Bob Seque
mbed library sources. Supersedes mbed-src.
Fork of
mbed-dev
by 
mbed official
Revision 25:ac5b0a371348, committed 2015-11-20
- Comitter:
- mbed_official
- Date:
- Fri Nov 20 10:00:12 2015 +0000
- Parent:
- 24:2ae3e17e7432
- Child:
- 26:a457b7fe77eb
- Commit message:
- Synchronized with git revision a4b777d8b25f9146e77396273dc9631c38583eb9
Full URL: https://github.com/mbedmicro/mbed/commit/a4b777d8b25f9146e77396273dc9631c38583eb9/
Added new Nucleo target - F410RB
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/TOOLCHAIN_ARM_MICRO/startup_stm32f410rx.S Fri Nov 20 10:00:12 2015 +0000 @@ -0,0 +1,376 @@ +;******************** (C) COPYRIGHT 2015 STMicroelectronics ******************** +;* File Name : startup_stm32f410rx.s +;* Author : MCD Application Team +;* Version : V2.4.1 +;* Date : 09-October-2015 +;* Description : STM32F410Rx devices vector table for MDK-ARM_MICRO toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 + EXPORT __initial_sp + +Stack_Mem SPACE Stack_Size +__initial_sp EQU 0x20008000 ; Top of RAM + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 + EXPORT __heap_base + EXPORT __heap_limit + +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit EQU (__initial_sp - Stack_Size) + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD 0 ; Reserved + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD RNG_IRQHandler ; RNG + DCD FPU_IRQHandler ; FPU + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI5_IRQHandler ; SPI5 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD FMPI2C1_EV_IRQHandler ; FMPI2C1 Event + DCD FMPI2C1_ER_IRQHandler ; FMPI2C1 Error + DCD LPTIM1_IRQHandler ; LP TIM1 + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Stream0_IRQHandler [WEAK] + EXPORT DMA1_Stream1_IRQHandler [WEAK] + EXPORT DMA1_Stream2_IRQHandler [WEAK] + EXPORT DMA1_Stream3_IRQHandler [WEAK] + EXPORT DMA1_Stream4_IRQHandler [WEAK] + EXPORT DMA1_Stream5_IRQHandler [WEAK] + EXPORT DMA1_Stream6_IRQHandler [WEAK] + EXPORT ADC_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT DMA1_Stream7_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT DMA2_Stream0_IRQHandler [WEAK] + EXPORT DMA2_Stream1_IRQHandler [WEAK] + EXPORT DMA2_Stream2_IRQHandler [WEAK] + EXPORT DMA2_Stream3_IRQHandler [WEAK] + EXPORT DMA2_Stream4_IRQHandler [WEAK] + EXPORT DMA2_Stream4_IRQHandler [WEAK] + EXPORT DMA2_Stream5_IRQHandler [WEAK] + EXPORT DMA2_Stream6_IRQHandler [WEAK] + EXPORT DMA2_Stream7_IRQHandler [WEAK] + EXPORT USART6_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT SPI5_IRQHandler [WEAK] + EXPORT FMPI2C1_EV_IRQHandler [WEAK] + EXPORT FMPI2C1_ER_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Stream0_IRQHandler +DMA1_Stream1_IRQHandler +DMA1_Stream2_IRQHandler +DMA1_Stream3_IRQHandler +DMA1_Stream4_IRQHandler +DMA1_Stream5_IRQHandler +DMA1_Stream6_IRQHandler +ADC_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM9_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_TIM11_IRQHandler +TIM1_CC_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +DMA1_Stream7_IRQHandler +TIM5_IRQHandler +TIM6_DAC_IRQHandler +DMA2_Stream0_IRQHandler +DMA2_Stream1_IRQHandler +DMA2_Stream2_IRQHandler +DMA2_Stream3_IRQHandler +DMA2_Stream4_IRQHandler +DMA2_Stream5_IRQHandler +DMA2_Stream6_IRQHandler +DMA2_Stream7_IRQHandler +USART6_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +SPI5_IRQHandler +FMPI2C1_EV_IRQHandler +FMPI2C1_ER_IRQHandler +LPTIM1_IRQHandler + + B . + + ENDP + + ALIGN + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/TOOLCHAIN_ARM_MICRO/stm32f410rb.sct Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F410RB: 128 KB FLASH (0x20000) + 32 KB SRAM (0x8000)
+LR_IROM1 0x08000000 0x20000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x20000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 112 vectors = 448 bytes (0x1C0) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x1C0) (0x8000-0x1C0) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/TOOLCHAIN_ARM_MICRO/sys.cpp Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rt_misc.h>
+#include <stdint.h>
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/TOOLCHAIN_ARM_STD/startup_stm32f410rx.S Fri Nov 20 10:00:12 2015 +0000 @@ -0,0 +1,350 @@ +;******************** (C) COPYRIGHT 2015 STMicroelectronics ******************** +;* File Name : startup_stm32f410rx.s +;* Author : MCD Application Team +;* Version : V2.4.1 +;* Date : 09-October-2015 +;* Description : STM32F410Rx devices vector table for MDK-ARM_STD toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + + +__initial_sp EQU 0x20008000 ; Top of RAM + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD 0 ; Reserved + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD RNG_IRQHandler ; RNG + DCD FPU_IRQHandler ; FPU + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI5_IRQHandler ; SPI5 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD FMPI2C1_EV_IRQHandler ; FMPI2C1 Event + DCD FMPI2C1_ER_IRQHandler ; FMPI2C1 Error + DCD LPTIM1_IRQHandler ; LP TIM1 + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Stream0_IRQHandler [WEAK] + EXPORT DMA1_Stream1_IRQHandler [WEAK] + EXPORT DMA1_Stream2_IRQHandler [WEAK] + EXPORT DMA1_Stream3_IRQHandler [WEAK] + EXPORT DMA1_Stream4_IRQHandler [WEAK] + EXPORT DMA1_Stream5_IRQHandler [WEAK] + EXPORT DMA1_Stream6_IRQHandler [WEAK] + EXPORT ADC_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT DMA1_Stream7_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT DMA2_Stream0_IRQHandler [WEAK] + EXPORT DMA2_Stream1_IRQHandler [WEAK] + EXPORT DMA2_Stream2_IRQHandler [WEAK] + EXPORT DMA2_Stream3_IRQHandler [WEAK] + EXPORT DMA2_Stream4_IRQHandler [WEAK] + EXPORT DMA2_Stream4_IRQHandler [WEAK] + EXPORT DMA2_Stream5_IRQHandler [WEAK] + EXPORT DMA2_Stream6_IRQHandler [WEAK] + EXPORT DMA2_Stream7_IRQHandler [WEAK] + EXPORT USART6_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT SPI5_IRQHandler [WEAK] + EXPORT FMPI2C1_EV_IRQHandler [WEAK] + EXPORT FMPI2C1_ER_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Stream0_IRQHandler +DMA1_Stream1_IRQHandler +DMA1_Stream2_IRQHandler +DMA1_Stream3_IRQHandler +DMA1_Stream4_IRQHandler +DMA1_Stream5_IRQHandler +DMA1_Stream6_IRQHandler +ADC_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM9_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_TIM11_IRQHandler +TIM1_CC_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +DMA1_Stream7_IRQHandler +TIM5_IRQHandler +TIM6_DAC_IRQHandler +DMA2_Stream0_IRQHandler +DMA2_Stream1_IRQHandler +DMA2_Stream2_IRQHandler +DMA2_Stream3_IRQHandler +DMA2_Stream4_IRQHandler +DMA2_Stream5_IRQHandler +DMA2_Stream6_IRQHandler +DMA2_Stream7_IRQHandler +USART6_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +SPI5_IRQHandler +FMPI2C1_EV_IRQHandler +FMPI2C1_ER_IRQHandler +LPTIM1_IRQHandler + + B . + + ENDP + + ALIGN + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/TOOLCHAIN_ARM_STD/stm32f410rb.sct Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F410RB: 128 KB FLASH (0x20000) + 32 KB SRAM (0x8000)
+LR_IROM1 0x08000000 0x20000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x20000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 112 vectors = 448 bytes (0x1C0) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x1C0) (0x8000-0x1C0) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/TOOLCHAIN_ARM_STD/sys.cpp Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rt_misc.h>
+#include <stdint.h>
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/TOOLCHAIN_GCC_ARM/STM32F410RB.ld Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K
+ RAM (rwx) : ORIGIN = 0x200001C8, LENGTH = 32k - 0x1C8
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/TOOLCHAIN_GCC_ARM/startup_stm32f410rx.s Fri Nov 20 10:00:12 2015 +0000 @@ -0,0 +1,454 @@ +/** + ****************************************************************************** + * @file startup_stm32f410rx.s + * @author MCD Application Team + * @version V2.4.1 + * @date 09-October-2015 + * @brief STM32F410Rx Devices vector table for GCC based toolchains. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + //bl __libc_init_array +/* Call the application's entry point.*/ + //bl main + // Calling the crt0 'cold-start' entry point. There __libc_init_array is called + // and when existing hardware_init_hook() and software_init_hook() before + // starting main(). software_init_hook() is available and has to be called due + // to initializsation when using rtos. + bl _start + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_IRQHandler /* TIM1 Update */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word 0 /* Reserved */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word TIM5_IRQHandler /* TIM5 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC */ + .word 0 /* Reserved */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word RNG_IRQHandler /* RNG */ + .word FPU_IRQHandler /* FPU */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word SPI5_IRQHandler /* SPI5 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word FMPI2C1_EV_IRQHandler /* FMPI2C1 Event */ + .word FMPI2C1_ER_IRQHandler /* FMPI2C1 Error */ + .word LPTIM1_IRQHandler /* LP TIM1 */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_IRQHandler + .thumb_set TIM1_UP_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak SPI5_IRQHandler + .thumb_set SPI5_IRQHandler,Default_Handler + + .weak FMPI2C1_EV_IRQHandler + .thumb_set FMPI2C1_EV_IRQHandler,Default_Handler + + .weak FMPI2C1_ER_IRQHandler + .thumb_set FMPI2C1_ER_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/TOOLCHAIN_IAR/startup_stm32f410rx.s Fri Nov 20 10:00:12 2015 +0000 @@ -0,0 +1,510 @@ +;/******************** (C) COPYRIGHT 2015 STMicroelectronics ******************** +;* File Name : startup_stm32f410rx.s +;* Author : MCD Application Team +;* Version : V2.4.1 +;* Date : 09-October-2015 +;* Description : STM32F410Rx devices vector table for EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == _iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Configure the system clock +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************** +;* +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD 0 ; Reserved + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD RNG_IRQHandler ; RNG + DCD FPU_IRQHandler ; FPU + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI5_IRQHandler ; SPI5 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD FMPI2C1_EV_IRQHandler ; FMPI2C1 Event + DCD FMPI2C1_ER_IRQHandler ; FMPI2C1 Error + DCD LPTIM1_IRQHandler ; LP TIM1 + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:REORDER:NOROOT(2) +Reset_Handler + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +PVD_IRQHandler + B PVD_IRQHandler + + PUBWEAK TAMP_STAMP_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TAMP_STAMP_IRQHandler + B TAMP_STAMP_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Stream0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Stream0_IRQHandler + B DMA1_Stream0_IRQHandler + + PUBWEAK DMA1_Stream1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Stream1_IRQHandler + B DMA1_Stream1_IRQHandler + + PUBWEAK DMA1_Stream2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Stream2_IRQHandler + B DMA1_Stream2_IRQHandler + + PUBWEAK DMA1_Stream3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Stream3_IRQHandler + B DMA1_Stream3_IRQHandler + + PUBWEAK DMA1_Stream4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Stream4_IRQHandler + B DMA1_Stream4_IRQHandler + + PUBWEAK DMA1_Stream5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Stream5_IRQHandler + B DMA1_Stream5_IRQHandler + + PUBWEAK DMA1_Stream6_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Stream6_IRQHandler + B DMA1_Stream6_IRQHandler + + PUBWEAK ADC_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ADC_IRQHandler + B ADC_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM1_BRK_TIM9_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM1_BRK_TIM9_IRQHandler + B TIM1_BRK_TIM9_IRQHandler + + PUBWEAK TIM1_UP_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM1_UP_IRQHandler + B TIM1_UP_IRQHandler + + PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM1_TRG_COM_TIM11_IRQHandler + B TIM1_TRG_COM_TIM11_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK I2C2_EV_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +I2C2_EV_IRQHandler + B I2C2_EV_IRQHandler + + PUBWEAK I2C2_ER_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +I2C2_ER_IRQHandler + B I2C2_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +USART2_IRQHandler + B USART2_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK DMA1_Stream7_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Stream7_IRQHandler + B DMA1_Stream7_IRQHandler + + PUBWEAK TIM5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM5_IRQHandler + B TIM5_IRQHandler + + PUBWEAK TIM6_DAC_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM6_DAC_IRQHandler + B TIM6_DAC_IRQHandler + + PUBWEAK DMA2_Stream0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Stream0_IRQHandler + B DMA2_Stream0_IRQHandler + + PUBWEAK DMA2_Stream1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Stream1_IRQHandler + B DMA2_Stream1_IRQHandler + + PUBWEAK DMA2_Stream2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Stream2_IRQHandler + B DMA2_Stream2_IRQHandler + + PUBWEAK DMA2_Stream3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Stream3_IRQHandler + B DMA2_Stream3_IRQHandler + + PUBWEAK DMA2_Stream4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Stream4_IRQHandler + B DMA2_Stream4_IRQHandler + + PUBWEAK DMA2_Stream5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Stream5_IRQHandler + B DMA2_Stream5_IRQHandler + + PUBWEAK DMA2_Stream6_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Stream6_IRQHandler + B DMA2_Stream6_IRQHandler + + PUBWEAK DMA2_Stream7_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Stream7_IRQHandler + B DMA2_Stream7_IRQHandler + + PUBWEAK USART6_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +USART6_IRQHandler + B USART6_IRQHandler + + PUBWEAK RNG_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +RNG_IRQHandler + B RNG_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +FPU_IRQHandler + B FPU_IRQHandler + + PUBWEAK SPI5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +SPI5_IRQHandler + B SPI5_IRQHandler + + PUBWEAK FMPI2C1_EV_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +FMPI2C1_EV_IRQHandler + B FMPI2C1_EV_IRQHandler + + PUBWEAK FMPI2C1_ER_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +FMPI2C1_ER_IRQHandler + B FMPI2C1_ER_IRQHandler + + PUBWEAK LPTIM1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +LPTIM1_IRQHandler + B LPTIM1_IRQHandler + + END +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/TOOLCHAIN_IAR/stm32f410rx.icf Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,31 @@
+/* [ROM = 128kb = 0x20000] */
+define symbol __intvec_start__ = 0x08000000;
+define symbol __region_ROM_start__ = 0x08000000;
+define symbol __region_ROM_end__ = 0x0801FFFF;
+
+/* [RAM = 32kb = 0x8000] Vector table dynamic copy: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM */
+define symbol __NVIC_start__ = 0x20000000;
+define symbol __NVIC_end__ = 0x200001C7; /* Aligned on 8 bytes */
+define symbol __region_RAM_start__ = 0x200001C8;
+define symbol __region_RAM_end__ = 0x20007FFF;
+
+/* Memory regions */
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
+define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
+
+/* Stack and Heap */
+/*Heap 1/4 of ram and stack 1/8*/
+define symbol __size_cstack__ = 0x1000;
+define symbol __size_heap__ = 0x2000;
+define block CSTACK with alignment = 8, size = __size_cstack__ { };
+define block HEAP with alignment = 8, size = __size_heap__ { };
+define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+
+initialize by copy with packing = zeros { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite, block STACKHEAP };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/cmsis.h Fri Nov 20 10:00:12 2015 +0000 @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32f4xx.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/cmsis_nvic.c Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "cmsis_nvic.h"
+
+#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM
+#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) {
+ uint32_t *vectors = (uint32_t *)SCB->VTOR;
+ uint32_t i;
+
+ // Copy and switch to dynamic vectors if the first time called
+ if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) {
+ uint32_t *old_vectors = vectors;
+ vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
+ for (i=0; i<NVIC_NUM_VECTORS; i++) {
+ vectors[i] = old_vectors[i];
+ }
+ SCB->VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
+ }
+ vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+ uint32_t *vectors = (uint32_t*)SCB->VTOR;
+ return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/cmsis_nvic.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// STM32F411RE
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 98 vectors = 392 bytes from 0x40 to 0x1C8
+// Total: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM
+#define NVIC_NUM_VECTORS 114
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/hal_tick.c Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,122 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.c
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#include "hal_tick.h"
+
+TIM_HandleTypeDef TimMasterHandle;
+uint32_t PreviousVal = 0;
+
+void us_ticker_irq_handler(void);
+
+void timer_irq_handler(void) {
+ // Channel 1 for mbed timeout
+ if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC1) == SET) {
+ us_ticker_irq_handler();
+ }
+
+ // Channel 2 for HAL tick
+ if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC2) == SET) {
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2);
+ uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle);
+ if ((val - PreviousVal) >= HAL_TICK_DELAY) {
+ // Increment HAL variable
+ HAL_IncTick();
+ // Prepare next interrupt
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY);
+ PreviousVal = val;
+#if 0 // For DEBUG only
+ HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6);
+#endif
+ }
+ }
+}
+
+// Reconfigure the HAL tick using a standard timer instead of systick.
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) {
+ // Enable timer clock
+ TIM_MST_RCC;
+
+ // Reset timer
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+
+ // Update the SystemCoreClock variable
+ SystemCoreClockUpdate();
+
+ // Configure time base
+ TimMasterHandle.Instance = TIM_MST;
+ TimMasterHandle.Init.Period = 0xFFFFFFFF;
+ TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
+ TimMasterHandle.Init.ClockDivision = 0;
+ TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+ TimMasterHandle.Init.RepetitionCounter = 0;
+ HAL_TIM_OC_Init(&TimMasterHandle);
+
+ NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler);
+ NVIC_EnableIRQ(TIM_MST_IRQ);
+
+ // Channel 1 for mbed timeout
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1);
+
+ // Channel 2 for HAL tick
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2);
+ PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle);
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY);
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+
+#if 0 // For DEBUG only
+ __GPIOB_CLK_ENABLE();
+ GPIO_InitTypeDef GPIO_InitStruct;
+ GPIO_InitStruct.Pin = GPIO_PIN_6;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+#endif
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/hal_tick.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f4xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM5
+#define TIM_MST_IRQ TIM5_IRQn
+#define TIM_MST_RCC __TIM5_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM5_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/stm32f410rx.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,3975 @@
+/**
+ ******************************************************************************
+ * @file stm32f410rx.h
+ * @author MCD Application Team
+ * @version V2.4.1
+ * @date 09-October-2015
+ * @brief CMSIS STM32F410Rx Device Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripherals registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f410xx
+ * @{
+ */
+
+#ifndef __STM32F410xx_H
+#define __STM32F410xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001 /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1 /*!< STM32F4XX provides an MPU */
+#define __NVIC_PRIO_BITS 4 /*!< STM32F4XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< FPU present */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F4XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1 global Interrupts */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global Interrupt and DAC Global Interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ RNG_IRQn = 80, /*!< RNG global Interrupt */
+ FPU_IRQn = 81, /*!< FPU global interrupt */
+ SPI5_IRQn = 85, /*!< SPI5 global Interrupt */
+ FMPI2C1_EV_IRQn = 95, /*!< FMPI2C1 Event Interrupt */
+ FMPI2C1_ER_IRQn = 96, /*!< FMPI2C1 Error Interrupt */
+ LPTIM1_IRQn = 97 /*!< LPTIM1 interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f4xx.h"
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */
+ __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */
+} FLASH_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED; /*!< Reserved, 0x18 */
+ uint32_t CFGR2; /*!< Reserved, 0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x24-0x28 */
+ __IO uint32_t CFGR; /*!< SYSCFG Configuration register, Address offset: 0x2C */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+ __IO uint32_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */
+} I2C_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< FMPI2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< FMPI2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< FMPI2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< FMPI2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< FMPI2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< FMPI2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< FMPI2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< FMPI2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< FMPI2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< FMPI2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< FMPI2C Transmit data register, Address offset: 0x28 */
+} FMPI2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ uint32_t RESERVED0[3]; /*!< Reserved, 0x14-0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ uint32_t RESERVED2[3]; /*!< Reserved, 0x34-0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ uint32_t RESERVED4[3]; /*!< Reserved, 0x54-0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ uint32_t RESERVED7[2]; /*!< Reserved, 0x84-0x88 */
+ __IO uint32_t DCKCFGR; /*!< RCC Dedicated Clocks configuration register, Address offset: 0x8C */
+ __IO uint32_t CKGATENR; /*!< RCC Clocks Gated ENable Register, Address offset: 0x90 */
+ __IO uint32_t DCKCFGR2; /*!< RCC Dedicated Clocks configuration register 2, Address offset: 0x94 */
+
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+
+/**
+ * @brief RNG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */
+ __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */
+} RNG_TypeDef;
+
+
+/**
+ * @brief LPTIMER
+ */
+typedef struct
+{
+ __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */
+ __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */
+ __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */
+ __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */
+ __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */
+ __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */
+ __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */
+ __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */
+} LPTIM_TypeDef;
+
+/**
+ * @brief Peripheral_memory_map
+ */
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH(up to 1 MB) base address in the alias region */
+#define SRAM1_BASE ((uint32_t)0x20000000) /*!< SRAM1(32 KB) base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+#define SRAM1_BB_BASE ((uint32_t)0x22000000) /*!< SRAM1(32 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+#define FLASH_END ((uint32_t)0x0801FFFF) /*!< FLASH end address */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000)
+
+/*!< APB1 peripherals */
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x1000)
+#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000)
+#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800)
+#define FMPI2C1_BASE (APB1PERIPH_BASE + 0x6000)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000)
+#define DAC_BASE (APB1PERIPH_BASE + 0x7400)
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000)
+#define ADC_BASE (APB2PERIPH_BASE + 0x2300)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800)
+#define SPI5_BASE (APB2PERIPH_BASE + 0x5000)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8)
+#define RNG_BASE (PERIPH_BASE + 0x80000)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE ((uint32_t )0xE0042000)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define FMPI2C1 ((FMPI2C_TypeDef *) FMPI2C1_BASE)
+#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define SPI5 ((SPI_TypeDef *) SPI5_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define RNG ((RNG_TypeDef *) RNG_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD ((uint32_t)0x00000001) /*!<Analog watchdog flag */
+#define ADC_SR_EOC ((uint32_t)0x00000002) /*!<End of conversion */
+#define ADC_SR_JEOC ((uint32_t)0x00000004) /*!<Injected channel end of conversion */
+#define ADC_SR_JSTRT ((uint32_t)0x00000008) /*!<Injected channel Start flag */
+#define ADC_SR_STRT ((uint32_t)0x00000010) /*!<Regular channel Start flag */
+#define ADC_SR_OVR ((uint32_t)0x00000020) /*!<Overrun flag */
+
+/******************* Bit definition for ADC_CR1 register ********************/
+#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!<AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!<Interrupt enable for EOC */
+#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!<AAnalog Watchdog interrupt enable */
+#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!<Interrupt enable for injected channels */
+#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!<Scan mode */
+#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!<Enable the watchdog on a single channel in scan mode */
+#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!<Automatic injected group conversion */
+#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!<Discontinuous mode on regular channels */
+#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!<Discontinuous mode on injected channels */
+#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!<DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!<Analog watchdog enable on injected channels */
+#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!<Analog watchdog enable on regular channels */
+#define ADC_CR1_RES ((uint32_t)0x03000000) /*!<RES[2:0] bits (Resolution) */
+#define ADC_CR1_RES_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_CR1_RES_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_CR1_OVRIE ((uint32_t)0x04000000) /*!<overrun interrupt enable */
+
+/******************* Bit definition for ADC_CR2 register ********************/
+#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!<A/D Converter ON / OFF */
+#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!<Continuous Conversion */
+#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!<Direct Memory access mode */
+#define ADC_CR2_DDS ((uint32_t)0x00000200) /*!<DMA disable selection (Single ADC) */
+#define ADC_CR2_EOCS ((uint32_t)0x00000400) /*!<End of conversion selection */
+#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!<Data Alignment */
+#define ADC_CR2_JEXTSEL ((uint32_t)0x000F0000) /*!<JEXTSEL[3:0] bits (External event select for injected group) */
+#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define ADC_CR2_JEXTSEL_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define ADC_CR2_JEXTEN ((uint32_t)0x00300000) /*!<JEXTEN[1:0] bits (External Trigger Conversion mode for injected channelsp) */
+#define ADC_CR2_JEXTEN_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_CR2_JEXTEN_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_CR2_JSWSTART ((uint32_t)0x00400000) /*!<Start Conversion of injected channels */
+#define ADC_CR2_EXTSEL ((uint32_t)0x0F000000) /*!<EXTSEL[3:0] bits (External Event Select for regular group) */
+#define ADC_CR2_EXTSEL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_CR2_EXTSEL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_CR2_EXTSEL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define ADC_CR2_EXTSEL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define ADC_CR2_EXTEN ((uint32_t)0x30000000) /*!<EXTEN[1:0] bits (External Trigger Conversion mode for regular channelsp) */
+#define ADC_CR2_EXTEN_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define ADC_CR2_EXTEN_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define ADC_CR2_SWSTART ((uint32_t)0x40000000) /*!<Start Conversion of regular channels */
+
+/****************** Bit definition for ADC_SMPR1 register *******************/
+#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!<SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!<SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!<SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!<SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!<SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!<SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!<SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!<SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP18 ((uint32_t)0x07000000) /*!<SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define ADC_SMPR1_SMP18_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP18_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP18_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+
+/****************** Bit definition for ADC_SMPR2 register *******************/
+#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!<SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!<SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!<SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!<SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!<SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!<SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!<SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!<SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!<SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!<SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!<Bit 2 */
+
+/****************** Bit definition for ADC_JOFR1 register *******************/
+#define ADC_JOFR1_JOFFSET1 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 1 */
+
+/****************** Bit definition for ADC_JOFR2 register *******************/
+#define ADC_JOFR2_JOFFSET2 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 2 */
+
+/****************** Bit definition for ADC_JOFR3 register *******************/
+#define ADC_JOFR3_JOFFSET3 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 3 */
+
+/****************** Bit definition for ADC_JOFR4 register *******************/
+#define ADC_JOFR4_JOFFSET4 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 4 */
+
+/******************* Bit definition for ADC_HTR register ********************/
+#define ADC_HTR_HT ((uint32_t)0x0FFF) /*!<Analog watchdog high threshold */
+
+/******************* Bit definition for ADC_LTR register ********************/
+#define ADC_LTR_LT ((uint32_t)0x0FFF) /*!<Analog watchdog low threshold */
+
+/******************* Bit definition for ADC_SQR1 register *******************/
+#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!<SQ13[4:0] bits (13th conversion in regular sequence) */
+#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!<SQ14[4:0] bits (14th conversion in regular sequence) */
+#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!<SQ15[4:0] bits (15th conversion in regular sequence) */
+#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!<SQ16[4:0] bits (16th conversion in regular sequence) */
+#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!<L[3:0] bits (Regular channel sequence length) */
