort( PTE0, PTE1);
+
+int Right_ADDR = 0x14<<1;
+int Left_ADDR  = 0x15<<1;   
 
-int main() {
-    char cmd[2];
-    char buffer[20];
-    char slave_buffer[20];
-    char msg[] = "Hi 0xA0";
-    char msg_all[] = "Slave!";
-    while (1) {
-                
-        if(pc.readable()) {
-            pc.gets(buffer, sizeof(buffer));
-            pc.printf("buffer : %s\n",buffer);
-            if(buffer[0]!='\0'|| buffer[0]!='\r'|| buffer[0]!='\n'||buffer!='\0'){
-                int i=atoi(buffer);
-                switch (i) {
-                    case I2C::MasterGeneralCall:
-                        //write(int address, const char *data, int length, bool repeated = false);
-                        Master.write(addr, msg_all, strlen(msg_all) + 1, false); // Includes null char
-                        printf("write msg_all G: %s\n", msg_all);
-                    break;
-                    case I2C::MasterWrite:
-                        Master.write(addr, msg, strlen(msg) + 1, false);
-                        printf("write msg to A: %s\n", msg);
-                    break;
-                    case I2C::MasterRead:
-                        Master.read(addr,slave_buffer, 20);
-                        printf("Read A: %s\n", slave_buffer);
-                    break;
-                }
-            
-            }
-            for(int i = 0; i < 10; i++) buffer[i] = 0;    // Clear buffer
-        }
+void sw2_release(void)
+{
+    led_red = !led_red;
+    serialPort.printf("On-board button SW2 was released.\n");
+}
+void Driving_Right(void)
+{
+    i2c.start();
+    i2c.write(Right_ADDR);
+    i2c.write(0);
+    i2c.write(0xe2);
+    i2c.write(0);       
+    i2c.stop();
+}
+void Driving_Left(void)
+{
+    i2c.start();
+    i2c.write(Left_ADDR);
+    i2c.write(0);
+    i2c.write(0xe2);
+    i2c.write(0);       
+    i2c.stop();
+}
+
+int main()
+{
+
+    sw2.rise(&sw2_release);
+    serialPort.baud(115200);
+    serialPort.printf("WPI Serial Port Started\n");
+        
+    i2c.frequency(100000);    
+    wait_ms(100);
+    
+    Driving_Right();
+    wait_ms(100);
+    Driving_Left();
+    
+    while (true) {
+
     }
-}
\ No newline at end of file
+}