+#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+/******************* Bit definition for ADC_SQR2 register *******************/
+#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!<SQ7[4:0] bits (7th conversion in regular sequence) */
+#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!<SQ8[4:0] bits (8th conversion in regular sequence) */
+#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!<SQ9[4:0] bits (9th conversion in regular sequence) */
+#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!<SQ10[4:0] bits (10th conversion in regular sequence) */
+#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!<SQ11[4:0] bits (11th conversion in regular sequence) */
+#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!<Bit 4 */
+#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!<SQ12[4:0] bits (12th conversion in regular sequence) */
+#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!<Bit 0 */
+#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!<Bit 1 */
+#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!<Bit 2 */
+#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!<Bit 3 */
+#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!<Bit 4 */
+
+/******************* Bit definition for ADC_SQR3 register *******************/
+#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!<SQ1[4:0] bits (1st conversion in regular sequence) */
+#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!<SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!<SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!<SQ4[4:0] bits (4th conversion in regular sequence) */
+#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!<SQ5[4:0] bits (5th conversion in regular sequence) */
+#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!<Bit 4 */
+#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!<SQ6[4:0] bits (6th conversion in regular sequence) */
+#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!<Bit 0 */
+#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!<Bit 1 */
+#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!<Bit 2 */
+#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!<Bit 3 */
+#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!<Bit 4 */
+
+/******************* Bit definition for ADC_JSQR register *******************/
+#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!<JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!<JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!<JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!<JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!<JL[1:0] bits (Injected Sequence length) */
+#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+
+/******************* Bit definition for ADC_JDR1 register *******************/
+#define ADC_JDR1_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR2 register *******************/
+#define ADC_JDR2_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR3 register *******************/
+#define ADC_JDR3_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR4 register *******************/
+#define ADC_JDR4_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!<Regular data */
+#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!<ADC2 data */
+
+/******************* Bit definition for ADC_CSR register ********************/
+#define ADC_CSR_AWD1 ((uint32_t)0x00000001) /*!<ADC1 Analog watchdog flag */
+#define ADC_CSR_EOC1 ((uint32_t)0x00000002) /*!<ADC1 End of conversion */
+#define ADC_CSR_JEOC1 ((uint32_t)0x00000004) /*!<ADC1 Injected channel end of conversion */
+#define ADC_CSR_JSTRT1 ((uint32_t)0x00000008) /*!<ADC1 Injected channel Start flag */
+#define ADC_CSR_STRT1 ((uint32_t)0x00000010) /*!<ADC1 Regular channel Start flag */
+#define ADC_CSR_DOVR1 ((uint32_t)0x00000020) /*!<ADC1 DMA overrun flag */
+#define ADC_CSR_AWD2 ((uint32_t)0x00000100) /*!<ADC2 Analog watchdog flag */
+#define ADC_CSR_EOC2 ((uint32_t)0x00000200) /*!<ADC2 End of conversion */
+#define ADC_CSR_JEOC2 ((uint32_t)0x00000400) /*!<ADC2 Injected channel end of conversion */
+#define ADC_CSR_JSTRT2 ((uint32_t)0x00000800) /*!<ADC2 Injected channel Start flag */
+#define ADC_CSR_STRT2 ((uint32_t)0x00001000) /*!<ADC2 Regular channel Start flag */
+#define ADC_CSR_DOVR2 ((uint32_t)0x00002000) /*!<ADC2 DMA overrun flag */
+#define ADC_CSR_AWD3 ((uint32_t)0x00010000) /*!<ADC3 Analog watchdog flag */
+#define ADC_CSR_EOC3 ((uint32_t)0x00020000) /*!<ADC3 End of conversion */
+#define ADC_CSR_JEOC3 ((uint32_t)0x00040000) /*!<ADC3 Injected channel end of conversion */
+#define ADC_CSR_JSTRT3 ((uint32_t)0x00080000) /*!<ADC3 Injected channel Start flag */
+#define ADC_CSR_STRT3 ((uint32_t)0x00100000) /*!<ADC3 Regular channel Start flag */
+#define ADC_CSR_DOVR3 ((uint32_t)0x00200000) /*!<ADC3 DMA overrun flag */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_MULTI ((uint32_t)0x0000001F) /*!<MULTI[4:0] bits (Multi-ADC mode selection) */
+#define ADC_CCR_MULTI_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_CCR_MULTI_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_CCR_MULTI_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_CCR_MULTI_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_CCR_MULTI_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_CCR_DELAY ((uint32_t)0x00000F00) /*!<DELAY[3:0] bits (Delay between 2 sampling phases) */
+#define ADC_CCR_DELAY_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define ADC_CCR_DELAY_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define ADC_CCR_DELAY_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define ADC_CCR_DELAY_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define ADC_CCR_DDS ((uint32_t)0x00002000) /*!<DMA disable selection (Multi-ADC mode) */
+#define ADC_CCR_DMA ((uint32_t)0x0000C000) /*!<DMA[1:0] bits (Direct Memory Access mode for multimode) */
+#define ADC_CCR_DMA_0 ((uint32_t)0x00004000) /*!<Bit 0 */
+#define ADC_CCR_DMA_1 ((uint32_t)0x00008000) /*!<Bit 1 */
+#define ADC_CCR_ADCPRE ((uint32_t)0x00030000) /*!<ADCPRE[1:0] bits (ADC prescaler) */
+#define ADC_CCR_ADCPRE_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define ADC_CCR_VBATE ((uint32_t)0x00400000) /*!<VBAT Enable */
+#define ADC_CCR_TSVREFE ((uint32_t)0x00800000) /*!<Temperature Sensor and VREFINT Enable */
+
+/******************* Bit definition for ADC_CDR register ********************/
+#define ADC_CDR_DATA1 ((uint32_t)0x0000FFFF) /*!<1st data of a pair of regular conversions */
+#define ADC_CDR_DATA2 ((uint32_t)0xFFFF0000) /*!<2nd data of a pair of regular conversions */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint32_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x01) /*!< RESET bit */
+
+/******************************************************************************/
+/* */
+/* Debug MCU */
+/* */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* DMA Controller */
+/* */
+/******************************************************************************/
+/******************** Bits definition for DMA_SxCR register *****************/
+#define DMA_SxCR_CHSEL ((uint32_t)0x0E000000)
+#define DMA_SxCR_CHSEL_0 ((uint32_t)0x02000000)
+#define DMA_SxCR_CHSEL_1 ((uint32_t)0x04000000)
+#define DMA_SxCR_CHSEL_2 ((uint32_t)0x08000000)
+#define DMA_SxCR_MBURST ((uint32_t)0x01800000)
+#define DMA_SxCR_MBURST_0 ((uint32_t)0x00800000)
+#define DMA_SxCR_MBURST_1 ((uint32_t)0x01000000)
+#define DMA_SxCR_PBURST ((uint32_t)0x00600000)
+#define DMA_SxCR_PBURST_0 ((uint32_t)0x00200000)
+#define DMA_SxCR_PBURST_1 ((uint32_t)0x00400000)
+#define DMA_SxCR_ACK ((uint32_t)0x00100000)
+#define DMA_SxCR_CT ((uint32_t)0x00080000)
+#define DMA_SxCR_DBM ((uint32_t)0x00040000)
+#define DMA_SxCR_PL ((uint32_t)0x00030000)
+#define DMA_SxCR_PL_0 ((uint32_t)0x00010000)
+#define DMA_SxCR_PL_1 ((uint32_t)0x00020000)
+#define DMA_SxCR_PINCOS ((uint32_t)0x00008000)
+#define DMA_SxCR_MSIZE ((uint32_t)0x00006000)
+#define DMA_SxCR_MSIZE_0 ((uint32_t)0x00002000)
+#define DMA_SxCR_MSIZE_1 ((uint32_t)0x00004000)
+#define DMA_SxCR_PSIZE ((uint32_t)0x00001800)
+#define DMA_SxCR_PSIZE_0 ((uint32_t)0x00000800)
+#define DMA_SxCR_PSIZE_1 ((uint32_t)0x00001000)
+#define DMA_SxCR_MINC ((uint32_t)0x00000400)
+#define DMA_SxCR_PINC ((uint32_t)0x00000200)
+#define DMA_SxCR_CIRC ((uint32_t)0x00000100)
+#define DMA_SxCR_DIR ((uint32_t)0x000000C0)
+#define DMA_SxCR_DIR_0 ((uint32_t)0x00000040)
+#define DMA_SxCR_DIR_1 ((uint32_t)0x00000080)
+#define DMA_SxCR_PFCTRL ((uint32_t)0x00000020)
+#define DMA_SxCR_TCIE ((uint32_t)0x00000010)
+#define DMA_SxCR_HTIE ((uint32_t)0x00000008)
+#define DMA_SxCR_TEIE ((uint32_t)0x00000004)
+#define DMA_SxCR_DMEIE ((uint32_t)0x00000002)
+#define DMA_SxCR_EN ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_SxCNDTR register **************/
+#define DMA_SxNDT ((uint32_t)0x0000FFFF)
+#define DMA_SxNDT_0 ((uint32_t)0x00000001)
+#define DMA_SxNDT_1 ((uint32_t)0x00000002)
+#define DMA_SxNDT_2 ((uint32_t)0x00000004)
+#define DMA_SxNDT_3 ((uint32_t)0x00000008)
+#define DMA_SxNDT_4 ((uint32_t)0x00000010)
+#define DMA_SxNDT_5 ((uint32_t)0x00000020)
+#define DMA_SxNDT_6 ((uint32_t)0x00000040)
+#define DMA_SxNDT_7 ((uint32_t)0x00000080)
+#define DMA_SxNDT_8 ((uint32_t)0x00000100)
+#define DMA_SxNDT_9 ((uint32_t)0x00000200)
+#define DMA_SxNDT_10 ((uint32_t)0x00000400)
+#define DMA_SxNDT_11 ((uint32_t)0x00000800)
+#define DMA_SxNDT_12 ((uint32_t)0x00001000)
+#define DMA_SxNDT_13 ((uint32_t)0x00002000)
+#define DMA_SxNDT_14 ((uint32_t)0x00004000)
+#define DMA_SxNDT_15 ((uint32_t)0x00008000)
+
+/******************** Bits definition for DMA_SxFCR register ****************/
+#define DMA_SxFCR_FEIE ((uint32_t)0x00000080)
+#define DMA_SxFCR_FS ((uint32_t)0x00000038)
+#define DMA_SxFCR_FS_0 ((uint32_t)0x00000008)
+#define DMA_SxFCR_FS_1 ((uint32_t)0x00000010)
+#define DMA_SxFCR_FS_2 ((uint32_t)0x00000020)
+#define DMA_SxFCR_DMDIS ((uint32_t)0x00000004)
+#define DMA_SxFCR_FTH ((uint32_t)0x00000003)
+#define DMA_SxFCR_FTH_0 ((uint32_t)0x00000001)
+#define DMA_SxFCR_FTH_1 ((uint32_t)0x00000002)
+
+/******************** Bits definition for DMA_LISR register *****************/
+#define DMA_LISR_TCIF3 ((uint32_t)0x08000000)
+#define DMA_LISR_HTIF3 ((uint32_t)0x04000000)
+#define DMA_LISR_TEIF3 ((uint32_t)0x02000000)
+#define DMA_LISR_DMEIF3 ((uint32_t)0x01000000)
+#define DMA_LISR_FEIF3 ((uint32_t)0x00400000)
+#define DMA_LISR_TCIF2 ((uint32_t)0x00200000)
+#define DMA_LISR_HTIF2 ((uint32_t)0x00100000)
+#define DMA_LISR_TEIF2 ((uint32_t)0x00080000)
+#define DMA_LISR_DMEIF2 ((uint32_t)0x00040000)
+#define DMA_LISR_FEIF2 ((uint32_t)0x00010000)
+#define DMA_LISR_TCIF1 ((uint32_t)0x00000800)
+#define DMA_LISR_HTIF1 ((uint32_t)0x00000400)
+#define DMA_LISR_TEIF1 ((uint32_t)0x00000200)
+#define DMA_LISR_DMEIF1 ((uint32_t)0x00000100)
+#define DMA_LISR_FEIF1 ((uint32_t)0x00000040)
+#define DMA_LISR_TCIF0 ((uint32_t)0x00000020)
+#define DMA_LISR_HTIF0 ((uint32_t)0x00000010)
+#define DMA_LISR_TEIF0 ((uint32_t)0x00000008)
+#define DMA_LISR_DMEIF0 ((uint32_t)0x00000004)
+#define DMA_LISR_FEIF0 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_HISR register *****************/
+#define DMA_HISR_TCIF7 ((uint32_t)0x08000000)
+#define DMA_HISR_HTIF7 ((uint32_t)0x04000000)
+#define DMA_HISR_TEIF7 ((uint32_t)0x02000000)
+#define DMA_HISR_DMEIF7 ((uint32_t)0x01000000)
+#define DMA_HISR_FEIF7 ((uint32_t)0x00400000)
+#define DMA_HISR_TCIF6 ((uint32_t)0x00200000)
+#define DMA_HISR_HTIF6 ((uint32_t)0x00100000)
+#define DMA_HISR_TEIF6 ((uint32_t)0x00080000)
+#define DMA_HISR_DMEIF6 ((uint32_t)0x00040000)
+#define DMA_HISR_FEIF6 ((uint32_t)0x00010000)
+#define DMA_HISR_TCIF5 ((uint32_t)0x00000800)
+#define DMA_HISR_HTIF5 ((uint32_t)0x00000400)
+#define DMA_HISR_TEIF5 ((uint32_t)0x00000200)
+#define DMA_HISR_DMEIF5 ((uint32_t)0x00000100)
+#define DMA_HISR_FEIF5 ((uint32_t)0x00000040)
+#define DMA_HISR_TCIF4 ((uint32_t)0x00000020)
+#define DMA_HISR_HTIF4 ((uint32_t)0x00000010)
+#define DMA_HISR_TEIF4 ((uint32_t)0x00000008)
+#define DMA_HISR_DMEIF4 ((uint32_t)0x00000004)
+#define DMA_HISR_FEIF4 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_LIFCR register ****************/
+#define DMA_LIFCR_CTCIF3 ((uint32_t)0x08000000)
+#define DMA_LIFCR_CHTIF3 ((uint32_t)0x04000000)
+#define DMA_LIFCR_CTEIF3 ((uint32_t)0x02000000)
+#define DMA_LIFCR_CDMEIF3 ((uint32_t)0x01000000)
+#define DMA_LIFCR_CFEIF3 ((uint32_t)0x00400000)
+#define DMA_LIFCR_CTCIF2 ((uint32_t)0x00200000)
+#define DMA_LIFCR_CHTIF2 ((uint32_t)0x00100000)
+#define DMA_LIFCR_CTEIF2 ((uint32_t)0x00080000)
+#define DMA_LIFCR_CDMEIF2 ((uint32_t)0x00040000)
+#define DMA_LIFCR_CFEIF2 ((uint32_t)0x00010000)
+#define DMA_LIFCR_CTCIF1 ((uint32_t)0x00000800)
+#define DMA_LIFCR_CHTIF1 ((uint32_t)0x00000400)
+#define DMA_LIFCR_CTEIF1 ((uint32_t)0x00000200)
+#define DMA_LIFCR_CDMEIF1 ((uint32_t)0x00000100)
+#define DMA_LIFCR_CFEIF1 ((uint32_t)0x00000040)
+#define DMA_LIFCR_CTCIF0 ((uint32_t)0x00000020)
+#define DMA_LIFCR_CHTIF0 ((uint32_t)0x00000010)
+#define DMA_LIFCR_CTEIF0 ((uint32_t)0x00000008)
+#define DMA_LIFCR_CDMEIF0 ((uint32_t)0x00000004)
+#define DMA_LIFCR_CFEIF0 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_HIFCR register ****************/
+#define DMA_HIFCR_CTCIF7 ((uint32_t)0x08000000)
+#define DMA_HIFCR_CHTIF7 ((uint32_t)0x04000000)
+#define DMA_HIFCR_CTEIF7 ((uint32_t)0x02000000)
+#define DMA_HIFCR_CDMEIF7 ((uint32_t)0x01000000)
+#define DMA_HIFCR_CFEIF7 ((uint32_t)0x00400000)
+#define DMA_HIFCR_CTCIF6 ((uint32_t)0x00200000)
+#define DMA_HIFCR_CHTIF6 ((uint32_t)0x00100000)
+#define DMA_HIFCR_CTEIF6 ((uint32_t)0x00080000)
+#define DMA_HIFCR_CDMEIF6 ((uint32_t)0x00040000)
+#define DMA_HIFCR_CFEIF6 ((uint32_t)0x00010000)
+#define DMA_HIFCR_CTCIF5 ((uint32_t)0x00000800)
+#define DMA_HIFCR_CHTIF5 ((uint32_t)0x00000400)
+#define DMA_HIFCR_CTEIF5 ((uint32_t)0x00000200)
+#define DMA_HIFCR_CDMEIF5 ((uint32_t)0x00000100)
+#define DMA_HIFCR_CFEIF5 ((uint32_t)0x00000040)
+#define DMA_HIFCR_CTCIF4 ((uint32_t)0x00000020)
+#define DMA_HIFCR_CHTIF4 ((uint32_t)0x00000010)
+#define DMA_HIFCR_CTEIF4 ((uint32_t)0x00000008)
+#define DMA_HIFCR_CDMEIF4 ((uint32_t)0x00000004)
+#define DMA_HIFCR_CFEIF4 ((uint32_t)0x00000001)
+
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+
+/******************* Bit definition for EXTI_EMR register *******************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+
+/****************** Bit definition for EXTI_RTSR register *******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
+#define EXTI_RTSR_TR23 ((uint32_t)0x00800000) /*!< Rising trigger event configuration bit of line 23 */
+
+/****************** Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
+#define EXTI_FTSR_TR23 ((uint32_t)0x00800000) /*!< Falling trigger event configuration bit of line 23 */
+
+/****************** Bit definition for EXTI_SWIER register ******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
+#define EXTI_SWIER_SWIER23 ((uint32_t)0x00800000) /*!< Software Interrupt on line 23 */
+
+/******************* Bit definition for EXTI_PR register ********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit for line 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit for line 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit for line 22 */
+#define EXTI_PR_PR23 ((uint32_t)0x00800000) /*!< Pending bit for line 23 */
+
+/******************************************************************************/
+/* */
+/* FLASH */
+/* */
+/******************************************************************************/
+/******************* Bits definition for FLASH_ACR register *****************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x0000000F)
+#define FLASH_ACR_LATENCY_0WS ((uint32_t)0x00000000)
+#define FLASH_ACR_LATENCY_1WS ((uint32_t)0x00000001)
+#define FLASH_ACR_LATENCY_2WS ((uint32_t)0x00000002)
+#define FLASH_ACR_LATENCY_3WS ((uint32_t)0x00000003)
+#define FLASH_ACR_LATENCY_4WS ((uint32_t)0x00000004)
+#define FLASH_ACR_LATENCY_5WS ((uint32_t)0x00000005)
+#define FLASH_ACR_LATENCY_6WS ((uint32_t)0x00000006)
+#define FLASH_ACR_LATENCY_7WS ((uint32_t)0x00000007)
+
+#define FLASH_ACR_PRFTEN ((uint32_t)0x00000100)
+#define FLASH_ACR_ICEN ((uint32_t)0x00000200)
+#define FLASH_ACR_DCEN ((uint32_t)0x00000400)
+#define FLASH_ACR_ICRST ((uint32_t)0x00000800)
+#define FLASH_ACR_DCRST ((uint32_t)0x00001000)
+#define FLASH_ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
+#define FLASH_ACR_BYTE2_ADDRESS ((uint32_t)0x40023C03)
+
+/******************* Bits definition for FLASH_SR register ******************/
+#define FLASH_SR_EOP ((uint32_t)0x00000001)
+#define FLASH_SR_SOP ((uint32_t)0x00000002)
+#define FLASH_SR_WRPERR ((uint32_t)0x00000010)
+#define FLASH_SR_PGAERR ((uint32_t)0x00000020)
+#define FLASH_SR_PGPERR ((uint32_t)0x00000040)
+#define FLASH_SR_PGSERR ((uint32_t)0x00000080)
+#define FLASH_SR_BSY ((uint32_t)0x00010000)
+
+/******************* Bits definition for FLASH_CR register ******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001)
+#define FLASH_CR_SER ((uint32_t)0x00000002)
+#define FLASH_CR_MER ((uint32_t)0x00000004)
+#define FLASH_CR_SNB ((uint32_t)0x000000F8)
+#define FLASH_CR_SNB_0 ((uint32_t)0x00000008)
+#define FLASH_CR_SNB_1 ((uint32_t)0x00000010)
+#define FLASH_CR_SNB_2 ((uint32_t)0x00000020)
+#define FLASH_CR_SNB_3 ((uint32_t)0x00000040)
+#define FLASH_CR_SNB_4 ((uint32_t)0x00000080)
+#define FLASH_CR_PSIZE ((uint32_t)0x00000300)
+#define FLASH_CR_PSIZE_0 ((uint32_t)0x00000100)
+#define FLASH_CR_PSIZE_1 ((uint32_t)0x00000200)
+#define FLASH_CR_STRT ((uint32_t)0x00010000)
+#define FLASH_CR_EOPIE ((uint32_t)0x01000000)
+#define FLASH_CR_LOCK ((uint32_t)0x80000000)
+
+/******************* Bits definition for FLASH_OPTCR register ***************/
+#define FLASH_OPTCR_OPTLOCK ((uint32_t)0x00000001)
+#define FLASH_OPTCR_OPTSTRT ((uint32_t)0x00000002)
+#define FLASH_OPTCR_BOR_LEV_0 ((uint32_t)0x00000004)
+#define FLASH_OPTCR_BOR_LEV_1 ((uint32_t)0x00000008)
+#define FLASH_OPTCR_BOR_LEV ((uint32_t)0x0000000C)
+
+#define FLASH_OPTCR_WDG_SW ((uint32_t)0x00000020)
+#define FLASH_OPTCR_nRST_STOP ((uint32_t)0x00000040)
+#define FLASH_OPTCR_nRST_STDBY ((uint32_t)0x00000080)
+#define FLASH_OPTCR_RDP ((uint32_t)0x0000FF00)
+#define FLASH_OPTCR_RDP_0 ((uint32_t)0x00000100)
+#define FLASH_OPTCR_RDP_1 ((uint32_t)0x00000200)
+#define FLASH_OPTCR_RDP_2 ((uint32_t)0x00000400)
+#define FLASH_OPTCR_RDP_3 ((uint32_t)0x00000800)
+#define FLASH_OPTCR_RDP_4 ((uint32_t)0x00001000)
+#define FLASH_OPTCR_RDP_5 ((uint32_t)0x00002000)
+#define FLASH_OPTCR_RDP_6 ((uint32_t)0x00004000)
+#define FLASH_OPTCR_RDP_7 ((uint32_t)0x00008000)
+#define FLASH_OPTCR_nWRP ((uint32_t)0x0FFF0000)
+#define FLASH_OPTCR_nWRP_0 ((uint32_t)0x00010000)
+#define FLASH_OPTCR_nWRP_1 ((uint32_t)0x00020000)
+#define FLASH_OPTCR_nWRP_2 ((uint32_t)0x00040000)
+#define FLASH_OPTCR_nWRP_3 ((uint32_t)0x00080000)
+#define FLASH_OPTCR_nWRP_4 ((uint32_t)0x00100000)
+#define FLASH_OPTCR_nWRP_5 ((uint32_t)0x00200000)
+#define FLASH_OPTCR_nWRP_6 ((uint32_t)0x00400000)
+#define FLASH_OPTCR_nWRP_7 ((uint32_t)0x00800000)
+#define FLASH_OPTCR_nWRP_8 ((uint32_t)0x01000000)
+#define FLASH_OPTCR_nWRP_9 ((uint32_t)0x02000000)
+#define FLASH_OPTCR_nWRP_10 ((uint32_t)0x04000000)
+#define FLASH_OPTCR_nWRP_11 ((uint32_t)0x08000000)
+
+/****************** Bits definition for FLASH_OPTCR1 register ***************/
+#define FLASH_OPTCR1_nWRP ((uint32_t)0x0FFF0000)
+#define FLASH_OPTCR1_nWRP_0 ((uint32_t)0x00010000)
+#define FLASH_OPTCR1_nWRP_1 ((uint32_t)0x00020000)
+#define FLASH_OPTCR1_nWRP_2 ((uint32_t)0x00040000)
+#define FLASH_OPTCR1_nWRP_3 ((uint32_t)0x00080000)
+#define FLASH_OPTCR1_nWRP_4 ((uint32_t)0x00100000)
+#define FLASH_OPTCR1_nWRP_5 ((uint32_t)0x00200000)
+#define FLASH_OPTCR1_nWRP_6 ((uint32_t)0x00400000)
+#define FLASH_OPTCR1_nWRP_7 ((uint32_t)0x00800000)
+#define FLASH_OPTCR1_nWRP_8 ((uint32_t)0x01000000)
+#define FLASH_OPTCR1_nWRP_9 ((uint32_t)0x02000000)
+#define FLASH_OPTCR1_nWRP_10 ((uint32_t)0x04000000)
+#define FLASH_OPTCR1_nWRP_11 ((uint32_t)0x08000000)
+
+/******************************************************************************/
+/* */
+/* General Purpose I/O */
+/* */
+/******************************************************************************/
+/****************** Bits definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_OTYPER register ****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_OSPEEDR register ***************/
+#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_OSPEEDER_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_OSPEEDER_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_OSPEEDER_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_OSPEEDER_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_OSPEEDER_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_OSPEEDER_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_OSPEEDER_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_OSPEEDER_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_OSPEEDER_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_OSPEEDER_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_OSPEEDER_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_OSPEEDER_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_OSPEEDER_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_OSPEEDER_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_OSPEEDER_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_PUPDR register *****************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_IDR register *******************/
+#define GPIO_IDR_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_ODR register *******************/
+#define GPIO_ODR_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_BSRR register ******************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register *********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register ********************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!<Peripheral Enable */
+#define I2C_CR1_SMBUS ((uint32_t)0x00000002) /*!<SMBus Mode */
+#define I2C_CR1_SMBTYPE ((uint32_t)0x00000008) /*!<SMBus Type */
+#define I2C_CR1_ENARP ((uint32_t)0x00000010) /*!<ARP Enable */
+#define I2C_CR1_ENPEC ((uint32_t)0x00000020) /*!<PEC Enable */
+#define I2C_CR1_ENGC ((uint32_t)0x00000040) /*!<General Call Enable */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00000080) /*!<Clock Stretching Disable (Slave mode) */
+#define I2C_CR1_START ((uint32_t)0x00000100) /*!<Start Generation */
+#define I2C_CR1_STOP ((uint32_t)0x00000200) /*!<Stop Generation */
+#define I2C_CR1_ACK ((uint32_t)0x00000400) /*!<Acknowledge Enable */
+#define I2C_CR1_POS ((uint32_t)0x00000800) /*!<Acknowledge/PEC Position (for data reception) */
+#define I2C_CR1_PEC ((uint32_t)0x00001000) /*!<Packet Error Checking */
+#define I2C_CR1_ALERT ((uint32_t)0x00002000) /*!<SMBus Alert */
+#define I2C_CR1_SWRST ((uint32_t)0x00008000) /*!<Software Reset */
+
+/******************* Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_FREQ ((uint32_t)0x0000003F) /*!<FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define I2C_CR2_FREQ_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define I2C_CR2_FREQ_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define I2C_CR2_FREQ_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define I2C_CR2_FREQ_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define I2C_CR2_FREQ_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define I2C_CR2_FREQ_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+
+#define I2C_CR2_ITERREN ((uint32_t)0x00000100) /*!<Error Interrupt Enable */
+#define I2C_CR2_ITEVTEN ((uint32_t)0x00000200) /*!<Event Interrupt Enable */
+#define I2C_CR2_ITBUFEN ((uint32_t)0x00000400) /*!<Buffer Interrupt Enable */
+#define I2C_CR2_DMAEN ((uint32_t)0x00000800) /*!<DMA Requests Enable */
+#define I2C_CR2_LAST ((uint32_t)0x00001000) /*!<DMA Last Transfer */
+
+/******************* Bit definition for I2C_OAR1 register *******************/
+#define I2C_OAR1_ADD1_7 ((uint32_t)0x000000FE) /*!<Interface Address */
+#define I2C_OAR1_ADD8_9 ((uint32_t)0x00000300) /*!<Interface Address */
+
+#define I2C_OAR1_ADD0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define I2C_OAR1_ADD1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define I2C_OAR1_ADD2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define I2C_OAR1_ADD3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define I2C_OAR1_ADD4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define I2C_OAR1_ADD5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define I2C_OAR1_ADD6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define I2C_OAR1_ADD7 ((uint32_t)0x00000080) /*!<Bit 7 */
+#define I2C_OAR1_ADD8 ((uint32_t)0x00000100) /*!<Bit 8 */
+#define I2C_OAR1_ADD9 ((uint32_t)0x00000200) /*!<Bit 9 */
+
+#define I2C_OAR1_ADDMODE ((uint32_t)0x00008000) /*!<Addressing Mode (Slave mode) */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_ENDUAL ((uint32_t)0x00000001) /*!<Dual addressing mode enable */
+#define I2C_OAR2_ADD2 ((uint32_t)0x000000FE) /*!<Interface address */
+
+/******************** Bit definition for I2C_DR register ********************/
+#define I2C_DR_DR ((uint32_t)0x000000FF) /*!<8-bit Data Register */
+
+/******************* Bit definition for I2C_SR1 register ********************/
+#define I2C_SR1_SB ((uint32_t)0x00000001) /*!<Start Bit (Master mode) */
+#define I2C_SR1_ADDR ((uint32_t)0x00000002) /*!<Address sent (master mode)/matched (slave mode) */
+#define I2C_SR1_BTF ((uint32_t)0x00000004) /*!<Byte Transfer Finished */
+#define I2C_SR1_ADD10 ((uint32_t)0x00000008) /*!<10-bit header sent (Master mode) */
+#define I2C_SR1_STOPF ((uint32_t)0x00000010) /*!<Stop detection (Slave mode) */
+#define I2C_SR1_RXNE ((uint32_t)0x00000040) /*!<Data Register not Empty (receivers) */
+#define I2C_SR1_TXE ((uint32_t)0x00000080) /*!<Data Register Empty (transmitters) */
+#define I2C_SR1_BERR ((uint32_t)0x00000100) /*!<Bus Error */
+#define I2C_SR1_ARLO ((uint32_t)0x00000200) /*!<Arbitration Lost (master mode) */
+#define I2C_SR1_AF ((uint32_t)0x00000400) /*!<Acknowledge Failure */
+#define I2C_SR1_OVR ((uint32_t)0x00000800) /*!<Overrun/Underrun */
+#define I2C_SR1_PECERR ((uint32_t)0x00001000) /*!<PEC Error in reception */
+#define I2C_SR1_TIMEOUT ((uint32_t)0x00004000) /*!<Timeout or Tlow Error */
+#define I2C_SR1_SMBALERT ((uint32_t)0x00008000) /*!<SMBus Alert */
+
+/******************* Bit definition for I2C_SR2 register ********************/
+#define I2C_SR2_MSL ((uint32_t)0x00000001) /*!<Master/Slave */
+#define I2C_SR2_BUSY ((uint32_t)0x00000002) /*!<Bus Busy */
+#define I2C_SR2_TRA ((uint32_t)0x00000004) /*!<Transmitter/Receiver */
+#define I2C_SR2_GENCALL ((uint32_t)0x00000010) /*!<General Call Address (Slave mode) */
+#define I2C_SR2_SMBDEFAULT ((uint32_t)0x00000020) /*!<SMBus Device Default Address (Slave mode) */
+#define I2C_SR2_SMBHOST ((uint32_t)0x00000040) /*!<SMBus Host Header (Slave mode) */
+#define I2C_SR2_DUALF ((uint32_t)0x00000080) /*!<Dual Flag (Slave mode) */
+#define I2C_SR2_PEC ((uint32_t)0x0000FF00) /*!<Packet Error Checking Register */
+
+/******************* Bit definition for I2C_CCR register ********************/
+#define I2C_CCR_CCR ((uint32_t)0x00000FFF) /*!<Clock Control Register in Fast/Standard mode (Master mode) */
+#define I2C_CCR_DUTY ((uint32_t)0x00004000) /*!<Fast Mode Duty Cycle */
+#define I2C_CCR_FS ((uint32_t)0x00008000) /*!<I2C Master Mode Selection */
+
+/****************** Bit definition for I2C_TRISE register *******************/
+#define I2C_TRISE_TRISE ((uint32_t)0x0000003F) /*!<Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/****************** Bit definition for I2C_FLTR register *******************/
+#define I2C_FLTR_DNF ((uint32_t)0x0000000F) /*!<Digital Noise Filter */
+#define I2C_FLTR_ANOFF ((uint32_t)0x00000010) /*!<Analog Noise Filter OFF */
+
+/******************************************************************************/
+/* */
+/* Fast Mode Plus Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register *******************/
+#define FMPI2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define FMPI2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define FMPI2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define FMPI2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define FMPI2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define FMPI2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define FMPI2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define FMPI2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define FMPI2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define FMPI2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define FMPI2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define FMPI2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define FMPI2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define FMPI2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define FMPI2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define FMPI2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define FMPI2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define FMPI2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define FMPI2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define FMPI2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define FMPI2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define FMPI2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define FMPI2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define FMPI2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define FMPI2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define FMPI2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define FMPI2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define FMPI2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define FMPI2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define FMPI2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define FMPI2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define FMPI2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define FMPI2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define FMPI2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define FMPI2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define FMPI2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define FMPI2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define FMPI2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register *******************/
+#define FMPI2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define FMPI2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define FMPI2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define FMPI2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define FMPI2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register *******************/
+#define FMPI2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define FMPI2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define FMPI2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define FMPI2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B */
+#define FMPI2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register *********************/
+#define FMPI2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define FMPI2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define FMPI2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define FMPI2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode) */
+#define FMPI2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define FMPI2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define FMPI2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define FMPI2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define FMPI2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define FMPI2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define FMPI2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define FMPI2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define FMPI2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define FMPI2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define FMPI2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define FMPI2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define FMPI2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register *********************/
+#define FMPI2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define FMPI2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define FMPI2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define FMPI2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define FMPI2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define FMPI2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define FMPI2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define FMPI2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define FMPI2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *********************/
+#define FMPI2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define FMPI2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *********************/
+#define FMPI2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!<Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!<PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!<Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!<Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!<Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!<Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!<Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!<Watchdog counter reload value update */
+
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-Power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+#define PWR_CR_FPDS ((uint32_t)0x00000200) /*!< Flash power down in Stop mode */
+#define PWR_CR_LPLVDS ((uint32_t)0x00000400) /*!< Low Power Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_MRLVDS ((uint32_t)0x00000800) /*!< Main Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_ADCDC1 ((uint32_t)0x00002000) /*!< Refer to AN4073 on how to use this bit */
+
+#define PWR_CR_VOS ((uint32_t)0x0000C000) /*!< VOS[1:0] bits (Regulator voltage scaling output selection) */
+#define PWR_CR_VOS_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define PWR_CR_VOS_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+
+#define PWR_CR_FMSSR ((uint32_t)0x00100000) /*!< Flash Memory Sleep System Run */
+#define PWR_CR_FISSR ((uint32_t)0x00200000) /*!< Flash Interface Stop while System Run */
+/* Legacy define */
+#define PWR_CR_PMODE PWR_CR_VOS
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+#define PWR_CSR_BRR ((uint32_t)0x00000008) /*!< Backup regulator ready */
+#define PWR_CSR_EWUP ((uint32_t)0x00000100) /*!< Enable WKUP pin */
+#define PWR_CSR_BRE ((uint32_t)0x00000200) /*!< Backup regulator enable */
+#define PWR_CSR_VOSRDY ((uint32_t)0x00004000) /*!< Regulator voltage scaling output selection ready */
+
+/* Legacy define */
+#define PWR_CSR_REGRDY PWR_CSR_VOSRDY
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION ((uint32_t)0x00000001)
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002)
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8)
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008)/*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010)/*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020)/*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040)/*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080)/*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00)
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100)/*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200)/*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400)/*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800)/*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000)/*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000)/*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000)/*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000)/*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000)
+#define RCC_CR_HSERDY ((uint32_t)0x00020000)
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000)
+#define RCC_CR_CSSON ((uint32_t)0x00080000)
+#define RCC_CR_PLLON ((uint32_t)0x01000000)
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000)
+
+/******************** Bit definition for RCC_PLLCFGR register ***************/
+#define RCC_PLLCFGR_PLLM ((uint32_t)0x0000003F)
+#define RCC_PLLCFGR_PLLM_0 ((uint32_t)0x00000001)
+#define RCC_PLLCFGR_PLLM_1 ((uint32_t)0x00000002)
+#define RCC_PLLCFGR_PLLM_2 ((uint32_t)0x00000004)
+#define RCC_PLLCFGR_PLLM_3 ((uint32_t)0x00000008)
+#define RCC_PLLCFGR_PLLM_4 ((uint32_t)0x00000010)
+#define RCC_PLLCFGR_PLLM_5 ((uint32_t)0x00000020)
+
+#define RCC_PLLCFGR_PLLN ((uint32_t)0x00007FC0)
+#define RCC_PLLCFGR_PLLN_0 ((uint32_t)0x00000040)
+#define RCC_PLLCFGR_PLLN_1 ((uint32_t)0x00000080)
+#define RCC_PLLCFGR_PLLN_2 ((uint32_t)0x00000100)
+#define RCC_PLLCFGR_PLLN_3 ((uint32_t)0x00000200)
+#define RCC_PLLCFGR_PLLN_4 ((uint32_t)0x00000400)
+#define RCC_PLLCFGR_PLLN_5 ((uint32_t)0x00000800)
+#define RCC_PLLCFGR_PLLN_6 ((uint32_t)0x00001000)
+#define RCC_PLLCFGR_PLLN_7 ((uint32_t)0x00002000)
+#define RCC_PLLCFGR_PLLN_8 ((uint32_t)0x00004000)
+
+#define RCC_PLLCFGR_PLLP ((uint32_t)0x00030000)
+#define RCC_PLLCFGR_PLLP_0 ((uint32_t)0x00010000)
+#define RCC_PLLCFGR_PLLP_1 ((uint32_t)0x00020000)
+
+#define RCC_PLLCFGR_PLLSRC ((uint32_t)0x00400000)
+#define RCC_PLLCFGR_PLLSRC_HSE ((uint32_t)0x00400000)
+#define RCC_PLLCFGR_PLLSRC_HSI ((uint32_t)0x00000000)
+
+#define RCC_PLLCFGR_PLLQ ((uint32_t)0x0F000000)
+#define RCC_PLLCFGR_PLLQ_0 ((uint32_t)0x01000000)
+#define RCC_PLLCFGR_PLLQ_1 ((uint32_t)0x02000000)
+#define RCC_PLLCFGR_PLLQ_2 ((uint32_t)0x04000000)
+#define RCC_PLLCFGR_PLLQ_3 ((uint32_t)0x08000000)
+
+#define RCC_PLLCFGR_PLLR ((uint32_t)0x70000000)
+#define RCC_PLLCFGR_PLLR_0 ((uint32_t)0x10000000)
+#define RCC_PLLCFGR_PLLR_1 ((uint32_t)0x20000000)
+#define RCC_PLLCFGR_PLLR_2 ((uint32_t)0x40000000)
+/******************** Bit definition for RCC_CFGR register ******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< MCO1EN configuration */
+#define RCC_CFGR_MCO1EN ((uint32_t)0x00000100) /*!< MCO1EN bit */
+
+/*!< MCO2EN configuration */
+#define RCC_CFGR_MCO2EN ((uint32_t)0x00000200) /*!< MCO2EN bit */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 ((uint32_t)0x00001C00) /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00001000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00001400) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00001800) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00001C00) /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 ((uint32_t)0x0000E000) /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00008000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00008000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x0000A000) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x0000C000) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x0000E000) /*!< HCLK divided by 16 */
+
+/*!< RTCPRE configuration */
+#define RCC_CFGR_RTCPRE ((uint32_t)0x001F0000)
+#define RCC_CFGR_RTCPRE_0 ((uint32_t)0x00010000)
+#define RCC_CFGR_RTCPRE_1 ((uint32_t)0x00020000)
+#define RCC_CFGR_RTCPRE_2 ((uint32_t)0x00040000)
+#define RCC_CFGR_RTCPRE_3 ((uint32_t)0x00080000)
+#define RCC_CFGR_RTCPRE_4 ((uint32_t)0x00100000)
+
+/*!< MCO1 configuration */
+#define RCC_CFGR_MCO1 ((uint32_t)0x00600000)
+#define RCC_CFGR_MCO1_0 ((uint32_t)0x00200000)
+#define RCC_CFGR_MCO1_1 ((uint32_t)0x00400000)
+
+#define RCC_CFGR_MCO1PRE ((uint32_t)0x07000000)
+#define RCC_CFGR_MCO1PRE_0 ((uint32_t)0x01000000)
+#define RCC_CFGR_MCO1PRE_1 ((uint32_t)0x02000000)
+#define RCC_CFGR_MCO1PRE_2 ((uint32_t)0x04000000)
+
+#define RCC_CFGR_MCO2PRE ((uint32_t)0x38000000)
+#define RCC_CFGR_MCO2PRE_0 ((uint32_t)0x08000000)
+#define RCC_CFGR_MCO2PRE_1 ((uint32_t)0x10000000)
+#define RCC_CFGR_MCO2PRE_2 ((uint32_t)0x20000000)
+
+#define RCC_CFGR_MCO2 ((uint32_t)0xC0000000)
+#define RCC_CFGR_MCO2_0 ((uint32_t)0x40000000)
+#define RCC_CFGR_MCO2_1 ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_CIR register *******************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001)
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002)
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004)
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008)
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010)
+
+#define RCC_CIR_CSSF ((uint32_t)0x00000080)
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100)
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200)
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400)
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800)
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000)
+
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000)
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000)
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000)
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000)
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000)
+
+#define RCC_CIR_CSSC ((uint32_t)0x00800000)
+
+/******************** Bit definition for RCC_AHB1RSTR register **************/
+#define RCC_AHB1RSTR_GPIOARST ((uint32_t)0x00000001)
+#define RCC_AHB1RSTR_GPIOBRST ((uint32_t)0x00000002)
+#define RCC_AHB1RSTR_GPIOCRST ((uint32_t)0x00000004)
+#define RCC_AHB1RSTR_GPIOHRST ((uint32_t)0x00000080)
+#define RCC_AHB1RSTR_CRCRST ((uint32_t)0x00001000)
+#define RCC_AHB1RSTR_DMA1RST ((uint32_t)0x00200000)
+#define RCC_AHB1RSTR_DMA2RST ((uint32_t)0x00400000)
+#define RCC_AHB1RSTR_RNGRST ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_APB1RSTR register **************/
+#define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008)
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010)
+#define RCC_APB1RSTR_LPTIM1RST ((uint32_t)0x00000200)
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800)
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000)
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000)
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000)
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000)
+#define RCC_APB1RSTR_FMPI2C1RST ((uint32_t)0x01000000)
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000)
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000)
+
+/******************** Bit definition for RCC_APB2RSTR register **************/
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000001)
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00000010)
+#define RCC_APB2RSTR_USART6RST ((uint32_t)0x00000020)
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000100)
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000)
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00004000)
+#define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00010000)
+#define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00040000)
+#define RCC_APB2RSTR_SPI5RST ((uint32_t)0x00100000)
+
+/******************** Bit definition for RCC_AHB1ENR register ***************/
+#define RCC_AHB1ENR_GPIOAEN ((uint32_t)0x00000001)
+#define RCC_AHB1ENR_GPIOBEN ((uint32_t)0x00000002)
+#define RCC_AHB1ENR_GPIOCEN ((uint32_t)0x00000004)
+#define RCC_AHB1ENR_GPIOHEN ((uint32_t)0x00000080)
+#define RCC_AHB1ENR_CRCEN ((uint32_t)0x00001000)
+#define RCC_AHB1ENR_DMA1EN ((uint32_t)0x00200000)
+#define RCC_AHB1ENR_DMA2EN ((uint32_t)0x00400000)
+#define RCC_AHB1ENR_RNGEN ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_APB1ENR register ***************/
+#define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008)
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010)
+#define RCC_APB1ENR_LPTIM1EN ((uint32_t)0x00000200)
+#define RCC_APB1ENR_RTCAPBEN ((uint32_t)0x00000400)
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800)
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000)
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000)
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000)
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000)
+#define RCC_APB1ENR_FMPI2C1EN ((uint32_t)0x01000000)
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000)
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000)
+
+/******************** Bit definition for RCC_APB2ENR register ***************/
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000001)
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00000010)
+#define RCC_APB2ENR_USART6EN ((uint32_t)0x00000020)
+#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000100)
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000)
+#define RCC_APB2ENR_SYSCFGEN ((uint32_t)0x00004000)
+#define RCC_APB2ENR_EXTITEN ((uint32_t)0x00008000)
+#define RCC_APB2ENR_TIM9EN ((uint32_t)0x00010000)
+#define RCC_APB2ENR_TIM11EN ((uint32_t)0x00040000)
+#define RCC_APB2ENR_SPI5EN ((uint32_t)0x00100000)
+
+/******************** Bit definition for RCC_AHB1LPENR register *************/
+#define RCC_AHB1LPENR_GPIOALPEN ((uint32_t)0x00000001)
+#define RCC_AHB1LPENR_GPIOBLPEN ((uint32_t)0x00000002)
+#define RCC_AHB1LPENR_GPIOCLPEN ((uint32_t)0x00000004)
+#define RCC_AHB1LPENR_GPIOHLPEN ((uint32_t)0x00000080)
+#define RCC_AHB1LPENR_CRCLPEN ((uint32_t)0x00001000)
+#define RCC_AHB1LPENR_FLITFLPEN ((uint32_t)0x00008000)
+#define RCC_AHB1LPENR_SRAM1LPEN ((uint32_t)0x00010000)
+#define RCC_AHB1LPENR_DMA1LPEN ((uint32_t)0x00200000)
+#define RCC_AHB1LPENR_DMA2LPEN ((uint32_t)0x00400000)
+#define RCC_AHB1LPENR_RNGLPEN ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_APB1LPENR register *************/
+#define RCC_APB1LPENR_TIM5LPEN ((uint32_t)0x00000008)
+#define RCC_APB1LPENR_TIM6LPEN ((uint32_t)0x00000010)
+#define RCC_APB1LPENR_LPTIM1LPEN ((uint32_t)0x00000200)
+#define RCC_APB1LPENR_RTCAPBLPEN ((uint32_t)0x00000400)
+#define RCC_APB1LPENR_WWDGLPEN ((uint32_t)0x00000800)
+#define RCC_APB1LPENR_SPI2LPEN ((uint32_t)0x00004000)
+#define RCC_APB1LPENR_USART2LPEN ((uint32_t)0x00020000)
+#define RCC_APB1LPENR_I2C1LPEN ((uint32_t)0x00200000)
+#define RCC_APB1LPENR_I2C2LPEN ((uint32_t)0x00400000)
+#define RCC_APB1LPENR_FMPI2C1LPEN ((uint32_t)0x01000000)
+#define RCC_APB1LPENR_PWRLPEN ((uint32_t)0x10000000)
+#define RCC_APB1LPENR_DACLPEN ((uint32_t)0x20000000)
+
+/******************** Bit definition for RCC_APB2LPENR register *************/
+#define RCC_APB2LPENR_TIM1LPEN ((uint32_t)0x00000001)
+#define RCC_APB2LPENR_USART1LPEN ((uint32_t)0x00000010)
+#define RCC_APB2LPENR_USART6LPEN ((uint32_t)0x00000020)
+#define RCC_APB2LPENR_ADC1LPEN ((uint32_t)0x00000100)
+#define RCC_APB2LPENR_SPI1LPEN ((uint32_t)0x00001000)
+#define RCC_APB2LPENR_SYSCFGLPEN ((uint32_t)0x00004000)
+#define RCC_APB2LPENR_EXTITLPEN ((uint32_t)0x00008000)
+#define RCC_APB2LPENR_TIM9LPEN ((uint32_t)0x00010000)
+#define RCC_APB2LPENR_TIM11LPEN ((uint32_t)0x00040000)
+#define RCC_APB2LPENR_SPI5LPEN ((uint32_t)0x00100000)
+
+/******************** Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001)
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002)
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004)
+#define RCC_BDCR_LSEMOD ((uint32_t)0x00000008)
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300)
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100)
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200)
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000)
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000)
+
+/******************** Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001)
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002)
+#define RCC_CSR_RMVF ((uint32_t)0x01000000)
+#define RCC_CSR_BORRSTF ((uint32_t)0x02000000)
+#define RCC_CSR_PADRSTF ((uint32_t)0x04000000)
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000)
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000)
+#define RCC_CSR_WDGRSTF ((uint32_t)0x20000000)
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000)
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_SSCGR register *****************/
+#define RCC_SSCGR_MODPER ((uint32_t)0x00001FFF)
+#define RCC_SSCGR_INCSTEP ((uint32_t)0x0FFFE000)
+#define RCC_SSCGR_SPREADSEL ((uint32_t)0x40000000)
+#define RCC_SSCGR_SSCGEN ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_DCKCFGR register ***************/
+#define RCC_DCKCFGR_TIMPRE ((uint32_t)0x01000000)
+#define RCC_DCKCFGR_I2SSRC ((uint32_t)0x06000000)
+#define RCC_DCKCFGR_I2SSRC_0 ((uint32_t)0x02000000)
+#define RCC_DCKCFGR_I2SSRC_1 ((uint32_t)0x04000000)
+
+/******************** Bit definition for RCC_CKGATENR register **************/
+#define RCC_CKGATENR_AHB2APB1_CKEN ((uint32_t)0x00000001)
+#define RCC_CKGATENR_AHB2APB2_CKEN ((uint32_t)0x00000002)
+#define RCC_CKGATENR_CM4DBG_CKEN ((uint32_t)0x00000004)
+#define RCC_CKGATENR_SPARE_CKEN ((uint32_t)0x00000008)
+#define RCC_CKGATENR_SRAM_CKEN ((uint32_t)0x00000010)
+#define RCC_CKGATENR_FLITF_CKEN ((uint32_t)0x00000020)
+#define RCC_CKGATENR_RCC_CKEN ((uint32_t)0x00000040)
+
+/******************** Bit definition for RCC_DCKCFGR2 register **************/
+#define RCC_DCKCFGR2_FMPI2C1SEL ((uint32_t)0x00C00000)
+#define RCC_DCKCFGR2_FMPI2C1SEL_0 ((uint32_t)0x00400000)
+#define RCC_DCKCFGR2_FMPI2C1SEL_1 ((uint32_t)0x00800000)
+#define RCC_DCKCFGR2_LPTIM1SEL ((uint32_t)0xC0000000)
+#define RCC_DCKCFGR2_LPTIM1SEL_0 ((uint32_t)0x40000000)
+#define RCC_DCKCFGR2_LPTIM1SEL_1 ((uint32_t)0x80000000)
+
+/******************************************************************************/
+/* */
+/* RNG */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RNG_CR register *******************/
+#define RNG_CR_RNGEN ((uint32_t)0x00000004)
+#define RNG_CR_IE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RNG_SR register *******************/
+#define RNG_SR_DRDY ((uint32_t)0x00000001)
+#define RNG_SR_CECS ((uint32_t)0x00000002)
+#define RNG_SR_SECS ((uint32_t)0x00000004)
+#define RNG_SR_CEIS ((uint32_t)0x00000020)
+#define RNG_SR_SEIS ((uint32_t)0x00000040)
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_DCE ((uint32_t)0x00000080)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALIBR register ***************/
+#define RTC_CALIBR_DCS ((uint32_t)0x00000080)
+#define RTC_CALIBR_DC ((uint32_t)0x0000001F)
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TSINSEL ((uint32_t)0x00020000)
+#define RTC_TAFCR_TAMPINSEL ((uint32_t)0x00010000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP16R register ***************/
+#define RTC_BKP16R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP17R register ***************/
+#define RTC_BKP17R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP18R register ***************/
+#define RTC_BKP18R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP19R register ***************/
+#define RTC_BKP19R ((uint32_t)0xFFFFFFFF)
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!<Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!<Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!<Master Selection */
+
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!<BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!<SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!<Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!<Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!<Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!<Receive only */
+#define SPI_CR1_DFF ((uint32_t)0x00000800) /*!<Data Frame Format */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!<Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!<Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!<Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!<Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!<Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!<Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!<SS Output Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!<Frame Format */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!<Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!<RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!<Tx buffer Empty Interrupt Enable */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!<Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!<Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!<Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!<Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!<CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!<Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!<Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!<Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!<Frame format error flag */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR ((uint32_t)0x0000FFFF) /*!<Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0x0000FFFF) /*!<CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0x0000FFFF) /*!<Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0x0000FFFF) /*!<Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* SYSCFG */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SYSCFG_MEMRMP register ***************/
+#define SYSCFG_MEMRMP_MEM_MODE ((uint32_t)0x00000007) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_MEMRMP_MEM_MODE_0 ((uint32_t)0x00000001)
+#define SYSCFG_MEMRMP_MEM_MODE_1 ((uint32_t)0x00000002)
+#define SYSCFG_MEMRMP_MEM_MODE_2 ((uint32_t)0x00000004)
+
+/****************** Bit definition for SYSCFG_PMC register ******************/
+#define SYSCFG_PMC_ADC1DC2 ((uint32_t)0x00010000) /*!< Refer to AN4073 on how to use this bit */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint32_t)0x000F) /*!<EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint32_t)0x00F0) /*!<EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint32_t)0x0F00) /*!<EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint32_t)0xF000) /*!<EXTI 3 configuration */
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint32_t)0x0000) /*!<PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint32_t)0x0001) /*!<PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint32_t)0x0002) /*!<PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH ((uint32_t)0x0007) /*!<PH[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint32_t)0x0000) /*!<PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint32_t)0x0010) /*!<PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint32_t)0x0020) /*!<PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH ((uint32_t)0x0070) /*!<PH[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint32_t)0x0000) /*!<PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint32_t)0x0100) /*!<PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint32_t)0x0200) /*!<PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH ((uint32_t)0x0700) /*!<PH[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint32_t)0x0000) /*!<PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint32_t)0x1000) /*!<PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint32_t)0x2000) /*!<PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PH ((uint32_t)0x7000) /*!<PH[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register ***************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint32_t)0x000F) /*!<EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint32_t)0x00F0) /*!<EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint32_t)0x0F00) /*!<EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint32_t)0xF000) /*!<EXTI 7 configuration */
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint32_t)0x0000) /*!<PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint32_t)0x0001) /*!<PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint32_t)0x0002) /*!<PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH ((uint32_t)0x0007) /*!<PH[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint32_t)0x0000) /*!<PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint32_t)0x0010) /*!<PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint32_t)0x0020) /*!<PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PH ((uint32_t)0x0070) /*!<PH[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint32_t)0x0000) /*!<PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint32_t)0x0100) /*!<PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint32_t)0x0200) /*!<PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PH ((uint32_t)0x0700) /*!<PH[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint32_t)0x0000) /*!<PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint32_t)0x1000) /*!<PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint32_t)0x2000) /*!<PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PH ((uint32_t)0x7000) /*!<PH[7] pin */
+
+
+/***************** Bit definition for SYSCFG_EXTICR3 register ***************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint32_t)0x000F) /*!<EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint32_t)0x00F0) /*!<EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint32_t)0x0F00) /*!<EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint32_t)0xF000) /*!<EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint32_t)0x0000) /*!<PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint32_t)0x0001) /*!<PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint32_t)0x0002) /*!<PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PH ((uint32_t)0x0007) /*!<PH[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint32_t)0x0000) /*!<PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint32_t)0x0010) /*!<PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint32_t)0x0020) /*!<PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PH ((uint32_t)0x0070) /*!<PH[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint32_t)0x0000) /*!<PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint32_t)0x0100) /*!<PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint32_t)0x0200) /*!<PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PH ((uint32_t)0x0700) /*!<PH[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint32_t)0x0000) /*!<PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint32_t)0x1000) /*!<PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint32_t)0x2000) /*!<PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PH ((uint32_t)0x7000) /*!<PH[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register ***************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint32_t)0x000F) /*!<EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint32_t)0x00F0) /*!<EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint32_t)0x0F00) /*!<EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint32_t)0xF000) /*!<EXTI 15 configuration */
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint32_t)0x0000) /*!<PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint32_t)0x0001) /*!<PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint32_t)0x0002) /*!<PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PH ((uint32_t)0x0007) /*!<PH[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint32_t)0x0000) /*!<PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint32_t)0x0010) /*!<PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint32_t)0x0020) /*!<PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PH ((uint32_t)0x0070) /*!<PH[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint32_t)0x0000) /*!<PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint32_t)0x0100) /*!<PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint32_t)0x0200) /*!<PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PH ((uint32_t)0x0700) /*!<PH[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint32_t)0x0000) /*!<PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint32_t)0x1000) /*!<PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint32_t)0x2000) /*!<PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PH ((uint32_t)0x7000) /*!<PH[15] pin */
+
+/****************** Bit definition for SYSCFG_CMPCR register ****************/
+#define SYSCFG_CMPCR_CMP_PD ((uint32_t)0x00000001) /*!<Compensation cell ready flag */
+#define SYSCFG_CMPCR_READY ((uint32_t)0x00000100) /*!<Compensation cell power-down */
+
+/****************** Bit definition for SYSCFG_CFGR register *****************/
+#define SYSCFG_CFGR_FMPI2C1_SCL ((uint32_t)0x00000001) /*!<FM+ drive capability for FMPI2C1_SCL pin */
+#define SYSCFG_CFGR_FMPI2C1_SDA ((uint32_t)0x00000002) /*!<FM+ drive capability for FMPI2C1_SDA pin */
+
+/****************** Bit definition for SYSCFG_CFGR2 register *****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!<Core Lockup lock */
+#define SYSCFG_CFGR2_PVD_LOCK ((uint32_t)0x00000004) /*!<PVD Lock */
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN ((uint32_t)0x0001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x0002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x0004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x0008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x0010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x0060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x0020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x0040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x0080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x0300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC ((uint32_t)0x0001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x0004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x0008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x0070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x0080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x0100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x0200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x0400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x0800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x1000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x2000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x4000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS ((uint32_t)0x0007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x0004) /*!<Bit 2 */
+
+#define TIM_SMCR_TS ((uint32_t)0x0070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x0080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x0F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x0200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x0400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x0800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x3000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x2000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x4000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x8000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE ((uint32_t)0x0001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x0002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x0004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x0008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x0010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x0020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x0040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x0080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x0100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x0200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x0400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x0800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x1000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x2000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x4000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF ((uint32_t)0x0001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x0002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x0004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x0008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x0010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x0020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x0040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x0080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x0200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x0400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x0800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x1000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG ((uint32_t)0x01) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x02) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x04) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x08) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x10) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x20) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x40) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x80) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x0003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x0002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x0004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x0008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x0070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x0080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x0300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x0400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x0800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x7000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x4000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x8000) /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x0004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x0008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x00F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x0040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x0080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x0C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x0400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x0800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0xF000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x4000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x8000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x0003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x0002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x0004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x0008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x0070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x0080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x0300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x0400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x0800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x7000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x4000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x8000) /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x0004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x0008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x00F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x0040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x0080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x0C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x0400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x0800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0xF000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x4000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x8000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E ((uint32_t)0x0001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x0002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x0004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x0008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x0010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x0020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x0040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x0080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x0100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x0200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x0400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x0800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x1000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x2000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x8000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC ((uint32_t)0xFFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP ((uint32_t)0xFF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0xFFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0xFFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0xFFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0xFFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG ((uint32_t)0x00FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x0040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x0080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x0300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x0400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x0800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x1000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x2000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x4000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x8000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA ((uint32_t)0x001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x0010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x1F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x0200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x0400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x0800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x1000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB ((uint32_t)0xFFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM_OR register *********************/
+#define TIM_OR_TI4_RMP ((uint32_t)0x00C0) /*!<TI4_RMP[1:0] bits (TIM5 Input 4 remap) */
+#define TIM_OR_TI4_RMP_0 ((uint32_t)0x0040) /*!<Bit 0 */
+#define TIM_OR_TI4_RMP_1 ((uint32_t)0x0080) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Low Power Timer (LPTIM) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for LPTIM_ISR register *******************/
+#define LPTIM_ISR_CMPM ((uint32_t)0x00000001) /*!< Compare match */
+#define LPTIM_ISR_ARRM ((uint32_t)0x00000002) /*!< Autoreload match */
+#define LPTIM_ISR_EXTTRIG ((uint32_t)0x00000004) /*!< External trigger edge event */
+#define LPTIM_ISR_CMPOK ((uint32_t)0x00000008) /*!< Compare register update OK */
+#define LPTIM_ISR_ARROK ((uint32_t)0x00000010) /*!< Autoreload register update OK */
+#define LPTIM_ISR_UP ((uint32_t)0x00000020) /*!< Counter direction change down to up */
+#define LPTIM_ISR_DOWN ((uint32_t)0x00000040) /*!< Counter direction change up to down */
+
+/****************** Bit definition for LPTIM_ICR register *******************/
+#define LPTIM_ICR_CMPMCF ((uint32_t)0x00000001) /*!< Compare match Clear Flag */
+#define LPTIM_ICR_ARRMCF ((uint32_t)0x00000002) /*!< Autoreload match Clear Flag */
+#define LPTIM_ICR_EXTTRIGCF ((uint32_t)0x00000004) /*!< External trigger edge event Clear Flag */
+#define LPTIM_ICR_CMPOKCF ((uint32_t)0x00000008) /*!< Compare register update OK Clear Flag */
+#define LPTIM_ICR_ARROKCF ((uint32_t)0x00000010) /*!< Autoreload register update OK Clear Flag */
+#define LPTIM_ICR_UPCF ((uint32_t)0x00000020) /*!< Counter direction change down to up Clear Flag */
+#define LPTIM_ICR_DOWNCF ((uint32_t)0x00000040) /*!< Counter direction change up to down Clear Flag */
+
+/****************** Bit definition for LPTIM_IER register ********************/
+#define LPTIM_IER_CMPMIE ((uint32_t)0x00000001) /*!< Compare match Interrupt Enable */
+#define LPTIM_IER_ARRMIE ((uint32_t)0x00000002) /*!< Autoreload match Interrupt Enable */
+#define LPTIM_IER_EXTTRIGIE ((uint32_t)0x00000004) /*!< External trigger edge event Interrupt Enable */
+#define LPTIM_IER_CMPOKIE ((uint32_t)0x00000008) /*!< Compare register update OK Interrupt Enable */
+#define LPTIM_IER_ARROKIE ((uint32_t)0x00000010) /*!< Autoreload register update OK Interrupt Enable */
+#define LPTIM_IER_UPIE ((uint32_t)0x00000020) /*!< Counter direction change down to up Interrupt Enable */
+#define LPTIM_IER_DOWNIE ((uint32_t)0x00000040) /*!< Counter direction change up to down Interrupt Enable */
+
+/****************** Bit definition for LPTIM_CFGR register *******************/
+#define LPTIM_CFGR_CKSEL ((uint32_t)0x00000001) /*!< Clock selector */
+
+#define LPTIM_CFGR_CKPOL ((uint32_t)0x00000006) /*!< CKPOL[1:0] bits (Clock polarity) */
+#define LPTIM_CFGR_CKPOL_0 ((uint32_t)0x00000002) /*!< Bit 0 */
+#define LPTIM_CFGR_CKPOL_1 ((uint32_t)0x00000004) /*!< Bit 1 */
+
+#define LPTIM_CFGR_CKFLT ((uint32_t)0x00000018) /*!< CKFLT[1:0] bits (Configurable digital filter for external clock) */
+#define LPTIM_CFGR_CKFLT_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define LPTIM_CFGR_CKFLT_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define LPTIM_CFGR_TRGFLT ((uint32_t)0x000000C0) /*!< TRGFLT[1:0] bits (Configurable digital filter for trigger) */
+#define LPTIM_CFGR_TRGFLT_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define LPTIM_CFGR_TRGFLT_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define LPTIM_CFGR_PRESC ((uint32_t)0x00000E00) /*!< PRESC[2:0] bits (Clock prescaler) */
+#define LPTIM_CFGR_PRESC_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define LPTIM_CFGR_PRESC_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define LPTIM_CFGR_PRESC_2 ((uint32_t)0x00000800) /*!< Bit 2 */
+
+#define LPTIM_CFGR_TRIGSEL ((uint32_t)0x0000E000) /*!< TRIGSEL[2:0]] bits (Trigger selector) */
+#define LPTIM_CFGR_TRIGSEL_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define LPTIM_CFGR_TRIGSEL_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+#define LPTIM_CFGR_TRIGSEL_2 ((uint32_t)0x00008000) /*!< Bit 2 */
+
+#define LPTIM_CFGR_TRIGEN ((uint32_t)0x00060000) /*!< TRIGEN[1:0] bits (Trigger enable and polarity) */
+#define LPTIM_CFGR_TRIGEN_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define LPTIM_CFGR_TRIGEN_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+
+#define LPTIM_CFGR_TIMOUT ((uint32_t)0x00080000) /*!< Timout enable */
+#define LPTIM_CFGR_WAVE ((uint32_t)0x00100000) /*!< Waveform shape */
+#define LPTIM_CFGR_WAVPOL ((uint32_t)0x00200000) /*!< Waveform shape polarity */
+#define LPTIM_CFGR_PRELOAD ((uint32_t)0x00400000) /*!< Reg update mode */
+#define LPTIM_CFGR_COUNTMODE ((uint32_t)0x00800000) /*!< Counter mode enable */
+#define LPTIM_CFGR_ENC ((uint32_t)0x01000000) /*!< Encoder mode enable */
+
+/****************** Bit definition for LPTIM_CR register ********************/
+#define LPTIM_CR_ENABLE ((uint32_t)0x00000001) /*!< LPTIMer enable */
+#define LPTIM_CR_SNGSTRT ((uint32_t)0x00080002) /*!< Timer start in single mode */
+#define LPTIM_CR_CNTSTRT ((uint32_t)0x00000004) /*!< Timer start in continuous mode */
+
+/****************** Bit definition for LPTIM_CMP register *******************/
+#define LPTIM_CMP_CMP ((uint32_t)0x0000FFFF) /*!< Compare register */
+
+/****************** Bit definition for LPTIM_ARR register *******************/
+#define LPTIM_ARR_ARR ((uint32_t)0x0000FFFF) /*!< Auto reload register */
+
+/****************** Bit definition for LPTIM_CNT register *******************/
+#define LPTIM_CNT_CNT ((uint32_t)0x0000FFFF) /*!< Counter register */
+
+/****************** Bit definition for LPTIM_OR register *******************/
+#define LPTIM_OR_OR ((uint32_t)0x00000003) /*!< LPTIMER[1:0] bits (Remap selection) */
+#define LPTIM_OR_OR_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define LPTIM_OR_OR_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter */
+/* */
+/******************************************************************************/
+/******************* Bit definition for USART_SR register *******************/
+#define USART_SR_PE ((uint32_t)0x0001) /*!<Parity Error */
+#define USART_SR_FE ((uint32_t)0x0002) /*!<Framing Error */
+#define USART_SR_NE ((uint32_t)0x0004) /*!<Noise Error Flag */
+#define USART_SR_ORE ((uint32_t)0x0008) /*!<OverRun Error */
+#define USART_SR_IDLE ((uint32_t)0x0010) /*!<IDLE line detected */
+#define USART_SR_RXNE ((uint32_t)0x0020) /*!<Read Data Register Not Empty */
+#define USART_SR_TC ((uint32_t)0x0040) /*!<Transmission Complete */
+#define USART_SR_TXE ((uint32_t)0x0080) /*!<Transmit Data Register Empty */
+#define USART_SR_LBD ((uint32_t)0x0100) /*!<LIN Break Detection Flag */
+#define USART_SR_CTS ((uint32_t)0x0200) /*!<CTS Flag */
+
+/******************* Bit definition for USART_DR register *******************/
+#define USART_DR_DR ((uint32_t)0x01FF) /*!<Data value */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_Fraction ((uint32_t)0x000F) /*!<Fraction of USARTDIV */
+#define USART_BRR_DIV_Mantissa ((uint32_t)0xFFF0) /*!<Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_SBK ((uint32_t)0x0001) /*!<Send Break */
+#define USART_CR1_RWU ((uint32_t)0x0002) /*!<Receiver wakeup */
+#define USART_CR1_RE ((uint32_t)0x0004) /*!<Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x0008) /*!<Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x0010) /*!<IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x0020) /*!<RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x0040) /*!<Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x0080) /*!<PE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x0100) /*!<PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x0200) /*!<Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x0400) /*!<Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x0800) /*!<Wakeup method */
+#define USART_CR1_M ((uint32_t)0x1000) /*!<Word length */
+#define USART_CR1_UE ((uint32_t)0x2000) /*!<USART Enable */
+#define USART_CR1_OVER8 ((uint32_t)0x8000) /*!<USART Oversampling by 8 enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADD ((uint32_t)0x000F) /*!<Address of the USART node */
+#define USART_CR2_LBDL ((uint32_t)0x0020) /*!<LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x0040) /*!<LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x0100) /*!<Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x0200) /*!<Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x0400) /*!<Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x0800) /*!<Clock Enable */
+
+#define USART_CR2_STOP ((uint32_t)0x3000) /*!<STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x2000) /*!<Bit 1 */
+
+#define USART_CR2_LINEN ((uint32_t)0x4000) /*!<LIN mode enable */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x0001) /*!<Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x0002) /*!<IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x0004) /*!<IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x0008) /*!<Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x0010) /*!<Smartcard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x0020) /*!<Smartcard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x0040) /*!<DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x0080) /*!<DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x0100) /*!<RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x0200) /*!<CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x0400) /*!<CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x0800) /*!<USART One bit method enable */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x00FF) /*!<PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_PSC_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define USART_GTPR_PSC_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define USART_GTPR_PSC_2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define USART_GTPR_PSC_3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define USART_GTPR_PSC_4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define USART_GTPR_PSC_5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define USART_GTPR_PSC_6 ((uint32_t)0x0040) /*!<Bit 6 */
+#define USART_GTPR_PSC_7 ((uint32_t)0x0080) /*!<Bit 7 */
+
+#define USART_GTPR_GT ((uint32_t)0xFF00) /*!<Guard time value */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!<DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!<DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!<DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!<TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!<WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!<MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!<DAC channel1 DMA enable */
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!<DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!<DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!<DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!<TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!<Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!<Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!<Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!<WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!<Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!<Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!<MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!<DAC channel2 DMA enabled */
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x01) /*!<DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint32_t)0x02) /*!<DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x0FFF) /*!<DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint32_t)0xFFF0) /*!<DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint32_t)0xFF) /*!<DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint32_t)0x0FFF) /*!<DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint32_t)0xFFF0) /*!<DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint32_t)0xFF) /*!<DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!<DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!<DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!<DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!<DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x00FF) /*!<DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint32_t)0xFF00) /*!<DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint32_t)0x0FFF) /*!<DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint32_t)0x0FFF) /*!<DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!<DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!<DAC channel2 DMA underrun flag */
+/******************************************************************************/
+/* */
+/* DBG */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DBGMCU_IDCODE register *************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF)
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000)
+
+/******************** Bit definition for DBGMCU_CR register *****************/
+#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001)
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002)
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004)
+#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020)
+
+#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0)
+#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040)/*!<Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080)/*!<Bit 1 */
+
+/******************** Bit definition for DBGMCU_APB1_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM5_STOP ((uint32_t)0x00000008)
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010)
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400)
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800)
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000)
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
+#define DBGMCU_APB1_FZ_DBG_CAN1_STOP ((uint32_t)0x02000000)
+#define DBGMCU_APB1_FZ_DBG_CAN2_STOP ((uint32_t)0x04000000)
+
+/******************** Bit definition for DBGMCU_APB2_FZ register ************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB2_FZ_DBG_TIM9_STOP ((uint32_t)0x00010000)
+#define DBGMCU_APB2_FZ_DBG_TIM11_STOP ((uint32_t)0x00040000)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+
+/******************************* ADC Instances ********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+/******************************* CRC Instances ********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DAC Instances ********************************/
+#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC)
+
+/******************************** DMA Instances *******************************/
+#define IS_DMA_STREAM_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Stream0) || \
+ ((INSTANCE) == DMA1_Stream1) || \
+ ((INSTANCE) == DMA1_Stream2) || \
+ ((INSTANCE) == DMA1_Stream3) || \
+ ((INSTANCE) == DMA1_Stream4) || \
+ ((INSTANCE) == DMA1_Stream5) || \
+ ((INSTANCE) == DMA1_Stream6) || \
+ ((INSTANCE) == DMA1_Stream7) || \
+ ((INSTANCE) == DMA2_Stream0) || \
+ ((INSTANCE) == DMA2_Stream1) || \
+ ((INSTANCE) == DMA2_Stream2) || \
+ ((INSTANCE) == DMA2_Stream3) || \
+ ((INSTANCE) == DMA2_Stream4) || \
+ ((INSTANCE) == DMA2_Stream5) || \
+ ((INSTANCE) == DMA2_Stream6) || \
+ ((INSTANCE) == DMA2_Stream7))
+
+/******************************* GPIO Instances *******************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOH))
+
+/******************************** I2C Instances *******************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+/******************************** I2S Instances *******************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI5))
+
+/******************************* LPTIM Instances ******************************/
+#define IS_LPTIM_INSTANCE(__INSTANCE__) ((__INSTANCE__) == LPTIM1)
+
+/******************************* RNG Instances ********************************/
+#define IS_RNG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RNG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/******************************** SPI Instances *******************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI5))
+/*************************** SPI Extended Instances ***************************/
+#define IS_SPI_ALL_INSTANCE_EXT(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI5))
+
+/****************** TIM Instances : All supported instances *******************/
+#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM11))
+
+/************* TIM Instances : at least 1 capture/compare channel *************/
+#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM11))
+
+/************ TIM Instances : at least 2 capture/compare channels *************/
+#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/************ TIM Instances : at least 3 capture/compare channels *************/
+#define IS_TIM_CC3_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : at least 4 capture/compare channels *************/
+#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : Advanced-control timers *****************/
+#define IS_TIM_ADVANCED_INSTANCE(INSTANCE) ((INSTANCE) == TIM1)
+
+/******************* TIM Instances : Timer input XOR function *****************/
+#define IS_TIM_XOR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : DMA requests generation (UDE) *************/
+#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM6))
+
+/************ TIM Instances : DMA requests generation (CCxDE) *****************/
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (COMDE) *****************/
+#define IS_TIM_CCDMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : DMA burst feature ***********************/
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5))
+
+/****** TIM Instances : master mode available (TIMx_CR2.MMS available )********/
+#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM9))
+
+/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/********************** TIM Instances : 32 bit Counter ************************/
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)(((INSTANCE) == TIM5))
+
+/***************** TIM Instances : external trigger input availabe ************/
+#define IS_TIM_ETR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : remapping capability **********************/
+#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM11))
+
+/******************* TIM Instances : output(s) available **********************/
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM5) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM9) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM11) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+/************ TIM Instances : complementary output(s) available ***************/
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/***************************** FMPI2C Instances *******************************/
+#define IS_FMPI2C_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == FMPI2C1)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F410xx_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/stm32f4xx.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,251 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.4.1
+ * @date 09-October-2015
+ * @brief CMSIS STM32F4xx Device Peripheral Access Layer Header File.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The STM32F4xx device used in the target application
+ * - To use or not the peripherals drivers in application code(i.e.
+ * code will be based on direct access to peripherals registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_HAL_DRIVER"
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx
+ * @{
+ */
+
+#ifndef __STM32F4xx_H
+#define __STM32F4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F4)
+#define STM32F4
+#endif /* STM32F4 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \
+ !defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \
+ !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F410Tx) && !defined (STM32F410Cx) && \
+ !defined (STM32F410Rx) && !defined (STM32F411xE) && !defined (STM32F446xx) && !defined (STM32F469xx) && \
+ !defined (STM32F479xx)
+ /* #define STM32F405xx */ /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */
+ /* #define STM32F415xx */ /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */
+ /* #define STM32F407xx */ /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG and STM32F407IE Devices */
+ /* #define STM32F417xx */ /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */
+ /* #define STM32F427xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */
+ /* #define STM32F437xx */ /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */
+ /* #define STM32F429xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG,
+ STM32F439NI, STM32F429IG and STM32F429II Devices */
+ /* #define STM32F439xx */ /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG,
+ STM32F439NI, STM32F439IG and STM32F439II Devices */
+ /* #define STM32F401xC */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */
+ /* #define STM32F401xE */ /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */
+ /* #define STM32F410Tx */ /*!< STM32F410T8 and STM32F410TB Devices */
+ /* #define STM32F410Cx */ /*!< STM32F410C8 and STM32F410CB Devices */
+ #define STM32F410Rx /*!< STM32F410R8 and STM32F410RB Devices */
+ /* #define STM32F411xE */ /*!< STM32F411CD, STM32F411RD, STM32F411VD, STM32F411CE, STM32F411RE and STM32F411VE Devices */
+ /* #define STM32F446xx */ /*!< STM32F446MC, STM32F446ME, STM32F446RC, STM32F446RE, STM32F446VC, STM32F446VE, STM32F446ZC,
+ and STM32F446ZE Devices */
+ /* #define STM32F469xx */ /*!< STM32F469AI, STM32F469II, STM32F469BI, STM32F469NI, STM32F469AG, STM32F469IG, STM32F469BG,
+ STM32F469NG, STM32F469AE, STM32F469IE, STM32F469BE and STM32F469NE Devices */
+ /* #define STM32F479xx */ /*!< STM32F479AI, STM32F479II, STM32F479BI, STM32F479NI, STM32F479AG, STM32F479IG, STM32F479BG
+ and STM32F479NG Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.4.1
+ */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 (0x04) /*!< [23:16] sub1 version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION ((__STM32F4xx_CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F405xx)
+ #include "stm32f405xx.h"
+#elif defined(STM32F415xx)
+ #include "stm32f415xx.h"
+#elif defined(STM32F407xx)
+ #include "stm32f407xx.h"
+#elif defined(STM32F417xx)
+ #include "stm32f417xx.h"
+#elif defined(STM32F427xx)
+ #include "stm32f427xx.h"
+#elif defined(STM32F437xx)
+ #include "stm32f437xx.h"
+#elif defined(STM32F429xx)
+ #include "stm32f429xx.h"
+#elif defined(STM32F439xx)
+ #include "stm32f439xx.h"
+#elif defined(STM32F401xC)
+ #include "stm32f401xc.h"
+#elif defined(STM32F401xE)
+ #include "stm32f401xe.h"
+#elif defined(STM32F410Tx)
+ #include "stm32f410tx.h"
+#elif defined(STM32F410Cx)
+ #include "stm32f410cx.h"
+#elif defined(STM32F410Rx)
+ #include "stm32f410rx.h"
+#elif defined(STM32F411xE)
+ #include "stm32f411xe.h"
+#elif defined(STM32F446xx)
+ #include "stm32f446xx.h"
+#elif defined(STM32F469xx)
+ #include "stm32f469xx.h"
+#elif defined(STM32F479xx)
+ #include "stm32f479xx.h"
+#else
+ #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F4xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/stm32f4xx_hal_conf.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,405 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_conf.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 26-December-2014
+ * @brief HAL configuration file
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+/* #define HAL_DMA2D_MODULE_ENABLED */
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+/* #define HAL_SDRAM_MODULE_ENABLED */
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+/* #define HAL_SAI_MODULE_ENABLED */
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)32000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 1
+#define DATA_CACHE_ENABLE 1
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1 */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2
+#define MAC_ADDR1 0
+#define MAC_ADDR2 0
+#define MAC_ADDR3 0
+#define MAC_ADDR4 0
+#define MAC_ADDR5 0
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS 0x01
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY ((uint32_t)0x000000FF)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
+
+#define PHY_READ_TO ((uint32_t)0x0000FFFF)
+#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */
+#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */
+#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
+#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
+
+#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
+#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
+
+#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
+#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/system_stm32f4xx.c Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,763 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f4xx.c
+ * @author MCD Application Team
+ * @version V2.4.1
+ * @date 09-October-2015
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f4xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Includes
+ * @{
+ */
+
+
+#include "stm32f4xx.h"
+#include "hal_tick.h"
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+ * @{
+ */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+ STM32F479xx */
+
+#if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM)
+ #error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM "
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+ * @{
+ */
+
+/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
+#define USE_PLL_HSE_EXTC (1) /* Use external clock */
+#define USE_PLL_HSE_XTAL (1) /* Use external xtal */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+ uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+ static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
+#endif
+
+uint8_t SetSysClock_PLL_HSI(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the FPU setting, vector table location and External memory
+ * configuration.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+ #endif
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x24003010;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+ SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+
+ /* Configure the Cube driver */
+ SystemCoreClock = 16000000; // At this stage the HSI is used as system clock
+ HAL_Init();
+
+ /* Configure the System clock source, PLL Multiplier and Divider factors,
+ AHB/APBx prescalers and Flash settings */
+ SetSysClock();
+
+ /* Reset the timer to avoid issues after the RAM initialization */
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+ * depends on the application requirements), user has to ensure that HSE_VALUE
+ * is same as the real frequency of the crystal used. Otherwise, this function
+ * may have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock source */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock source */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock source */
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+ SYSCLK = PLL_VCO / PLL_P
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+ if (pllsource != 0)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+
+ pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+ SystemCoreClock = pllvco/pllp;
+ break;
+ default:
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK frequency --------------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK frequency */
+ SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f4xx.s before jump to main.
+ * This function configures the external memories (SRAM/SDRAM)
+ * This SRAM/SDRAM will be used as program data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+ __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#if defined (DATA_IN_ExtSDRAM)
+ register uint32_t tmpreg = 0, timeout = 0xFFFF;
+ register uint32_t index;
+
+#if defined(STM32F446xx)
+ /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+ clock */
+ RCC->AHB1ENR |= 0x0000007D;
+#else
+ /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
+ clock */
+ RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+#if defined(STM32F446xx)
+ /* Connect PAx pins to FMC Alternate function */
+ GPIOA->AFR[0] |= 0xC0000000;
+ GPIOA->AFR[1] |= 0x00000000;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOA->MODER |= 0x00008000;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOA->OSPEEDR |= 0x00008000;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOA->OTYPER |= 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOA->PUPDR |= 0x00000000;
+
+ /* Connect PCx pins to FMC Alternate function */
+ GPIOC->AFR[0] |= 0x00CC0000;
+ GPIOC->AFR[1] |= 0x00000000;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOC->MODER |= 0x00000A00;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOC->OSPEEDR |= 0x00000A00;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOC->OTYPER |= 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOC->PUPDR |= 0x00000000;
+#endif /* STM32F446xx */
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x000000CC;
+ GPIOD->AFR[1] = 0xCC000CCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xA02A000A;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOD->OSPEEDR = 0xA02A000A;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00000CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA800A;
+ /* Configure PEx pins speed to 50 MHz */
+ GPIOE->OSPEEDR = 0xAAAA800A;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0xCCCCCCCC;
+ GPIOF->AFR[1] = 0xCCCCCCCC;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA800AAA;
+ /* Configure PFx pins speed to 50 MHz */
+ GPIOF->OSPEEDR = 0xAA800AAA;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0xCCCCCCCC;
+ GPIOG->AFR[1] = 0xCCCCCCCC;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0xAAAAAAAA;
+ /* Configure PGx pins speed to 50 MHz */
+ GPIOG->OSPEEDR = 0xAAAAAAAA;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+ /* Connect PHx pins to FMC Alternate function */
+ GPIOH->AFR[0] = 0x00C0CC00;
+ GPIOH->AFR[1] = 0xCCCCCCCC;
+ /* Configure PHx pins in Alternate function mode */
+ GPIOH->MODER = 0xAAAA08A0;
+ /* Configure PHx pins speed to 50 MHz */
+ GPIOH->OSPEEDR = 0xAAAA08A0;
+ /* Configure PHx pins Output type to push-pull */
+ GPIOH->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PHx pins */
+ GPIOH->PUPDR = 0x00000000;
+
+ /* Connect PIx pins to FMC Alternate function */
+ GPIOI->AFR[0] = 0xCCCCCCCC;
+ GPIOI->AFR[1] = 0x00000CC0;
+ /* Configure PIx pins in Alternate function mode */
+ GPIOI->MODER = 0x0028AAAA;
+ /* Configure PIx pins speed to 50 MHz */
+ GPIOI->OSPEEDR = 0x0028AAAA;
+ /* Configure PIx pins Output type to push-pull */
+ GPIOI->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PIx pins */
+ GPIOI->PUPDR = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+/*-- FMC Configuration -------------------------------------------------------*/
+ /* Enable the FMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+ /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else
+ FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+ FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+ /* SDRAM initialization sequence */
+ /* Clock enable command */
+ FMC_Bank5_6->SDCMR = 0x00000011;
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Delay */
+ for (index = 0; index<1000; index++);
+
+ /* PALL command */
+ FMC_Bank5_6->SDCMR = 0x00000012;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Auto refresh command */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCMR = 0x000000F3;
+#else
+ FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* MRD register program */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCMR = 0x00044014;
+#else
+ FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Set refresh count */
+ tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+
+ /* Disable write protection */
+ tmpreg = FMC_Bank5_6->SDCR[0];
+ FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+ /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+ RCC->AHB1ENR |= 0x00000078;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x00CCC0CC;
+ GPIOD->AFR[1] = 0xCCCCCCCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xAAAA0A8A;
+ /* Configure PDx pins speed to 100 MHz */
+ GPIOD->OSPEEDR = 0xFFFF0FCF;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00CC0CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA828A;
+ /* Configure PEx pins speed to 100 MHz */
+ GPIOE->OSPEEDR = 0xFFFFC3CF;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0x00CCCCCC;
+ GPIOF->AFR[1] = 0xCCCC0000;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA000AAA;
+ /* Configure PFx pins speed to 100 MHz */
+ GPIOF->OSPEEDR = 0xFF000FFF;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0x00CCCCCC;
+ GPIOG->AFR[1] = 0x000000C0;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0x00085AAA;
+ /* Configure PGx pins speed to 100 MHz */
+ GPIOG->OSPEEDR = 0x000CAFFF;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+ /* Enable the FMC/FSMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001011;
+ FMC_Bank1->BTCR[3] = 0x00000201;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001091;
+ FMC_Bank1->BTCR[3] = 0x00110212;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FSMC_Bank1->BTCR[2] = 0x00001011;
+ FSMC_Bank1->BTCR[3] = 0x00000201;
+ FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+ (void)(tmp);
+}
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+/**
+ * @brief Configures the System clock source, PLL Multiplier and Divider factors,
+ * AHB/APBx prescalers and Flash settings
+ * @note This function should be called only once the RCC clock configuration
+ * is reset to the default reset state (done in SystemInit() function).
+ * @param None
+ * @retval None
+ */
+void SetSysClock(void)
+{
+ /* 1- Try to start with HSE and external clock */
+#if USE_PLL_HSE_EXTC != 0
+ if (SetSysClock_PLL_HSE(1) == 0)
+#endif
+ {
+ /* 2- If fail try to start with HSE and external xtal */
+ #if USE_PLL_HSE_XTAL != 0
+ if (SetSysClock_PLL_HSE(0) == 0)
+ #endif
+ {
+ /* 3- If fail start with HSI clock */
+ if (SetSysClock_PLL_HSI() == 0)
+ {
+ while(1)
+ {
+ // [TODO] Put something here to tell the user that a problem occured...
+ }
+ }
+ }
+ }
+
+ /* Output clock on MCO2 pin(PC9) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4); // 100 MHz / 4 = 25 MHz
+}
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+/******************************************************************************/
+/* PLL (clocked by HSE) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+
+ /* Enable HSE oscillator and activate PLL with HSE as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+ if (bypass == 0)
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 8 MHz xtal on OSC_IN/OSC_OUT */
+ }
+ else
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 8 MHz clock on OSC_IN */
+ }
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ //RCC_OscInitStruct.PLL.PLLM = 8; // VCO input clock = 1 MHz (8 MHz / 8)
+ //RCC_OscInitStruct.PLL.PLLN = 384; // VCO output clock = 384 MHz (1 MHz * 384)
+ RCC_OscInitStruct.PLL.PLLM = 4; // VCO input clock = 2 MHz (8 MHz / 4)
+ RCC_OscInitStruct.PLL.PLLN = 192; // VCO output clock = 384 MHz (2 MHz * 192)
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 96 MHz (384 MHz / 4)
+ RCC_OscInitStruct.PLL.PLLQ = 8; // USB clock = 48 MHz (384 MHz / 8) --> Good for USB
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 96 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 96 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 48 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 96 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+
+ //if (bypass == 0)
+ // HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz with xtal
+ //else
+ // HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz with external clock
+
+ return 1; // OK
+}
+#endif
+
+/******************************************************************************/
+/* PLL (clocked by HSI) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSI(void)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+
+ /* Enable HSI oscillator and activate PLL with HSI as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
+ RCC_OscInitStruct.HSICalibrationValue = 16;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+ //RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (16 MHz / 16)
+ //RCC_OscInitStruct.PLL.PLLN = 384; // VCO output clock = 384 MHz (1 MHz * 384)
+ RCC_OscInitStruct.PLL.PLLM = 8; // VCO input clock = 2 MHz (16 MHz / 8)
+ RCC_OscInitStruct.PLL.PLLN = 192; // VCO output clock = 384 MHz (2 MHz * 192)
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 96 MHz (384 MHz / 4)
+ RCC_OscInitStruct.PLL.PLLQ = 8; // USB clock = 48 MHz (384 MHz / 8) --> Good for USB
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 96 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 96 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 48 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 96 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
+
+ return 1; // OK
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/system_stm32f4xx.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,123 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.4.1
+ * @date 09-October-2015
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F4XX_H
+#define __SYSTEM_STM32F4XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F4xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F4xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F4XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_conf_template.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,436 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_conf_template.h
+ * @author MCD Application Team
+ * @version V1.4.1
+ * @date 09-October-2015
+ * @brief HAL configuration template file.
+ * This file should be copied to the application folder and renamed
+ * to stm32f4xx_hal_conf.h.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_DSI_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_FMPI2C_MODULE_ENABLED
+#define HAL_SPDIFRX_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature.*/
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 1
+#define DATA_CACHE_ENABLE 1
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1 */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2
+#define MAC_ADDR1 0
+#define MAC_ADDR2 0
+#define MAC_ADDR3 0
+#define MAC_ADDR4 0
+#define MAC_ADDR5 0
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS 0x01
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY ((uint32_t)0x000000FF)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
+
+#define PHY_READ_TO ((uint32_t)0x0000FFFF)
+#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */
+#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */
+#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
+#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
+
+#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
+#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
+
+#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
+#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_msp_template.c Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,119 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_msp_template.c
+ * @author MCD Application Team
+ * @version V1.4.1
+ * @date 09-October-2015
+ * @brief This file contains the HAL System and Peripheral (PPP) MSP initialization
+ * and de-initialization functions.
+ * It should be copied to the application folder and renamed into 'stm32f4xx_hal_msp.c'.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HAL_MSP HAL MSP
+ * @brief HAL MSP module.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_MSP_Private_Functions HAL MSP Private Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the Global MSP.
+ * @note This function is called from HAL_Init() function to perform system
+ * level initialization (GPIOs, clock, DMA, interrupt).
+ * @retval None
+ */
+void HAL_MspInit(void)
+{
+
+}
+
+/**
+ * @brief DeInitializes the Global MSP.
+ * @note This functiona is called from HAL_DeInit() function to perform system
+ * level de-initialization (GPIOs, clock, DMA, interrupt).
+ * @retval None
+ */
+void HAL_MspDeInit(void)
+{
+
+}
+
+/**
+ * @brief Initializes the PPP MSP.
+ * @note This functiona is called from HAL_PPP_Init() function to perform
+ * peripheral(PPP) system level initialization (GPIOs, clock, DMA, interrupt)
+ * @retval None
+ */
+void HAL_PPP_MspInit(void)
+{
+
+}
+
+/**
+ * @brief DeInitializes the PPP MSP.
+ * @note This functiona is called from HAL_PPP_DeInit() function to perform
+ * peripheral(PPP) system level de-initialization (GPIOs, clock, DMA, interrupt)
+ * @retval None
+ */
+void HAL_PPP_MspDeInit(void)
+{
+
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/arm_common_tables.h Fri Nov 20 10:00:12 2015 +0000 @@ -0,0 +1,136 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2014 ARM Limited. All rights reserved. +* +* $Date: 19. March 2015 +* $Revision: V.1.4.5 +* +* Project: CMSIS DSP Library +* Title: arm_common_tables.h +* +* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions +* +* Target Processor: Cortex-M4/Cortex-M3 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +* -------------------------------------------------------------------- */ + +#ifndef _ARM_COMMON_TABLES_H +#define _ARM_COMMON_TABLES_H + +#include "arm_math.h" + +extern const uint16_t armBitRevTable[1024]; +extern const q15_t armRecipTableQ15[64]; +extern const q31_t armRecipTableQ31[64]; +//extern const q31_t realCoefAQ31[1024]; +//extern const q31_t realCoefBQ31[1024]; +extern const float32_t twiddleCoef_16[32]; +extern const float32_t twiddleCoef_32[64]; +extern const float32_t twiddleCoef_64[128]; +extern const float32_t twiddleCoef_128[256]; +extern const float32_t twiddleCoef_256[512]; +extern const float32_t twiddleCoef_512[1024]; +extern const float32_t twiddleCoef_1024[2048]; +extern const float32_t twiddleCoef_2048[4096]; +extern const float32_t twiddleCoef_4096[8192]; +#define twiddleCoef twiddleCoef_4096 +extern const q31_t twiddleCoef_16_q31[24]; +extern const q31_t twiddleCoef_32_q31[48]; +extern const q31_t twiddleCoef_64_q31[96]; +extern const q31_t twiddleCoef_128_q31[192]; +extern const q31_t twiddleCoef_256_q31[384]; +extern const q31_t twiddleCoef_512_q31[768]; +extern const q31_t twiddleCoef_1024_q31[1536]; +extern const q31_t twiddleCoef_2048_q31[3072]; +extern const q31_t twiddleCoef_4096_q31[6144]; +extern const q15_t twiddleCoef_16_q15[24]; +extern const q15_t twiddleCoef_32_q15[48]; +extern const q15_t twiddleCoef_64_q15[96]; +extern const q15_t twiddleCoef_128_q15[192]; +extern const q15_t twiddleCoef_256_q15[384]; +extern const q15_t twiddleCoef_512_q15[768]; +extern const q15_t twiddleCoef_1024_q15[1536]; +extern const q15_t twiddleCoef_2048_q15[3072]; +extern const q15_t twiddleCoef_4096_q15[6144]; +extern const float32_t twiddleCoef_rfft_32[32]; +extern const float32_t twiddleCoef_rfft_64[64]; +extern const float32_t twiddleCoef_rfft_128[128]; +extern const float32_t twiddleCoef_rfft_256[256]; +extern const float32_t twiddleCoef_rfft_512[512]; +extern const float32_t twiddleCoef_rfft_1024[1024]; +extern const float32_t twiddleCoef_rfft_2048[2048]; +extern const float32_t twiddleCoef_rfft_4096[4096]; + + +/* floating-point bit reversal tables */ +#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20 ) +#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48 ) +#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56 ) +#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 ) +#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 ) +#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 ) +#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800) +#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808) +#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032) + +extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH]; + +/* fixed-point bit reversal tables */ +#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12 ) +#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24 ) +#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56 ) +#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 ) +#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 ) +#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 ) +#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 ) +#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984) +#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032) + +extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH]; + +/* Tables for Fast Math Sine and Cosine */ +extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1]; +extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1]; +extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1]; + +#endif /* ARM_COMMON_TABLES_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/arm_const_structs.h Fri Nov 20 10:00:12 2015 +0000 @@ -0,0 +1,79 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2014 ARM Limited. All rights reserved. +* +* $Date: 19. March 2015 +* $Revision: V.1.4.5 +* +* Project: CMSIS DSP Library +* Title: arm_const_structs.h +* +* Description: This file has constant structs that are initialized for +* user convenience. For example, some can be given as +* arguments to the arm_cfft_f32() function. +* +* Target Processor: Cortex-M4/Cortex-M3 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +* -------------------------------------------------------------------- */ + +#ifndef _ARM_CONST_STRUCTS_H +#define _ARM_CONST_STRUCTS_H + +#include "arm_math.h" +#include "arm_common_tables.h" + + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096; + + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096; + + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/arm_math.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,7556 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+*
+* $Date: 19. March 2015
+* $Revision: V.1.4.5
+*
+* Project: CMSIS DSP Library
+* Title: arm_math.h
+*
+* Description: Public header file for CMSIS DSP Library
+*
+* Target Processor: Cortex-M7/Cortex-M4/Cortex-M3/Cortex-M0
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+ * -------------------------------------------------------------------- */
+
+/**
+ \mainpage CMSIS DSP Software Library
+ *
+ * Introduction
+ * ------------
+ *
+ * This user manual describes the CMSIS DSP software library,
+ * a suite of common signal processing functions for use on Cortex-M processor based devices.
+ *
+ * The library is divided into a number of functions each covering a specific category:
+ * - Basic math functions
+ * - Fast math functions
+ * - Complex math functions
+ * - Filters
+ * - Matrix functions
+ * - Transforms
+ * - Motor control functions
+ * - Statistical functions
+ * - Support functions
+ * - Interpolation functions
+ *
+ * The library has separate functions for operating on 8-bit integers, 16-bit integers,
+ * 32-bit integer and 32-bit floating-point values.
+ *
+ * Using the Library
+ * ------------
+ *
+ * The library installer contains prebuilt versions of the libraries in the <code>Lib</code> folder.
+ * - arm_cortexM7lfdp_math.lib (Little endian and Double Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7bfdp_math.lib (Big endian and Double Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7lfsp_math.lib (Little endian and Single Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7bfsp_math.lib (Big endian and Single Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7l_math.lib (Little endian on Cortex-M7)
+ * - arm_cortexM7b_math.lib (Big endian on Cortex-M7)
+ * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4l_math.lib (Little endian on Cortex-M4)
+ * - arm_cortexM4b_math.lib (Big endian on Cortex-M4)
+ * - arm_cortexM3l_math.lib (Little endian on Cortex-M3)
+ * - arm_cortexM3b_math.lib (Big endian on Cortex-M3)
+ * - arm_cortexM0l_math.lib (Little endian on Cortex-M0 / CortexM0+)
+ * - arm_cortexM0b_math.lib (Big endian on Cortex-M0 / CortexM0+)
+ *
+ * The library functions are declared in the public file <code>arm_math.h</code> which is placed in the <code>Include</code> folder.
+ * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single
+ * public header file <code> arm_math.h</code> for Cortex-M7/M4/M3/M0/M0+ with little endian and big endian. Same header file will be used for floating point unit(FPU) variants.
+ * Define the appropriate pre processor MACRO ARM_MATH_CM7 or ARM_MATH_CM4 or ARM_MATH_CM3 or
+ * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application.
+ *
+ * Examples
+ * --------
+ *
+ * The library ships with a number of examples which demonstrate how to use the library functions.
+ *
+ * Toolchain Support
+ * ------------
+ *
+ * The library has been developed and tested with MDK-ARM version 5.14.0.0
+ * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly.
+ *
+ * Building the Library
+ * ------------
+ *
+ * The library installer contains a project file to re build libraries on MDK-ARM Tool chain in the <code>CMSIS\\DSP_Lib\\Source\\ARM</code> folder.
+ * - arm_cortexM_math.uvprojx
+ *
+ *
+ * The libraries can be built by opening the arm_cortexM_math.uvprojx project in MDK-ARM, selecting a specific target, and defining the optional pre processor MACROs detailed above.
+ *
+ * Pre-processor Macros
+ * ------------
+ *
+ * Each library project have differant pre-processor macros.
+ *
+ * - UNALIGNED_SUPPORT_DISABLE:
+ *
+ * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access
+ *
+ * - ARM_MATH_BIG_ENDIAN:
+ *
+ * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets.
+ *
+ * - ARM_MATH_MATRIX_CHECK:
+ *
+ * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices
+ *
+ * - ARM_MATH_ROUNDING:
+ *
+ * Define macro ARM_MATH_ROUNDING for rounding on support functions
+ *
+ * - ARM_MATH_CMx:
+ *
+ * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target
+ * and ARM_MATH_CM0 for building library on Cortex-M0 target, ARM_MATH_CM0PLUS for building library on Cortex-M0+ target, and
+ * ARM_MATH_CM7 for building the library on cortex-M7.
+ *
+ * - __FPU_PRESENT:
+ *
+ * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries
+ *
+ * <hr>
+ * CMSIS-DSP in ARM::CMSIS Pack
+ * -----------------------------
+ *
+ * The following files relevant to CMSIS-DSP are present in the <b>ARM::CMSIS</b> Pack directories:
+ * |File/Folder |Content |
+ * |------------------------------|------------------------------------------------------------------------|
+ * |\b CMSIS\\Documentation\\DSP | This documentation |
+ * |\b CMSIS\\DSP_Lib | Software license agreement (license.txt) |
+ * |\b CMSIS\\DSP_Lib\\Examples | Example projects demonstrating the usage of the library functions |
+ * |\b CMSIS\\DSP_Lib\\Source | Source files for rebuilding the library |
+ *
+ * <hr>
+ * Revision History of CMSIS-DSP
+ * ------------
+ * Please refer to \ref ChangeLog_pg.
+ *
+ * Copyright Notice
+ * ------------
+ *
+ * Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+ */
+
+
+/**
+ * @defgroup groupMath Basic Math Functions
+ */
+
+/**
+ * @defgroup groupFastMath Fast Math Functions
+ * This set of functions provides a fast approximation to sine, cosine, and square root.
+ * As compared to most of the other functions in the CMSIS math library, the fast math functions
+ * operate on individual values and not arrays.
+ * There are separate functions for Q15, Q31, and floating-point data.
+ *
+ */
+
+/**
+ * @defgroup groupCmplxMath Complex Math Functions
+ * This set of functions operates on complex data vectors.
+ * The data in the complex arrays is stored in an interleaved fashion
+ * (real, imag, real, imag, ...).
+ * In the API functions, the number of samples in a complex array refers
+ * to the number of complex values; the array contains twice this number of
+ * real values.
+ */
+
+/**
+ * @defgroup groupFilters Filtering Functions
+ */
+
+/**
+ * @defgroup groupMatrix Matrix Functions
+ *
+ * This set of functions provides basic matrix math operations.
+ * The functions operate on matrix data structures. For example,
+ * the type
+ * definition for the floating-point matrix structure is shown
+ * below:
+ * <pre>
+ * typedef struct
+ * {
+ * uint16_t numRows; // number of rows of the matrix.
+ * uint16_t numCols; // number of columns of the matrix.
+ * float32_t *pData; // points to the data of the matrix.
+ * } arm_matrix_instance_f32;
+ * </pre>
+ * There are similar definitions for Q15 and Q31 data types.
+ *
+ * The structure specifies the size of the matrix and then points to
+ * an array of data. The array is of size <code>numRows X numCols</code>
+ * and the values are arranged in row order. That is, the
+ * matrix element (i, j) is stored at:
+ * <pre>
+ * pData[i*numCols + j]
+ * </pre>
+ *
+ * \par Init Functions
+ * There is an associated initialization function for each type of matrix
+ * data structure.
+ * The initialization function sets the values of the internal structure fields.
+ * Refer to the function <code>arm_mat_init_f32()</code>, <code>arm_mat_init_q31()</code>
+ * and <code>arm_mat_init_q15()</code> for floating-point, Q31 and Q15 types, respectively.
+ *
+ * \par
+ * Use of the initialization function is optional. However, if initialization function is used
+ * then the instance structure cannot be placed into a const data section.
+ * To place the instance structure in a const data
+ * section, manually initialize the data structure. For example:
+ * <pre>
+ * <code>arm_matrix_instance_f32 S = {nRows, nColumns, pData};</code>
+ * <code>arm_matrix_instance_q31 S = {nRows, nColumns, pData};</code>
+ * <code>arm_matrix_instance_q15 S = {nRows, nColumns, pData};</code>
+ * </pre>
+ * where <code>nRows</code> specifies the number of rows, <code>nColumns</code>
+ * specifies the number of columns, and <code>pData</code> points to the
+ * data array.
+ *
+ * \par Size Checking
+ * By default all of the matrix functions perform size checking on the input and
+ * output matrices. For example, the matrix addition function verifies that the
+ * two input matrices and the output matrix all have the same number of rows and
+ * columns. If the size check fails the functions return:
+ * <pre>
+ * ARM_MATH_SIZE_MISMATCH
+ * </pre>
+ * Otherwise the functions return
+ * <pre>
+ * ARM_MATH_SUCCESS
+ * </pre>
+ * There is some overhead associated with this matrix size checking.
+ * The matrix size checking is enabled via the \#define
+ * <pre>
+ * ARM_MATH_MATRIX_CHECK
+ * </pre>
+ * within the library project settings. By default this macro is defined
+ * and size checking is enabled. By changing the project settings and
+ * undefining this macro size checking is eliminated and the functions
+ * run a bit faster. With size checking disabled the functions always
+ * return <code>ARM_MATH_SUCCESS</code>.
+ */
+
+/**
+ * @defgroup groupTransforms Transform Functions
+ */
+
+/**
+ * @defgroup groupController Controller Functions
+ */
+
+/**
+ * @defgroup groupStats Statistics Functions
+ */
+/**
+ * @defgroup groupSupport Support Functions
+ */
+
+/**
+ * @defgroup groupInterpolation Interpolation Functions
+ * These functions perform 1- and 2-dimensional interpolation of data.
+ * Linear interpolation is used for 1-dimensional data and
+ * bilinear interpolation is used for 2-dimensional data.
+ */
+
+/**
+ * @defgroup groupExamples Examples
+ */
+#ifndef _ARM_MATH_H
+#define _ARM_MATH_H
+
+#define __CMSIS_GENERIC /* disable NVIC and Systick functions */
+
+#if defined(ARM_MATH_CM7)
+ #include "core_cm7.h"
+#elif defined (ARM_MATH_CM4)
+ #include "core_cm4.h"
+#elif defined (ARM_MATH_CM3)
+ #include "core_cm3.h"
+#elif defined (ARM_MATH_CM0)
+ #include "core_cm0.h"
+#define ARM_MATH_CM0_FAMILY
+ #elif defined (ARM_MATH_CM0PLUS)
+#include "core_cm0plus.h"
+ #define ARM_MATH_CM0_FAMILY
+#else
+ #error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0"
+#endif
+
+#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */
+#include "string.h"
+#include "math.h"
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+
+ /**
+ * @brief Macros required for reciprocal calculation in Normalized LMS
+ */
+
+#define DELTA_Q31 (0x100)
+#define DELTA_Q15 0x5
+#define INDEX_MASK 0x0000003F
+#ifndef PI
+#define PI 3.14159265358979f
+#endif
+
+ /**
+ * @brief Macros required for SINE and COSINE Fast math approximations
+ */
+
+#define FAST_MATH_TABLE_SIZE 512
+#define FAST_MATH_Q31_SHIFT (32 - 10)
+#define FAST_MATH_Q15_SHIFT (16 - 10)
+#define CONTROLLER_Q31_SHIFT (32 - 9)
+#define TABLE_SIZE 256
+#define TABLE_SPACING_Q31 0x400000
+#define TABLE_SPACING_Q15 0x80
+
+ /**
+ * @brief Macros required for SINE and COSINE Controller functions
+ */
+ /* 1.31(q31) Fixed value of 2/360 */
+ /* -1 to +1 is divided into 360 values so total spacing is (2/360) */
+#define INPUT_SPACING 0xB60B61
+
+ /**
+ * @brief Macro for Unaligned Support
+ */
+#ifndef UNALIGNED_SUPPORT_DISABLE
+ #define ALIGN4
+#else
+ #if defined (__GNUC__)
+ #define ALIGN4 __attribute__((aligned(4)))
+ #else
+ #define ALIGN4 __align(4)
+ #endif
+#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */
+
+ /**
+ * @brief Error status returned by some functions in the library.
+ */
+
+ typedef enum
+ {
+ ARM_MATH_SUCCESS = 0, /**< No error */
+ ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */
+ ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */
+ ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */
+ ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */
+ ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */
+ ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */
+ } arm_status;
+
+ /**
+ * @brief 8-bit fractional data type in 1.7 format.
+ */
+ typedef int8_t q7_t;
+
+ /**
+ * @brief 16-bit fractional data type in 1.15 format.
+ */
+ typedef int16_t q15_t;
+
+ /**
+ * @brief 32-bit fractional data type in 1.31 format.
+ */
+ typedef int32_t q31_t;
+
+ /**
+ * @brief 64-bit fractional data type in 1.63 format.
+ */
+ typedef int64_t q63_t;
+
+ /**
+ * @brief 32-bit floating-point type definition.
+ */
+ typedef float float32_t;
+
+ /**
+ * @brief 64-bit floating-point type definition.
+ */
+ typedef double float64_t;
+
+ /**
+ * @brief definition to read/write two 16 bit values.
+ */
+#if defined __CC_ARM
+ #define __SIMD32_TYPE int32_t __packed
+ #define CMSIS_UNUSED __attribute__((unused))
+#elif defined __ICCARM__
+ #define __SIMD32_TYPE int32_t __packed
+ #define CMSIS_UNUSED
+#elif defined __GNUC__
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED __attribute__((unused))
+#elif defined __CSMC__ /* Cosmic */
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED
+#elif defined __TASKING__
+ #define __SIMD32_TYPE __unaligned int32_t
+ #define CMSIS_UNUSED
+#else
+ #error Unknown compiler
+#endif
+
+#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr))
+#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr))
+
+#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *) (addr))
+
+#define __SIMD64(addr) (*(int64_t **) & (addr))
+
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+ /**
+ * @brief definition to pack two 16 bit values.
+ */
+#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \
+ (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) )
+#define __PKHTB(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \
+ (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF) )
+
+#endif
+
+
+ /**
+ * @brief definition to pack four 8 bit values.
+ */
+#ifndef ARM_MATH_BIG_ENDIAN
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v3) << 24) & (int32_t)0xFF000000) )
+#else
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v0) << 24) & (int32_t)0xFF000000) )
+
+#endif
+
+
+ /**
+ * @brief Clips Q63 to Q31 values.
+ */
+ static __INLINE q31_t clip_q63_to_q31(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x;
+ }
+
+ /**
+ * @brief Clips Q63 to Q15 values.
+ */
+ static __INLINE q15_t clip_q63_to_q15(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15);
+ }
+
+ /**
+ * @brief Clips Q31 to Q7 values.
+ */
+ static __INLINE q7_t clip_q31_to_q7(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ?
+ ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x;
+ }
+
+ /**
+ * @brief Clips Q31 to Q15 values.
+ */
+ static __INLINE q15_t clip_q31_to_q15(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x;
+ }
+
+ /**
+ * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format.
+ */
+
+ static __INLINE q63_t mult32x64(
+ q63_t x,
+ q31_t y)
+ {
+ return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) +
+ (((q63_t) (x >> 32) * y)));
+ }
+
+
+//#if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM )
+//#define __CLZ __clz
+//#endif
+
+//note: function can be removed when all toolchain support __CLZ for Cortex-M0
+#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__)) )
+
+ static __INLINE uint32_t __CLZ(
+ q31_t data);
+
+
+ static __INLINE uint32_t __CLZ(
+ q31_t data)
+ {
+ uint32_t count = 0;
+ uint32_t mask = 0x80000000;
+
+ while((data & mask) == 0)
+ {
+ count += 1u;
+ mask = mask >> 1u;
+ }
+
+ return (count);
+
+ }
+
+#endif
+
+ /**
+ * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type.
+ */
+
+ static __INLINE uint32_t arm_recip_q31(
+ q31_t in,
+ q31_t * dst,
+ q31_t * pRecipTable)
+ {
+
+ uint32_t out, tempVal;
+ uint32_t index, i;
+ uint32_t signBits;
+
+ if(in > 0)
+ {
+ signBits = __CLZ(in) - 1;
+ }
+ else
+ {
+ signBits = __CLZ(-in) - 1;
+ }
+
+ /* Convert input sample to 1.31 format */
+ in = in << signBits;
+
+ /* calculation of index for initial approximated Val */
+ index = (uint32_t) (in >> 24u);
+ index = (index & INDEX_MASK);
+
+ /* 1.31 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0u; i < 2u; i++)
+ {
+ tempVal = (q31_t) (((q63_t) in * out) >> 31u);
+ tempVal = 0x7FFFFFFF - tempVal;
+ /* 1.31 with exp 1 */
+ //out = (q31_t) (((q63_t) out * tempVal) >> 30u);
+ out = (q31_t) clip_q63_to_q31(((q63_t) out * tempVal) >> 30u);
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1u);
+
+ }
+
+ /**
+ * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type.
+ */
+ static __INLINE uint32_t arm_recip_q15(
+ q15_t in,
+ q15_t * dst,
+ q15_t * pRecipTable)
+ {
+
+ uint32_t out = 0, tempVal = 0;
+ uint32_t index = 0, i = 0;
+ uint32_t signBits = 0;
+
+ if(in > 0)
+ {
+ signBits = __CLZ(in) - 17;
+ }
+ else
+ {
+ signBits = __CLZ(-in) - 17;
+ }
+
+ /* Convert input sample to 1.15 format */
+ in = in << signBits;
+
+ /* calculation of index for initial approximated Val */
+ index = in >> 8;
+ index = (index & INDEX_MASK);
+
+ /* 1.15 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0; i < 2; i++)
+ {
+ tempVal = (q15_t) (((q31_t) in * out) >> 15);
+ tempVal = 0x7FFF - tempVal;
+ /* 1.15 with exp 1 */
+ out = (q15_t) (((q31_t) out * tempVal) >> 14);
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1);
+
+ }
+
+
+ /*
+ * @brief C custom defined intrinisic function for only M0 processors
+ */
+#if defined(ARM_MATH_CM0_FAMILY)
+
+ static __INLINE q31_t __SSAT(
+ q31_t x,
+ uint32_t y)
+ {
+ int32_t posMax, negMin;
+ uint32_t i;
+
+ posMax = 1;
+ for (i = 0; i < (y - 1); i++)
+ {
+ posMax = posMax * 2;
+ }
+
+ if(x > 0)
+ {
+ posMax = (posMax - 1);
+
+ if(x > posMax)
+ {
+ x = posMax;
+ }
+ }
+ else
+ {
+ negMin = -posMax;
+
+ if(x < negMin)
+ {
+ x = negMin;
+ }
+ }
+ return (x);
+
+
+ }
+
+#endif /* end of ARM_MATH_CM0_FAMILY */
+
+
+
+ /*
+ * @brief C custom defined intrinsic function for M3 and M0 processors
+ */
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+
+ /*
+ * @brief C custom defined QADD8 for M3 and M0 processors
+ */
+ static __INLINE q31_t __QADD8(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q7_t r, s, t, u;
+
+ r = (q7_t) x;
+ s = (q7_t) y;
+
+ r = __SSAT((q31_t) (r + s), 8);
+ s = __SSAT(((q31_t) (((x << 16) >> 24) + ((y << 16) >> 24))), 8);
+ t = __SSAT(((q31_t) (((x << 8) >> 24) + ((y << 8) >> 24))), 8);
+ u = __SSAT(((q31_t) ((x >> 24) + (y >> 24))), 8);
+
+ sum =
+ (((q31_t) u << 24) & 0xFF000000) | (((q31_t) t << 16) & 0x00FF0000) |
+ (((q31_t) s << 8) & 0x0000FF00) | (r & 0x000000FF);
+
+ return sum;
+
+ }
+
+ /*
+ * @brief C custom defined QSUB8 for M3 and M0 processors
+ */
+ static __INLINE q31_t __QSUB8(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s, t, u;
+
+ r = (q7_t) x;
+ s = (q7_t) y;
+
+ r = __SSAT((r - s), 8);
+ s = __SSAT(((q31_t) (((x << 16) >> 24) - ((y << 16) >> 24))), 8) << 8;
+ t = __SSAT(((q31_t) (((x << 8) >> 24) - ((y << 8) >> 24))), 8) << 16;
+ u = __SSAT(((q31_t) ((x >> 24) - (y >> 24))), 8) << 24;
+
+ sum =
+ (u & 0xFF000000) | (t & 0x00FF0000) | (s & 0x0000FF00) | (r &
+ 0x000000FF);
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined QADD16 for M3 and M0 processors
+ */
+
+ /*
+ * @brief C custom defined QADD16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __QADD16(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (q15_t) x;
+ s = (q15_t) y;
+
+ r = __SSAT(r + s, 16);
+ s = __SSAT(((q31_t) ((x >> 16) + (y >> 16))), 16) << 16;
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+
+ }
+
+ /*
+ * @brief C custom defined SHADD16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __SHADD16(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (q15_t) x;
+ s = (q15_t) y;
+
+ r = ((r >> 1) + (s >> 1));
+ s = ((q31_t) ((x >> 17) + (y >> 17))) << 16;
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+
+ }
+
+ /*
+ * @brief C custom defined QSUB16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __QSUB16(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (q15_t) x;
+ s = (q15_t) y;
+
+ r = __SSAT(r - s, 16);
+ s = __SSAT(((q31_t) ((x >> 16) - (y >> 16))), 16) << 16;
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined SHSUB16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __SHSUB16(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t diff;
+ q31_t r, s;
+
+ r = (q15_t) x;
+ s = (q15_t) y;
+
+ r = ((r >> 1) - (s >> 1));
+ s = (((x >> 17) - (y >> 17)) << 16);
+
+ diff = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return diff;
+ }
+
+ /*
+ * @brief C custom defined QASX for M3 and M0 processors
+ */
+ static __INLINE q31_t __QASX(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum = 0;
+
+ sum =
+ ((sum +
+ clip_q31_to_q15((q31_t) ((q15_t) (x >> 16) + (q15_t) y))) << 16) +
+ clip_q31_to_q15((q31_t) ((q15_t) x - (q15_t) (y >> 16)));
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined SHASX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SHASX(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (q15_t) x;
+ s = (q15_t) y;
+
+ r = ((r >> 1) - (y >> 17));
+ s = (((x >> 17) + (s >> 1)) << 16);
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+ }
+
+
+ /*
+ * @brief C custom defined QSAX for M3 and M0 processors
+ */
+ static __INLINE q31_t __QSAX(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum = 0;
+
+ sum =
+ ((sum +
+ clip_q31_to_q15((q31_t) ((q15_t) (x >> 16) - (q15_t) y))) << 16) +
+ clip_q31_to_q15((q31_t) ((q15_t) x + (q15_t) (y >> 16)));
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined SHSAX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SHSAX(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (q15_t) x;
+ s = (q15_t) y;
+
+ r = ((r >> 1) + (y >> 17));
+ s = (((x >> 17) - (s >> 1)) << 16);
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined SMUSDX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMUSDX(
+ q31_t x,
+ q31_t y)
+ {
+
+ return ((q31_t) (((q15_t) x * (q15_t) (y >> 16)) -
+ ((q15_t) (x >> 16) * (q15_t) y)));
+ }
+
+ /*
+ * @brief C custom defined SMUADX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMUADX(
+ q31_t x,
+ q31_t y)
+ {
+
+ return ((q31_t) (((q15_t) x * (q15_t) (y >> 16)) +
+ ((q15_t) (x >> 16) * (q15_t) y)));
+ }
+
+ /*
+ * @brief C custom defined QADD for M3 and M0 processors
+ */
+ static __INLINE q31_t __QADD(
+ q31_t x,
+ q31_t y)
+ {
+ return clip_q63_to_q31((q63_t) x + y);
+ }
+
+ /*
+ * @brief C custom defined QSUB for M3 and M0 processors
+ */
+ static __INLINE q31_t __QSUB(
+ q31_t x,
+ q31_t y)
+ {
+ return clip_q63_to_q31((q63_t) x - y);
+ }
+
+ /*
+ * @brief C custom defined SMLAD for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMLAD(
+ q31_t x,
+ q31_t y,
+ q31_t sum)
+ {
+
+ return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) +
+ ((q15_t) x * (q15_t) y));
+ }
+
+ /*
+ * @brief C custom defined SMLADX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMLADX(
+ q31_t x,
+ q31_t y,
+ q31_t sum)
+ {
+
+ return (sum + ((q15_t) (x >> 16) * (q15_t) (y)) +
+ ((q15_t) x * (q15_t) (y >> 16)));
+ }
+
+ /*
+ * @brief C custom defined SMLSDX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMLSDX(
+ q31_t x,
+ q31_t y,
+ q31_t sum)
+ {
+
+ return (sum - ((q15_t) (x >> 16) * (q15_t) (y)) +
+ ((q15_t) x * (q15_t) (y >> 16)));
+ }
+
+ /*
+ * @brief C custom defined SMLALD for M3 and M0 processors
+ */
+ static __INLINE q63_t __SMLALD(
+ q31_t x,
+ q31_t y,
+ q63_t sum)
+ {
+
+ return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) +
+ ((q15_t) x * (q15_t) y));
+ }
+
+ /*
+ * @brief C custom defined SMLALDX for M3 and M0 processors
+ */
+ static __INLINE q63_t __SMLALDX(
+ q31_t x,
+ q31_t y,
+ q63_t sum)
+ {
+
+ return (sum + ((q15_t) (x >> 16) * (q15_t) y)) +
+ ((q15_t) x * (q15_t) (y >> 16));
+ }
+
+ /*
+ * @brief C custom defined SMUAD for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMUAD(
+ q31_t x,
+ q31_t y)
+ {
+
+ return (((x >> 16) * (y >> 16)) +
+ (((x << 16) >> 16) * ((y << 16) >> 16)));
+ }
+
+ /*
+ * @brief C custom defined SMUSD for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMUSD(
+ q31_t x,
+ q31_t y)
+ {
+
+ return (-((x >> 16) * (y >> 16)) +
+ (((x << 16) >> 16) * ((y << 16) >> 16)));
+ }
+
+
+ /*
+ * @brief C custom defined SXTB16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __SXTB16(
+ q31_t x)
+ {
+
+ return ((((x << 24) >> 24) & 0x0000FFFF) |
+ (((x << 8) >> 8) & 0xFFFF0000));
+ }
+
+
+#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */
+
+
+ /**
+ * @brief Instance structure for the Q7 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q7;
+
+ /**
+ * @brief Instance structure for the Q15 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q7 FIR filter.
+ * @param[in] *S points to an instance of the Q7 FIR filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_q7(
+ const arm_fir_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q7 FIR filter.
+ * @param[in,out] *S points to an instance of the Q7 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed.
+ * @return none
+ */
+ void arm_fir_init_q7(
+ arm_fir_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR filter.
+ * @param[in] *S points to an instance of the Q15 FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q15 FIR filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_fast_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q15 FIR filter.
+ * @param[in,out] *S points to an instance of the Q15 FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if
+ * <code>numTaps</code> is not a supported value.
+ */
+
+ arm_status arm_fir_init_q15(
+ arm_fir_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR filter.
+ * @param[in] *S points to an instance of the Q31 FIR filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q31 FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_fast_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 FIR filter.
+ * @param[in,out] *S points to an instance of the Q31 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return none.
+ */
+ void arm_fir_init_q31(
+ arm_fir_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the floating-point FIR filter.
+ * @param[in] *S points to an instance of the floating-point FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_f32(
+ const arm_fir_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point FIR filter.
+ * @param[in,out] *S points to an instance of the floating-point FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return none.
+ */
+ void arm_fir_init_f32(
+ arm_fir_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+
+ } arm_biquad_casd_df1_inst_q15;
+
+
+ /**
+ * @brief Instance structure for the Q31 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+
+ } arm_biquad_casd_df1_inst_q31;
+
+ /**
+ * @brief Instance structure for the floating-point Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+
+
+ } arm_biquad_casd_df1_inst_f32;
+
+
+
+ /**
+ * @brief Processing function for the Q15 Biquad cascade filter.
+ * @param[in] *S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q15 Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ * @return none
+ */
+
+ void arm_biquad_cascade_df1_init_q15(
+ arm_biquad_casd_df1_inst_q15 * S,
+ uint8_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int8_t postShift);
+
+
+ /**
+ * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_fast_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 Biquad cascade filter
+ * @param[in] *S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_fast_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ * @return none
+ */
+
+ void arm_biquad_cascade_df1_init_q31(
+ arm_biquad_casd_df1_inst_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int8_t postShift);
+
+ /**
+ * @brief Processing function for the floating-point Biquad cascade filter.
+ * @param[in] *S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_f32(
+ const arm_biquad_casd_df1_inst_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @return none
+ */
+
+ void arm_biquad_cascade_df1_init_f32(
+ arm_biquad_casd_df1_inst_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float32_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f32;
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float64_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f64;
+
+ /**
+ * @brief Instance structure for the Q15 matrix structure.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q15_t *pData; /**< points to the data of the matrix. */
+
+ } arm_matrix_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 matrix structure.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q31_t *pData; /**< points to the data of the matrix. */
+
+ } arm_matrix_instance_q31;
+
+
+
+ /**
+ * @brief Floating-point matrix addition.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_add_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15 matrix addition.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_add_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+ /**
+ * @brief Q31 matrix addition.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_add_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+ /**
+ * @brief Floating-point, complex, matrix multiplication.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_cmplx_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15, complex, matrix multiplication.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_cmplx_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pScratch);
+
+ /**
+ * @brief Q31, complex, matrix multiplication.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_cmplx_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix transpose.
+ * @param[in] *pSrc points to the input matrix
+ * @param[out] *pDst points to the output matrix
+ * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code>
+ * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_trans_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix transpose.
+ * @param[in] *pSrc points to the input matrix
+ * @param[out] *pDst points to the output matrix
+ * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code>
+ * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_trans_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ arm_matrix_instance_q15 * pDst);
+
+ /**
+ * @brief Q31 matrix transpose.
+ * @param[in] *pSrc points to the input matrix
+ * @param[out] *pDst points to the output matrix
+ * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code>
+ * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_trans_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix multiplication
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15 matrix multiplication
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @param[in] *pState points to the array for storing intermediate results
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+ /**
+ * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @param[in] *pState points to the array for storing intermediate results
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_fast_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+ /**
+ * @brief Q31 matrix multiplication
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+ /**
+ * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_fast_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix subtraction
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_sub_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15 matrix subtraction
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_sub_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+ /**
+ * @brief Q31 matrix subtraction
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_sub_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+ /**
+ * @brief Floating-point matrix scaling.
+ * @param[in] *pSrc points to the input matrix
+ * @param[in] scale scale factor
+ * @param[out] *pDst points to the output matrix
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_scale_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ float32_t scale,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15 matrix scaling.
+ * @param[in] *pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to output matrix
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_scale_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ q15_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q15 * pDst);
+
+ /**
+ * @brief Q31 matrix scaling.
+ * @param[in] *pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_scale_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ q31_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Q31 matrix initialization.
+ * @param[in,out] *S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] *pData points to the matrix data array.
+ * @return none
+ */
+
+ void arm_mat_init_q31(
+ arm_matrix_instance_q31 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q31_t * pData);
+
+ /**
+ * @brief Q15 matrix initialization.
+ * @param[in,out] *S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] *pData points to the matrix data array.
+ * @return none
+ */
+
+ void arm_mat_init_q15(
+ arm_matrix_instance_q15 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q15_t * pData);
+
+ /**
+ * @brief Floating-point matrix initialization.
+ * @param[in,out] *S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] *pData points to the matrix data array.
+ * @return none
+ */
+
+ void arm_mat_init_f32(
+ arm_matrix_instance_f32 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ float32_t * pData);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 PID Control.
+ */
+ typedef struct
+ {
+ q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+#ifdef ARM_MATH_CM0_FAMILY
+ q15_t A1;
+ q15_t A2;
+#else
+ q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/
+#endif
+ q15_t state[3]; /**< The state array of length 3. */
+ q15_t Kp; /**< The proportional gain. */
+ q15_t Ki; /**< The integral gain. */
+ q15_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 PID Control.
+ */
+ typedef struct
+ {
+ q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ q31_t A2; /**< The derived gain, A2 = Kd . */
+ q31_t state[3]; /**< The state array of length 3. */
+ q31_t Kp; /**< The proportional gain. */
+ q31_t Ki; /**< The integral gain. */
+ q31_t Kd; /**< The derivative gain. */
+
+ } arm_pid_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point PID Control.
+ */
+ typedef struct
+ {
+ float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ float32_t A2; /**< The derived gain, A2 = Kd . */
+ float32_t state[3]; /**< The state array of length 3. */
+ float32_t Kp; /**< The proportional gain. */
+ float32_t Ki; /**< The integral gain. */
+ float32_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_f32;
+
+
+
+ /**
+ * @brief Initialization function for the floating-point PID Control.
+ * @param[in,out] *S points to an instance of the PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ * @return none.
+ */
+ void arm_pid_init_f32(
+ arm_pid_instance_f32 * S,
+ int32_t resetStateFlag);
+
+ /**
+ * @brief Reset function for the floating-point PID Control.
+ * @param[in,out] *S is an instance of the floating-point PID Control structure
+ * @return none
+ */
+ void arm_pid_reset_f32(
+ arm_pid_instance_f32 * S);
+
+
+ /**
+ * @brief Initialization function for the Q31 PID Control.
+ * @param[in,out] *S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ * @return none.
+ */
+ void arm_pid_init_q31(
+ arm_pid_instance_q31 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the Q31 PID Control.
+ * @param[in,out] *S points to an instance of the Q31 PID Control structure
+ * @return none
+ */
+
+ void arm_pid_reset_q31(
+ arm_pid_instance_q31 * S);
+
+ /**
+ * @brief Initialization function for the Q15 PID Control.
+ * @param[in,out] *S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ * @return none.
+ */
+ void arm_pid_init_q15(
+ arm_pid_instance_q15 * S,
+ int32_t resetStateFlag);
+
+ /**
+ * @brief Reset function for the Q15 PID Control.
+ * @param[in,out] *S points to an instance of the q15 PID Control structure
+ * @return none
+ */
+ void arm_pid_reset_q15(
+ arm_pid_instance_q15 * S);
+
+
+ /**
+ * @brief Instance structure for the floating-point Linear Interpolate function.
+ */
+ typedef struct
+ {
+ uint32_t nValues; /**< nValues */
+ float32_t x1; /**< x1 */
+ float32_t xSpacing; /**< xSpacing */
+ float32_t *pYData; /**< pointer to the table of Y values */
+ } arm_linear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point bilinear interpolation function.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ float32_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 bilinear interpolation function.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q31_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q15_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q7_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q7;
+
+
+ /**
+ * @brief Q7 vector multiplication.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_mult_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q15 vector multiplication.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_mult_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q31 vector multiplication.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_mult_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Floating-point vector multiplication.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_mult_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+
+
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix2_instance_q15;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_q15(
+ arm_cfft_radix2_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_q15(
+ const arm_cfft_radix2_instance_q15 * S,
+ q15_t * pSrc);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q15;
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_q15(
+ arm_cfft_radix4_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix4_q15(
+ const arm_cfft_radix4_instance_q15 * S,
+ q15_t * pSrc);
+
+ /**
+ * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix2_instance_q31;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_q31(
+ arm_cfft_radix2_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_q31(
+ const arm_cfft_radix2_instance_q31 * S,
+ q31_t * pSrc);
+
+ /**
+ * @brief Instance structure for the Q31 CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q31;
+
+/* Deprecated */
+ void arm_cfft_radix4_q31(
+ const arm_cfft_radix4_instance_q31 * S,
+ q31_t * pSrc);
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_q31(
+ arm_cfft_radix4_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix2_instance_f32;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_f32(
+ arm_cfft_radix2_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_f32(
+ const arm_cfft_radix2_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix4_instance_f32;
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_f32(
+ arm_cfft_radix4_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix4_f32(
+ const arm_cfft_radix4_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const q15_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_q15;
+
+void arm_cfft_q15(
+ const arm_cfft_instance_q15 * S,
+ q15_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const q31_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_q31;
+
+void arm_cfft_q31(
+ const arm_cfft_instance_q31 * S,
+ q31_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_f32;
+
+ void arm_cfft_f32(
+ const arm_cfft_instance_f32 * S,
+ float32_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the Q15 RFFT/RIFFT function.
+ */
+
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ const arm_cfft_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q15;
+
+ arm_status arm_rfft_init_q15(
+ arm_rfft_instance_q15 * S,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_q15(
+ const arm_rfft_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst);
+
+ /**
+ * @brief Instance structure for the Q31 RFFT/RIFFT function.
+ */
+
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ const arm_cfft_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q31;
+
+ arm_status arm_rfft_init_q31(
+ arm_rfft_instance_q31 * S,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_q31(
+ const arm_rfft_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint16_t fftLenBy2; /**< length of the complex FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_f32;
+
+ arm_status arm_rfft_init_f32(
+ arm_rfft_instance_f32 * S,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_f32(
+ const arm_rfft_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+
+typedef struct
+ {
+ arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */
+ uint16_t fftLenRFFT; /**< length of the real sequence */
+ float32_t * pTwiddleRFFT; /**< Twiddle factors real stage */
+ } arm_rfft_fast_instance_f32 ;
+
+arm_status arm_rfft_fast_init_f32 (
+ arm_rfft_fast_instance_f32 * S,
+ uint16_t fftLen);
+
+void arm_rfft_fast_f32(
+ arm_rfft_fast_instance_f32 * S,
+ float32_t * p, float32_t * pOut,
+ uint8_t ifftFlag);
+
+ /**
+ * @brief Instance structure for the floating-point DCT4/IDCT4 function.
+ */
+
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ float32_t normalize; /**< normalizing factor. */
+ float32_t *pTwiddle; /**< points to the twiddle factor table. */
+ float32_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_f32;
+
+ /**
+ * @brief Initialization function for the floating-point DCT4/IDCT4.
+ * @param[in,out] *S points to an instance of floating-point DCT4/IDCT4 structure.
+ * @param[in] *S_RFFT points to an instance of floating-point RFFT/RIFFT structure.
+ * @param[in] *S_CFFT points to an instance of floating-point CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLenReal</code> is not a supported transform length.
+ */
+
+ arm_status arm_dct4_init_f32(
+ arm_dct4_instance_f32 * S,
+ arm_rfft_instance_f32 * S_RFFT,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ float32_t normalize);
+
+ /**
+ * @brief Processing function for the floating-point DCT4/IDCT4.
+ * @param[in] *S points to an instance of the floating-point DCT4/IDCT4 structure.
+ * @param[in] *pState points to state buffer.
+ * @param[in,out] *pInlineBuffer points to the in-place input and output buffer.
+ * @return none.
+ */
+
+ void arm_dct4_f32(
+ const arm_dct4_instance_f32 * S,
+ float32_t * pState,
+ float32_t * pInlineBuffer);
+
+ /**
+ * @brief Instance structure for the Q31 DCT4/IDCT4 function.
+ */
+
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q31_t normalize; /**< normalizing factor. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ q31_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q31;
+
+ /**
+ * @brief Initialization function for the Q31 DCT4/IDCT4.
+ * @param[in,out] *S points to an instance of Q31 DCT4/IDCT4 structure.
+ * @param[in] *S_RFFT points to an instance of Q31 RFFT/RIFFT structure
+ * @param[in] *S_CFFT points to an instance of Q31 CFFT/CIFFT structure
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length.
+ */
+
+ arm_status arm_dct4_init_q31(
+ arm_dct4_instance_q31 * S,
+ arm_rfft_instance_q31 * S_RFFT,
+ arm_cfft_radix4_instance_q31 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q31_t normalize);
+
+ /**
+ * @brief Processing function for the Q31 DCT4/IDCT4.
+ * @param[in] *S points to an instance of the Q31 DCT4 structure.
+ * @param[in] *pState points to state buffer.
+ * @param[in,out] *pInlineBuffer points to the in-place input and output buffer.
+ * @return none.
+ */
+
+ void arm_dct4_q31(
+ const arm_dct4_instance_q31 * S,
+ q31_t * pState,
+ q31_t * pInlineBuffer);
+
+ /**
+ * @brief Instance structure for the Q15 DCT4/IDCT4 function.
+ */
+
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q15_t normalize; /**< normalizing factor. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ q15_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q15;
+
+ /**
+ * @brief Initialization function for the Q15 DCT4/IDCT4.
+ * @param[in,out] *S points to an instance of Q15 DCT4/IDCT4 structure.
+ * @param[in] *S_RFFT points to an instance of Q15 RFFT/RIFFT structure.
+ * @param[in] *S_CFFT points to an instance of Q15 CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length.
+ */
+
+ arm_status arm_dct4_init_q15(
+ arm_dct4_instance_q15 * S,
+ arm_rfft_instance_q15 * S_RFFT,
+ arm_cfft_radix4_instance_q15 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q15_t normalize);
+
+ /**
+ * @brief Processing function for the Q15 DCT4/IDCT4.
+ * @param[in] *S points to an instance of the Q15 DCT4 structure.
+ * @param[in] *pState points to state buffer.
+ * @param[in,out] *pInlineBuffer points to the in-place input and output buffer.
+ * @return none.
+ */
+
+ void arm_dct4_q15(
+ const arm_dct4_instance_q15 * S,
+ q15_t * pState,
+ q15_t * pInlineBuffer);
+
+ /**
+ * @brief Floating-point vector addition.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_add_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q7 vector addition.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_add_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q15 vector addition.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_add_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q31 vector addition.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_add_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Floating-point vector subtraction.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_sub_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q7 vector subtraction.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_sub_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q15 vector subtraction.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_sub_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q31 vector subtraction.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_sub_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Multiplies a floating-point vector by a scalar.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] scale scale factor to be applied
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_scale_f32(
+ float32_t * pSrc,
+ float32_t scale,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Multiplies a Q7 vector by a scalar.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_scale_q7(
+ q7_t * pSrc,
+ q7_t scaleFract,
+ int8_t shift,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Multiplies a Q15 vector by a scalar.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_scale_q15(
+ q15_t * pSrc,
+ q15_t scaleFract,
+ int8_t shift,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Multiplies a Q31 vector by a scalar.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_scale_q31(
+ q31_t * pSrc,
+ q31_t scaleFract,
+ int8_t shift,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q7 vector absolute value.
+ * @param[in] *pSrc points to the input buffer
+ * @param[out] *pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_abs_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Floating-point vector absolute value.
+ * @param[in] *pSrc points to the input buffer
+ * @param[out] *pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_abs_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q15 vector absolute value.
+ * @param[in] *pSrc points to the input buffer
+ * @param[out] *pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_abs_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q31 vector absolute value.
+ * @param[in] *pSrc points to the input buffer
+ * @param[out] *pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_abs_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Dot product of floating-point vectors.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] *result output result returned here
+ * @return none.
+ */
+
+ void arm_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t blockSize,
+ float32_t * result);
+
+ /**
+ * @brief Dot product of Q7 vectors.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] *result output result returned here
+ * @return none.
+ */
+
+ void arm_dot_prod_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ uint32_t blockSize,
+ q31_t * result);
+
+ /**
+ * @brief Dot product of Q15 vectors.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] *result output result returned here
+ * @return none.
+ */
+
+ void arm_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+ /**
+ * @brief Dot product of Q31 vectors.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] *result output result returned here
+ * @return none.
+ */
+
+ void arm_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+ /**
+ * @brief Shifts the elements of a Q7 vector a specified number of bits.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_shift_q7(
+ q7_t * pSrc,
+ int8_t shiftBits,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Shifts the elements of a Q15 vector a specified number of bits.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_shift_q15(
+ q15_t * pSrc,
+ int8_t shiftBits,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Shifts the elements of a Q31 vector a specified number of bits.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_shift_q31(
+ q31_t * pSrc,
+ int8_t shiftBits,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Adds a constant offset to a floating-point vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_offset_f32(
+ float32_t * pSrc,
+ float32_t offset,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Adds a constant offset to a Q7 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_offset_q7(
+ q7_t * pSrc,
+ q7_t offset,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Adds a constant offset to a Q15 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_offset_q15(
+ q15_t * pSrc,
+ q15_t offset,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Adds a constant offset to a Q31 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_offset_q31(
+ q31_t * pSrc,
+ q31_t offset,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Negates the elements of a floating-point vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_negate_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Negates the elements of a Q7 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_negate_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Negates the elements of a Q15 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_negate_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Negates the elements of a Q31 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_negate_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+ /**
+ * @brief Copies the elements of a floating-point vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_copy_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Copies the elements of a Q7 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_copy_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Copies the elements of a Q15 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_copy_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Copies the elements of a Q31 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_copy_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+ /**
+ * @brief Fills a constant value into a floating-point vector.
+ * @param[in] value input value to be filled
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_fill_f32(
+ float32_t value,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Fills a constant value into a Q7 vector.
+ * @param[in] value input value to be filled
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_fill_q7(
+ q7_t value,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Fills a constant value into a Q15 vector.
+ * @param[in] value input value to be filled
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_fill_q15(
+ q15_t value,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Fills a constant value into a Q31 vector.
+ * @param[in] value input value to be filled
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_fill_q31(
+ q31_t value,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+/**
+ * @brief Convolution of floating-point sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] *pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] *pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return none.
+ */
+
+
+ void arm_conv_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] *pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] *pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return none.
+ */
+
+ void arm_conv_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+
+ /**
+ * @brief Convolution of Q31 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+ /**
+ * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ * @return none.
+ */
+
+ void arm_conv_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+
+ /**
+ * @brief Partial convolution of floating-point sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+ /**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] * pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] * pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] * pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] * pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q7 sequences
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Partial convolution of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR decimator.
+ */
+
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR decimator.
+ */
+
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+
+ } arm_fir_decimate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR decimator.
+ */
+
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+
+ } arm_fir_decimate_instance_f32;
+
+
+
+ /**
+ * @brief Processing function for the floating-point FIR decimator.
+ * @param[in] *S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_f32(
+ const arm_fir_decimate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR decimator.
+ * @param[in,out] *S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * <code>blockSize</code> is not a multiple of <code>M</code>.
+ */
+
+ arm_status arm_fir_decimate_init_f32(
+ arm_fir_decimate_instance_f32 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator.
+ * @param[in] *S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_fast_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR decimator.
+ * @param[in,out] *S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * <code>blockSize</code> is not a multiple of <code>M</code>.
+ */
+
+ arm_status arm_fir_decimate_init_q15(
+ arm_fir_decimate_instance_q15 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator.
+ * @param[in] *S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_q31(
+ const arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_fast_q31(
+ arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR decimator.
+ * @param[in,out] *S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * <code>blockSize</code> is not a multiple of <code>M</code>.
+ */
+
+ arm_status arm_fir_decimate_init_q31(
+ arm_fir_decimate_instance_q31 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR interpolator.
+ */
+
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR interpolator.
+ */
+
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR interpolator.
+ */
+
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */
+ } arm_fir_interpolate_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q15 FIR interpolator.
+ * @param[in] *S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_interpolate_q15(
+ const arm_fir_interpolate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR interpolator.
+ * @param[in,out] *S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficient buffer.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
+ */
+
+ arm_status arm_fir_interpolate_init_q15(
+ arm_fir_interpolate_instance_q15 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR interpolator.
+ * @param[in] *S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_interpolate_q31(
+ const arm_fir_interpolate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 FIR interpolator.
+ * @param[in,out] *S points to an instance of the Q31 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficient buffer.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
+ */
+
+ arm_status arm_fir_interpolate_init_q31(
+ arm_fir_interpolate_instance_q31 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR interpolator.
+ * @param[in] *S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_interpolate_f32(
+ const arm_fir_interpolate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point FIR interpolator.
+ * @param[in,out] *S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficient buffer.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
+ */
+
+ arm_status arm_fir_interpolate_init_f32(
+ arm_fir_interpolate_instance_f32 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Instance structure for the high precision Q31 Biquad cascade filter.
+ */
+
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */
+
+ } arm_biquad_cas_df1_32x64_ins_q31;
+
+
+ /**
+ * @param[in] *S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cas_df1_32x64_q31(
+ const arm_biquad_cas_df1_32x64_ins_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @param[in,out] *S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format
+ * @return none
+ */
+
+ void arm_biquad_cas_df1_32x64_init_q31(
+ arm_biquad_cas_df1_32x64_ins_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q63_t * pState,
+ uint8_t postShift);
+
+
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f32;
+
+
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_stereo_df2T_instance_f32;
+
+
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float64_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float64_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f64;
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] *S points to an instance of the filter data structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df2T_f32(
+ const arm_biquad_cascade_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. 2 channels
+ * @param[in] *S points to an instance of the filter data structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_stereo_df2T_f32(
+ const arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] *S points to an instance of the filter data structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df2T_f64(
+ const arm_biquad_cascade_df2T_instance_f64 * S,
+ float64_t * pSrc,
+ float64_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @return none
+ */
+
+ void arm_biquad_cascade_df2T_init_f32(
+ arm_biquad_cascade_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @return none
+ */
+
+ void arm_biquad_cascade_stereo_df2T_init_f32(
+ arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @return none
+ */
+
+ void arm_biquad_cascade_df2T_init_f64(
+ arm_biquad_cascade_df2T_instance_f64 * S,
+ uint8_t numStages,
+ float64_t * pCoeffs,
+ float64_t * pState);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR lattice filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR lattice filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR lattice filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_f32;
+
+ /**
+ * @brief Initialization function for the Q15 FIR lattice filter.
+ * @param[in] *S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] *pState points to the state buffer. The array is of length numStages.
+ * @return none.
+ */
+
+ void arm_fir_lattice_init_q15(
+ arm_fir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR lattice filter.
+ * @param[in] *S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_lattice_q15(
+ const arm_fir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 FIR lattice filter.
+ * @param[in] *S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] *pState points to the state buffer. The array is of length numStages.
+ * @return none.
+ */
+
+ void arm_fir_lattice_init_q31(
+ arm_fir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR lattice filter.
+ * @param[in] *S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_fir_lattice_q31(
+ const arm_fir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+/**
+ * @brief Initialization function for the floating-point FIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] *pState points to the state buffer. The array is of length numStages.
+ * @return none.
+ */
+
+ void arm_fir_lattice_init_f32(
+ arm_fir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+ /**
+ * @brief Processing function for the floating-point FIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_fir_lattice_f32(
+ const arm_fir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Instance structure for the Q15 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_f32;
+
+ /**
+ * @brief Processing function for the floating-point IIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_f32(
+ const arm_iir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point IIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] *pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] *pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] *pState points to the state buffer. The array is of length numStages+blockSize-1.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_init_f32(
+ arm_iir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pkCoeffs,
+ float32_t * pvCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 IIR lattice filter.
+ * @param[in] *S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_q31(
+ const arm_iir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 IIR lattice filter.
+ * @param[in] *S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] *pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] *pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] *pState points to the state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_init_q31(
+ arm_iir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pkCoeffs,
+ q31_t * pvCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 IIR lattice filter.
+ * @param[in] *S points to an instance of the Q15 IIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_q15(
+ const arm_iir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Initialization function for the Q15 IIR lattice filter.
+ * @param[in] *S points to an instance of the fixed-point Q15 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] *pkCoeffs points to reflection coefficient buffer. The array is of length numStages.
+ * @param[in] *pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] *pState points to state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process per call.
+ * @return none.
+ */
+
+ void arm_iir_lattice_init_q15(
+ arm_iir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pkCoeffs,
+ q15_t * pvCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Instance structure for the floating-point LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that controls filter coefficient updates. */
+ } arm_lms_instance_f32;
+
+ /**
+ * @brief Processing function for floating-point LMS filter.
+ * @param[in] *S points to an instance of the floating-point LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_f32(
+ const arm_lms_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for floating-point LMS filter.
+ * @param[in] *S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to the coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_init_f32(
+ arm_lms_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+ /**
+ * @brief Instance structure for the Q15 LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+ } arm_lms_instance_q15;
+
+
+ /**
+ * @brief Initialization function for the Q15 LMS filter.
+ * @param[in] *S points to an instance of the Q15 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to the coefficient buffer.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ * @return none.
+ */
+
+ void arm_lms_init_q15(
+ arm_lms_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+ /**
+ * @brief Processing function for Q15 LMS filter.
+ * @param[in] *S points to an instance of the Q15 LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_q15(
+ const arm_lms_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+
+ } arm_lms_instance_q31;
+
+ /**
+ * @brief Processing function for Q31 LMS filter.
+ * @param[in] *S points to an instance of the Q15 LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_q31(
+ const arm_lms_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for Q31 LMS filter.
+ * @param[in] *S points to an instance of the Q31 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ * @return none.
+ */
+
+ void arm_lms_init_q31(
+ arm_lms_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+ /**
+ * @brief Instance structure for the floating-point normalized LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that control filter coefficient updates. */
+ float32_t energy; /**< saves previous frame energy. */
+ float32_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_f32;
+
+ /**
+ * @brief Processing function for floating-point normalized LMS filter.
+ * @param[in] *S points to an instance of the floating-point normalized LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_norm_f32(
+ arm_lms_norm_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for floating-point normalized LMS filter.
+ * @param[in] *S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_norm_init_f32(
+ arm_lms_norm_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q31_t *recipTable; /**< points to the reciprocal initial value table. */
+ q31_t energy; /**< saves previous frame energy. */
+ q31_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q31;
+
+ /**
+ * @brief Processing function for Q31 normalized LMS filter.
+ * @param[in] *S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_norm_q31(
+ arm_lms_norm_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for Q31 normalized LMS filter.
+ * @param[in] *S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ * @return none.
+ */
+
+ void arm_lms_norm_init_q31(
+ arm_lms_norm_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+ /**
+ * @brief Instance structure for the Q15 normalized LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< Number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q15_t *recipTable; /**< Points to the reciprocal initial value table. */
+ q15_t energy; /**< saves previous frame energy. */
+ q15_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q15;
+
+ /**
+ * @brief Processing function for Q15 normalized LMS filter.
+ * @param[in] *S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_norm_q15(
+ arm_lms_norm_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q15 normalized LMS filter.
+ * @param[in] *S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ * @return none.
+ */
+
+ void arm_lms_norm_init_q15(
+ arm_lms_norm_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+ /**
+ * @brief Correlation of floating-point sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] *pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @return none.
+ */
+ void arm_correlate_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Correlation of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] *pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @return none.
+ */
+
+ void arm_correlate_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch);
+
+ /**
+ * @brief Correlation of Q31 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+ /**
+ * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ * @return none.
+ */
+
+ void arm_correlate_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+
+ /**
+ * @brief Instance structure for the floating-point sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 sparse FIR filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 sparse FIR filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q7 sparse FIR filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q7;
+
+ /**
+ * @brief Processing function for the floating-point sparse FIR filter.
+ * @param[in] *S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_sparse_f32(
+ arm_fir_sparse_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ float32_t * pScratchIn,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point sparse FIR filter.
+ * @param[in,out] *S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] *pCoeffs points to the array of filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] *pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ * @return none
+ */
+
+ void arm_fir_sparse_init_f32(
+ arm_fir_sparse_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 sparse FIR filter.
+ * @param[in] *S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_sparse_q31(
+ arm_fir_sparse_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ q31_t * pScratchIn,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 sparse FIR filter.
+ * @param[in,out] *S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] *pCoeffs points to the array of filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] *pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ * @return none
+ */
+
+ void arm_fir_sparse_init_q31(
+ arm_fir_sparse_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q15 sparse FIR filter.
+ * @param[in] *S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] *pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_sparse_q15(
+ arm_fir_sparse_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ q15_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 sparse FIR filter.
+ * @param[in,out] *S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] *pCoeffs points to the array of filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] *pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ * @return none
+ */
+
+ void arm_fir_sparse_init_q15(
+ arm_fir_sparse_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q7 sparse FIR filter.
+ * @param[in] *S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] *pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_sparse_q7(
+ arm_fir_sparse_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ q7_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q7 sparse FIR filter.
+ * @param[in,out] *S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] *pCoeffs points to the array of filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] *pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ * @return none
+ */
+
+ void arm_fir_sparse_init_q7(
+ arm_fir_sparse_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /*
+ * @brief Floating-point sin_cos function.
+ * @param[in] theta input value in degrees
+ * @param[out] *pSinVal points to the processed sine output.
+ * @param[out] *pCosVal points to the processed cos output.
+ * @return none.
+ */
+
+ void arm_sin_cos_f32(
+ float32_t theta,
+ float32_t * pSinVal,
+ float32_t * pCcosVal);
+
+ /*
+ * @brief Q31 sin_cos function.
+ * @param[in] theta scaled input value in degrees
+ * @param[out] *pSinVal points to the processed sine output.
+ * @param[out] *pCosVal points to the processed cosine output.
+ * @return none.
+ */
+
+ void arm_sin_cos_q31(
+ q31_t theta,
+ q31_t * pSinVal,
+ q31_t * pCosVal);
+
+
+ /**
+ * @brief Floating-point complex conjugate.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_conj_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex conjugate.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_conj_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q15 complex conjugate.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_conj_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+
+ /**
+ * @brief Floating-point complex magnitude squared
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_squared_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex magnitude squared
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_squared_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q15 complex magnitude squared
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_squared_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup PID PID Motor Control
+ *
+ * A Proportional Integral Derivative (PID) controller is a generic feedback control
+ * loop mechanism widely used in industrial control systems.
+ * A PID controller is the most commonly used type of feedback controller.
+ *
+ * This set of functions implements (PID) controllers
+ * for Q15, Q31, and floating-point data types. The functions operate on a single sample
+ * of data and each call to the function returns a single processed value.
+ * <code>S</code> points to an instance of the PID control data structure. <code>in</code>
+ * is the input sample value. The functions return the output value.
+ *
+ * \par Algorithm:
+ * <pre>
+ * y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
+ * A0 = Kp + Ki + Kd
+ * A1 = (-Kp ) - (2 * Kd )
+ * A2 = Kd </pre>
+ *
+ * \par
+ * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant
+ *
+ * \par
+ * \image html PID.gif "Proportional Integral Derivative Controller"
+ *
+ * \par
+ * The PID controller calculates an "error" value as the difference between
+ * the measured output and the reference input.
+ * The controller attempts to minimize the error by adjusting the process control inputs.
+ * The proportional value determines the reaction to the current error,
+ * the integral value determines the reaction based on the sum of recent errors,
+ * and the derivative value determines the reaction based on the rate at which the error has been changing.
+ *
+ * \par Instance Structure
+ * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure.
+ * A separate instance structure must be defined for each PID Controller.
+ * There are separate instance structure declarations for each of the 3 supported data types.
+ *
+ * \par Reset Functions
+ * There is also an associated reset function for each data type which clears the state array.
+ *
+ * \par Initialization Functions
+ * There is also an associated initialization function for each data type.
+ * The initialization function performs the following operations:
+ * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains.
+ * - Zeros out the values in the state buffer.
+ *
+ * \par
+ * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function.
+ *
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the fixed-point versions of the PID Controller functions.
+ * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup PID
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point PID Control.
+ * @param[in,out] *S is an instance of the floating-point PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ */
+
+
+ static __INLINE float32_t arm_pid_f32(
+ arm_pid_instance_f32 * S,
+ float32_t in)
+ {
+ float32_t out;
+
+ /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */
+ out = (S->A0 * in) +
+ (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]);
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @brief Process function for the Q31 PID Control.
+ * @param[in,out] *S points to an instance of the Q31 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 64-bit accumulator.
+ * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit.
+ * Thus, if the accumulator result overflows it wraps around rather than clip.
+ * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions.
+ * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format.
+ */
+
+ static __INLINE q31_t arm_pid_q31(
+ arm_pid_instance_q31 * S,
+ q31_t in)
+ {
+ q63_t acc;
+ q31_t out;
+
+ /* acc = A0 * x[n] */
+ acc = (q63_t) S->A0 * in;
+
+ /* acc += A1 * x[n-1] */
+ acc += (q63_t) S->A1 * S->state[0];
+
+ /* acc += A2 * x[n-2] */
+ acc += (q63_t) S->A2 * S->state[1];
+
+ /* convert output to 1.31 format to add y[n-1] */
+ out = (q31_t) (acc >> 31u);
+
+ /* out += y[n-1] */
+ out += S->state[2];
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @brief Process function for the Q15 PID Control.
+ * @param[in,out] *S points to an instance of the Q15 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using a 64-bit internal accumulator.
+ * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result.
+ * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format.
+ * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved.
+ * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits.
+ * Lastly, the accumulator is saturated to yield a result in 1.15 format.
+ */
+
+ static __INLINE q15_t arm_pid_q15(
+ arm_pid_instance_q15 * S,
+ q15_t in)
+ {
+ q63_t acc;
+ q15_t out;
+
+#ifndef ARM_MATH_CM0_FAMILY
+ __SIMD32_TYPE *vstate;
+
+ /* Implementation of PID controller */
+
+ /* acc = A0 * x[n] */
+ acc = (q31_t) __SMUAD(S->A0, in);
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ vstate = __SIMD32_CONST(S->state);
+ acc = __SMLALD(S->A1, (q31_t) *vstate, acc);
+
+#else
+ /* acc = A0 * x[n] */
+ acc = ((q31_t) S->A0) * in;
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ acc += (q31_t) S->A1 * S->state[0];
+ acc += (q31_t) S->A2 * S->state[1];
+
+#endif
+
+ /* acc += y[n-1] */
+ acc += (q31_t) S->state[2] << 15;
+
+ /* saturate the output */
+ out = (q15_t) (__SSAT((acc >> 15), 16));
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @} end of PID group
+ */
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] *src points to the instance of the input floating-point matrix structure.
+ * @param[out] *dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+
+ arm_status arm_mat_inverse_f32(
+ const arm_matrix_instance_f32 * src,
+ arm_matrix_instance_f32 * dst);
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] *src points to the instance of the input floating-point matrix structure.
+ * @param[out] *dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+
+ arm_status arm_mat_inverse_f64(
+ const arm_matrix_instance_f64 * src,
+ arm_matrix_instance_f64 * dst);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+
+ /**
+ * @defgroup clarke Vector Clarke Transform
+ * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector.
+ * Generally the Clarke transform uses three-phase currents <code>Ia, Ib and Ic</code> to calculate currents
+ * in the two-phase orthogonal stator axis <code>Ialpha</code> and <code>Ibeta</code>.
+ * When <code>Ialpha</code> is superposed with <code>Ia</code> as shown in the figure below
+ * \image html clarke.gif Stator current space vector and its components in (a,b).
+ * and <code>Ia + Ib + Ic = 0</code>, in this condition <code>Ialpha</code> and <code>Ibeta</code>
+ * can be calculated using only <code>Ia</code> and <code>Ib</code>.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeFormula.gif
+ * where <code>Ia</code> and <code>Ib</code> are the instantaneous stator phases and
+ * <code>pIalpha</code> and <code>pIbeta</code> are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup clarke
+ * @{
+ */
+
+ /**
+ *
+ * @brief Floating-point Clarke transform
+ * @param[in] Ia input three-phase coordinate <code>a</code>
+ * @param[in] Ib input three-phase coordinate <code>b</code>
+ * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
+ * @return none.
+ */
+
+ static __INLINE void arm_clarke_f32(
+ float32_t Ia,
+ float32_t Ib,
+ float32_t * pIalpha,
+ float32_t * pIbeta)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */
+ *pIbeta =
+ ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib);
+
+ }
+
+ /**
+ * @brief Clarke transform for Q31 version
+ * @param[in] Ia input three-phase coordinate <code>a</code>
+ * @param[in] Ib input three-phase coordinate <code>b</code>
+ * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+
+ static __INLINE void arm_clarke_q31(
+ q31_t Ia,
+ q31_t Ib,
+ q31_t * pIalpha,
+ q31_t * pIbeta)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIalpha from Ia by equation pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30);
+
+ /* Intermediate product is calculated by (2/sqrt(3) * Ib) */
+ product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30);
+
+ /* pIbeta is calculated by adding the intermediate products */
+ *pIbeta = __QADD(product1, product2);
+ }
+
+ /**
+ * @} end of clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q31 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_q7_to_q31(
+ q7_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_clarke Vector Inverse Clarke Transform
+ * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeInvFormula.gif
+ * where <code>pIa</code> and <code>pIb</code> are the instantaneous stator phases and
+ * <code>Ialpha</code> and <code>Ibeta</code> are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_clarke
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Clarke transform
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] *pIa points to output three-phase coordinate <code>a</code>
+ * @param[out] *pIb points to output three-phase coordinate <code>b</code>
+ * @return none.
+ */
+
+
+ static __INLINE void arm_inv_clarke_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pIa,
+ float32_t * pIb)
+ {
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */
+ *pIb = -0.5 * Ialpha + (float32_t) 0.8660254039 *Ibeta;
+
+ }
+
+ /**
+ * @brief Inverse Clarke transform for Q31 version
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] *pIa points to output three-phase coordinate <code>a</code>
+ * @param[out] *pIb points to output three-phase coordinate <code>b</code>
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the subtraction, hence there is no risk of overflow.
+ */
+
+ static __INLINE void arm_inv_clarke_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pIa,
+ q31_t * pIb)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31);
+
+ /* Intermediate product is calculated by (1/sqrt(3) * pIb) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31);
+
+ /* pIb is calculated by subtracting the products */
+ *pIb = __QSUB(product2, product1);
+
+ }
+
+ /**
+ * @} end of inv_clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q15 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_q7_to_q15(
+ q7_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup park Vector Park Transform
+ *
+ * Forward Park transform converts the input two-coordinate vector to flux and torque components.
+ * The Park transform can be used to realize the transformation of the <code>Ialpha</code> and the <code>Ibeta</code> currents
+ * from the stationary to the moving reference frame and control the spatial relationship between
+ * the stator vector current and rotor flux vector.
+ * If we consider the d axis aligned with the rotor flux, the diagram below shows the
+ * current vector and the relationship from the two reference frames:
+ * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame"
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkFormula.gif
+ * where <code>Ialpha</code> and <code>Ibeta</code> are the stator vector components,
+ * <code>pId</code> and <code>pIq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Park transform
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] *pId points to output rotor reference frame d
+ * @param[out] *pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ * @return none.
+ *
+ * The function implements the forward Park transform.
+ *
+ */
+
+ static __INLINE void arm_park_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pId,
+ float32_t * pIq,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */
+ *pId = Ialpha * cosVal + Ibeta * sinVal;
+
+ /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */
+ *pIq = -Ialpha * sinVal + Ibeta * cosVal;
+
+ }
+
+ /**
+ * @brief Park transform for Q31 version
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] *pId points to output rotor reference frame d
+ * @param[out] *pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition and subtraction, hence there is no risk of overflow.
+ */
+
+
+ static __INLINE void arm_park_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pId,
+ q31_t * pIq,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Ialpha * cosVal) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * sinVal) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Ialpha * sinVal) */
+ product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * cosVal) */
+ product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31);
+
+ /* Calculate pId by adding the two intermediate products 1 and 2 */
+ *pId = __QADD(product1, product2);
+
+ /* Calculate pIq by subtracting the two intermediate products 3 from 4 */
+ *pIq = __QSUB(product4, product3);
+ }
+
+ /**
+ * @} end of park group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q7_to_float(
+ q7_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_park Vector Inverse Park transform
+ * Inverse Park transform converts the input flux and torque components to two-coordinate vector.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkInvFormula.gif
+ * where <code>pIalpha</code> and <code>pIbeta</code> are the stator vector components,
+ * <code>Id</code> and <code>Iq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Park transform
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ * @return none.
+ */
+
+ static __INLINE void arm_inv_park_f32(
+ float32_t Id,
+ float32_t Iq,
+ float32_t * pIalpha,
+ float32_t * pIbeta,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */
+ *pIalpha = Id * cosVal - Iq * sinVal;
+
+ /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */
+ *pIbeta = Id * sinVal + Iq * cosVal;
+
+ }
+
+
+ /**
+ * @brief Inverse Park transform for Q31 version
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+
+
+ static __INLINE void arm_inv_park_q31(
+ q31_t Id,
+ q31_t Iq,
+ q31_t * pIalpha,
+ q31_t * pIbeta,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Id * cosVal) */
+ product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * sinVal) */
+ product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Id * sinVal) */
+ product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * cosVal) */
+ product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31);
+
+ /* Calculate pIalpha by using the two intermediate products 1 and 2 */
+ *pIalpha = __QSUB(product1, product2);
+
+ /* Calculate pIbeta by using the two intermediate products 3 and 4 */
+ *pIbeta = __QADD(product4, product3);
+
+ }
+
+ /**
+ * @} end of Inverse park group
+ */
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q31_to_float(
+ q31_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup LinearInterpolate Linear Interpolation
+ *
+ * Linear interpolation is a method of curve fitting using linear polynomials.
+ * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line
+ *
+ * \par
+ * \image html LinearInterp.gif "Linear interpolation"
+ *
+ * \par
+ * A Linear Interpolate function calculates an output value(y), for the input(x)
+ * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values)
+ *
+ * \par Algorithm:
+ * <pre>
+ * y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
+ * where x0, x1 are nearest values of input x
+ * y0, y1 are nearest values to output y
+ * </pre>
+ *
+ * \par
+ * This set of functions implements Linear interpolation process
+ * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single
+ * sample of data and each call to the function returns a single processed value.
+ * <code>S</code> points to an instance of the Linear Interpolate function data structure.
+ * <code>x</code> is the input sample value. The functions returns the output value.
+ *
+ * \par
+ * if x is outside of the table boundary, Linear interpolation returns first value of the table
+ * if x is below input range and returns last value of table if x is above range.
+ */
+
+ /**
+ * @addtogroup LinearInterpolate
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point Linear Interpolation Function.
+ * @param[in,out] *S is an instance of the floating-point Linear Interpolation structure
+ * @param[in] x input sample to process
+ * @return y processed output sample.
+ *
+ */
+
+ static __INLINE float32_t arm_linear_interp_f32(
+ arm_linear_interp_instance_f32 * S,
+ float32_t x)
+ {
+
+ float32_t y;
+ float32_t x0, x1; /* Nearest input values */
+ float32_t y0, y1; /* Nearest output values */
+ float32_t xSpacing = S->xSpacing; /* spacing between input values */
+ int32_t i; /* Index variable */
+ float32_t *pYData = S->pYData; /* pointer to output table */
+
+ /* Calculation of index */
+ i = (int32_t) ((x - S->x1) / xSpacing);
+
+ if(i < 0)
+ {
+ /* Iniatilize output for below specified range as least output value of table */
+ y = pYData[0];
+ }
+ else if((uint32_t)i >= S->nValues)
+ {
+ /* Iniatilize output for above specified range as last output value of table */
+ y = pYData[S->nValues - 1];
+ }
+ else
+ {
+ /* Calculation of nearest input values */
+ x0 = S->x1 + i * xSpacing;
+ x1 = S->x1 + (i + 1) * xSpacing;
+
+ /* Read of nearest output values */
+ y0 = pYData[i];
+ y1 = pYData[i + 1];
+
+ /* Calculation of output */
+ y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0));
+
+ }
+
+ /* returns output value */
+ return (y);
+ }
+
+ /**
+ *
+ * @brief Process function for the Q31 Linear Interpolation Function.
+ * @param[in] *pYData pointer to Q31 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+
+
+ static __INLINE q31_t arm_linear_interp_q31(
+ q31_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q31_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & 0xFFF00000) >> 20);
+
+ if(index >= (int32_t)(nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return (pYData[0]);
+ }
+ else
+ {
+
+ /* 20 bits for the fractional part */
+ /* shift left by 11 to keep fract in 1.31 format */
+ fract = (x & 0x000FFFFF) << 11;
+
+ /* Read two nearest output values from the index in 1.31(q31) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1u];
+
+ /* Calculation of y0 * (1-fract) and y is in 2.30 format */
+ y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32));
+
+ /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */
+ y += ((q31_t) (((q63_t) y1 * fract) >> 32));
+
+ /* Convert y to 1.31 format */
+ return (y << 1u);
+
+ }
+
+ }
+
+ /**
+ *
+ * @brief Process function for the Q15 Linear Interpolation Function.
+ * @param[in] *pYData pointer to Q15 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+
+
+ static __INLINE q15_t arm_linear_interp_q15(
+ q15_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q63_t y; /* output */
+ q15_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & 0xFFF00000) >> 20u);
+
+ if(index >= (int32_t)(nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return (pYData[0]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y0 = pYData[index];
+ y1 = pYData[index + 1u];
+
+ /* Calculation of y0 * (1-fract) and y is in 13.35 format */
+ y = ((q63_t) y0 * (0xFFFFF - fract));
+
+ /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */
+ y += ((q63_t) y1 * (fract));
+
+ /* convert y to 1.15 format */
+ return (y >> 20);
+ }
+
+
+ }
+
+ /**
+ *
+ * @brief Process function for the Q7 Linear Interpolation Function.
+ * @param[in] *pYData pointer to Q7 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ */
+
+
+ static __INLINE q7_t arm_linear_interp_q7(
+ q7_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q7_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ uint32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ if (x < 0)
+ {
+ return (pYData[0]);
+ }
+ index = (x >> 20) & 0xfff;
+
+
+ if(index >= (nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else
+ {
+
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index and are in 1.7(q7) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1u];
+
+ /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */
+ y = ((y0 * (0xFFFFF - fract)));
+
+ /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */
+ y += (y1 * fract);
+
+ /* convert y to 1.7(q7) format */
+ return (y >> 20u);
+
+ }
+
+ }
+ /**
+ * @} end of LinearInterpolate group
+ */
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return sin(x).
+ */
+
+ float32_t arm_sin_f32(
+ float32_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+
+ q31_t arm_sin_q31(
+ q31_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+
+ q15_t arm_sin_q15(
+ q15_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return cos(x).
+ */
+
+ float32_t arm_cos_f32(
+ float32_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+
+ q31_t arm_cos_q31(
+ q31_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+
+ q15_t arm_cos_q15(
+ q15_t x);
+
+
+ /**
+ * @ingroup groupFastMath
+ */
+
+
+ /**
+ * @defgroup SQRT Square Root
+ *
+ * Computes the square root of a number.
+ * There are separate functions for Q15, Q31, and floating-point data types.
+ * The square root function is computed using the Newton-Raphson algorithm.
+ * This is an iterative algorithm of the form:
+ * <pre>
+ * x1 = x0 - f(x0)/f'(x0)
+ * </pre>
+ * where <code>x1</code> is the current estimate,
+ * <code>x0</code> is the previous estimate, and
+ * <code>f'(x0)</code> is the derivative of <code>f()</code> evaluated at <code>x0</code>.
+ * For the square root function, the algorithm reduces to:
+ * <pre>
+ * x0 = in/2 [initial guess]
+ * x1 = 1/2 * ( x0 + in / x0) [each iteration]
+ * </pre>
+ */
+
+
+ /**
+ * @addtogroup SQRT
+ * @{
+ */
+
+ /**
+ * @brief Floating-point square root function.
+ * @param[in] in input value.
+ * @param[out] *pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * <code>in</code> is negative value and returns zero output for negative values.
+ */
+
+ static __INLINE arm_status arm_sqrt_f32(
+ float32_t in,
+ float32_t * pOut)
+ {
+ if(in >= 0.0f)
+ {
+
+// #if __FPU_USED
+#if (__FPU_USED == 1) && defined ( __CC_ARM )
+ *pOut = __sqrtf(in);
+#else
+ *pOut = sqrtf(in);
+#endif
+
+ return (ARM_MATH_SUCCESS);
+ }
+ else
+ {
+ *pOut = 0.0f;
+ return (ARM_MATH_ARGUMENT_ERROR);
+ }
+
+ }
+
+
+ /**
+ * @brief Q31 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF.
+ * @param[out] *pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * <code>in</code> is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q31(
+ q31_t in,
+ q31_t * pOut);
+
+ /**
+ * @brief Q15 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF.
+ * @param[out] *pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * <code>in</code> is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q15(
+ q15_t in,
+ q15_t * pOut);
+
+ /**
+ * @} end of SQRT group
+ */
+
+
+
+
+
+
+ /**
+ * @brief floating-point Circular write function.
+ */
+
+ static __INLINE void arm_circularWrite_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const int32_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = wOffset;
+ }
+
+
+
+ /**
+ * @brief floating-point Circular Read function.
+ */
+ static __INLINE void arm_circularRead_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ int32_t * dst,
+ int32_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (int32_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+ /**
+ * @brief Q15 Circular write function.
+ */
+
+ static __INLINE void arm_circularWrite_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q15_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = wOffset;
+ }
+
+
+
+ /**
+ * @brief Q15 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q15_t * dst,
+ q15_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q15_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Q7 Circular write function.
+ */
+
+ static __INLINE void arm_circularWrite_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q7_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = wOffset;
+ }
+
+
+
+ /**
+ * @brief Q7 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q7_t * dst,
+ q7_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q7_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_power_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+ /**
+ * @brief Sum of the squares of the elements of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_power_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Sum of the squares of the elements of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_power_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+ /**
+ * @brief Sum of the squares of the elements of a Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_power_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Mean value of a Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_mean_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult);
+
+ /**
+ * @brief Mean value of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+ void arm_mean_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+ /**
+ * @brief Mean value of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+ void arm_mean_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Mean value of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+ void arm_mean_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Variance of the elements of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_var_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Variance of the elements of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_var_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Variance of the elements of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_var_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+ /**
+ * @brief Root Mean Square of the elements of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_rms_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Root Mean Square of the elements of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_rms_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Root Mean Square of the elements of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_rms_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+ /**
+ * @brief Standard deviation of the elements of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_std_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Standard deviation of the elements of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_std_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Standard deviation of the elements of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_std_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+ /**
+ * @brief Floating-point complex magnitude
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex magnitude
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q15 complex magnitude
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q15 complex dot product
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] *realResult real part of the result returned here
+ * @param[out] *imagResult imaginary part of the result returned here
+ * @return none.
+ */
+
+ void arm_cmplx_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t numSamples,
+ q31_t * realResult,
+ q31_t * imagResult);
+
+ /**
+ * @brief Q31 complex dot product
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] *realResult real part of the result returned here
+ * @param[out] *imagResult imaginary part of the result returned here
+ * @return none.
+ */
+
+ void arm_cmplx_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t numSamples,
+ q63_t * realResult,
+ q63_t * imagResult);
+
+ /**
+ * @brief Floating-point complex dot product
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] *realResult real part of the result returned here
+ * @param[out] *imagResult imaginary part of the result returned here
+ * @return none.
+ */
+
+ void arm_cmplx_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t numSamples,
+ float32_t * realResult,
+ float32_t * imagResult);
+
+ /**
+ * @brief Q15 complex-by-real multiplication
+ * @param[in] *pSrcCmplx points to the complex input vector
+ * @param[in] *pSrcReal points to the real input vector
+ * @param[out] *pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_real_q15(
+ q15_t * pSrcCmplx,
+ q15_t * pSrcReal,
+ q15_t * pCmplxDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex-by-real multiplication
+ * @param[in] *pSrcCmplx points to the complex input vector
+ * @param[in] *pSrcReal points to the real input vector
+ * @param[out] *pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_real_q31(
+ q31_t * pSrcCmplx,
+ q31_t * pSrcReal,
+ q31_t * pCmplxDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Floating-point complex-by-real multiplication
+ * @param[in] *pSrcCmplx points to the complex input vector
+ * @param[in] *pSrcReal points to the real input vector
+ * @param[out] *pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_real_f32(
+ float32_t * pSrcCmplx,
+ float32_t * pSrcReal,
+ float32_t * pCmplxDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Minimum value of a Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *result is output pointer
+ * @param[in] index is the array index of the minimum value in the input buffer.
+ * @return none.
+ */
+
+ void arm_min_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * result,
+ uint32_t * index);
+
+ /**
+ * @brief Minimum value of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output pointer
+ * @param[in] *pIndex is the array index of the minimum value in the input buffer.
+ * @return none.
+ */
+
+ void arm_min_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+ /**
+ * @brief Minimum value of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output pointer
+ * @param[out] *pIndex is the array index of the minimum value in the input buffer.
+ * @return none.
+ */
+ void arm_min_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+ /**
+ * @brief Minimum value of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output pointer
+ * @param[out] *pIndex is the array index of the minimum value in the input buffer.
+ * @return none.
+ */
+
+ void arm_min_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a Q7 vector.
+ * @param[in] *pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] *pResult maximum value returned here
+ * @param[out] *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+ void arm_max_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult,
+ uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a Q15 vector.
+ * @param[in] *pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] *pResult maximum value returned here
+ * @param[out] *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+ void arm_max_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a Q31 vector.
+ * @param[in] *pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] *pResult maximum value returned here
+ * @param[out] *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+ void arm_max_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a floating-point vector.
+ * @param[in] *pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] *pResult maximum value returned here
+ * @param[out] *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+ void arm_max_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+ /**
+ * @brief Q15 complex-by-complex multiplication
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_cmplx_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex-by-complex multiplication
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_cmplx_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Floating-point complex-by-complex multiplication
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_cmplx_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q31 vector.
+ * @param[in] *pSrc points to the floating-point input vector
+ * @param[out] *pDst points to the Q31 output vector
+ * @param[in] blockSize length of the input vector
+ * @return none.
+ */
+ void arm_float_to_q31(
+ float32_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q15 vector.
+ * @param[in] *pSrc points to the floating-point input vector
+ * @param[out] *pDst points to the Q15 output vector
+ * @param[in] blockSize length of the input vector
+ * @return none
+ */
+ void arm_float_to_q15(
+ float32_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q7 vector.
+ * @param[in] *pSrc points to the floating-point input vector
+ * @param[out] *pDst points to the Q7 output vector
+ * @param[in] blockSize length of the input vector
+ * @return none
+ */
+ void arm_float_to_q7(
+ float32_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q31_to_q15(
+ q31_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q31_to_q7(
+ q31_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Converts the elements of the Q15 vector to floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q15_to_float(
+ q15_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q15_to_q31(
+ q15_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q15_to_q7(
+ q15_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup BilinearInterpolate Bilinear Interpolation
+ *
+ * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid.
+ * The underlying function <code>f(x, y)</code> is sampled on a regular grid and the interpolation process
+ * determines values between the grid points.
+ * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension.
+ * Bilinear interpolation is often used in image processing to rescale images.
+ * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types.
+ *
+ * <b>Algorithm</b>
+ * \par
+ * The instance structure used by the bilinear interpolation functions describes a two dimensional data table.
+ * For floating-point, the instance structure is defined as:
+ * <pre>
+ * typedef struct
+ * {
+ * uint16_t numRows;
+ * uint16_t numCols;
+ * float32_t *pData;
+ * } arm_bilinear_interp_instance_f32;
+ * </pre>
+ *
+ * \par
+ * where <code>numRows</code> specifies the number of rows in the table;
+ * <code>numCols</code> specifies the number of columns in the table;
+ * and <code>pData</code> points to an array of size <code>numRows*numCols</code> values.
+ * The data table <code>pTable</code> is organized in row order and the supplied data values fall on integer indexes.
+ * That is, table element (x,y) is located at <code>pTable[x + y*numCols]</code> where x and y are integers.
+ *
+ * \par
+ * Let <code>(x, y)</code> specify the desired interpolation point. Then define:
+ * <pre>
+ * XF = floor(x)
+ * YF = floor(y)
+ * </pre>
+ * \par
+ * The interpolated output point is computed as:
+ * <pre>
+ * f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
+ * + f(XF+1, YF) * (x-XF)*(1-(y-YF))
+ * + f(XF, YF+1) * (1-(x-XF))*(y-YF)
+ * + f(XF+1, YF+1) * (x-XF)*(y-YF)
+ * </pre>
+ * Note that the coordinates (x, y) contain integer and fractional components.
+ * The integer components specify which portion of the table to use while the
+ * fractional components control the interpolation processor.
+ *
+ * \par
+ * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output.
+ */
+
+ /**
+ * @addtogroup BilinearInterpolate
+ * @{
+ */
+
+ /**
+ *
+ * @brief Floating-point bilinear interpolation.
+ * @param[in,out] *S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate.
+ * @param[in] Y interpolation coordinate.
+ * @return out interpolated value.
+ */
+
+
+ static __INLINE float32_t arm_bilinear_interp_f32(
+ const arm_bilinear_interp_instance_f32 * S,
+ float32_t X,
+ float32_t Y)
+ {
+ float32_t out;
+ float32_t f00, f01, f10, f11;
+ float32_t *pData = S->pData;
+ int32_t xIndex, yIndex, index;
+ float32_t xdiff, ydiff;
+ float32_t b1, b2, b3, b4;
+
+ xIndex = (int32_t) X;
+ yIndex = (int32_t) Y;
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0
+ || yIndex > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* Calculation of index for two nearest points in X-direction */
+ index = (xIndex - 1) + (yIndex - 1) * S->numCols;
+
+
+ /* Read two nearest points in X-direction */
+ f00 = pData[index];
+ f01 = pData[index + 1];
+
+ /* Calculation of index for two nearest points in Y-direction */
+ index = (xIndex - 1) + (yIndex) * S->numCols;
+
+
+ /* Read two nearest points in Y-direction */
+ f10 = pData[index];
+ f11 = pData[index + 1];
+
+ /* Calculation of intermediate values */
+ b1 = f00;
+ b2 = f01 - f00;
+ b3 = f10 - f00;
+ b4 = f00 - f01 - f10 + f11;
+
+ /* Calculation of fractional part in X */
+ xdiff = X - xIndex;
+
+ /* Calculation of fractional part in Y */
+ ydiff = Y - yIndex;
+
+ /* Calculation of bi-linear interpolated output */
+ out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ *
+ * @brief Q31 bilinear interpolation.
+ * @param[in,out] *S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+
+ static __INLINE q31_t arm_bilinear_interp_q31(
+ arm_bilinear_interp_instance_q31 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q31_t out; /* Temporary output */
+ q31_t acc = 0; /* output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q31_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q31_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & 0xFFF00000) >> 20u);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & 0xFFF00000) >> 20u);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* shift left xfract by 11 to keep 1.31 format */
+ xfract = (X & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + nCols * (cI)];
+ x2 = pYData[(rI) + nCols * (cI) + 1u];
+
+ /* 20 bits for the fractional part */
+ /* shift left yfract by 11 to keep 1.31 format */
+ yfract = (Y & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + nCols * (cI + 1)];
+ y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */
+ out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32));
+ acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32));
+
+ /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (xfract) >> 32));
+
+ /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y2 * (xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* Convert acc to 1.31(q31) format */
+ return (acc << 2u);
+
+ }
+
+ /**
+ * @brief Q15 bilinear interpolation.
+ * @param[in,out] *S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+
+ static __INLINE q15_t arm_bilinear_interp_q15(
+ arm_bilinear_interp_instance_q15 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q15_t x1, x2, y1, y2; /* Nearest output values */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ int32_t rI, cI; /* Row and column indices */
+ q15_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & 0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & 0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + nCols * (cI)];
+ x2 = pYData[(rI) + nCols * (cI) + 1u];
+
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + nCols * (cI + 1)];
+ y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */
+
+ /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */
+ /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */
+ out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u);
+ acc = ((q63_t) out * (0xFFFFF - yfract));
+
+ /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u);
+ acc += ((q63_t) out * (xfract));
+
+ /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* acc is in 13.51 format and down shift acc by 36 times */
+ /* Convert out to 1.15 format */
+ return (acc >> 36);
+
+ }
+
+ /**
+ * @brief Q7 bilinear interpolation.
+ * @param[in,out] *S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+
+ static __INLINE q7_t arm_bilinear_interp_q7(
+ arm_bilinear_interp_instance_q7 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q7_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q7_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & 0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & 0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + nCols * (cI)];
+ x2 = pYData[(rI) + nCols * (cI) + 1u];
+
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + nCols * (cI + 1)];
+ y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */
+ out = ((x1 * (0xFFFFF - xfract)));
+ acc = (((q63_t) out * (0xFFFFF - yfract)));
+
+ /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */
+ out = ((x2 * (0xFFFFF - yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y1 * (0xFFFFF - xfract)));
+ acc += (((q63_t) out * (yfract)));
+
+ /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y2 * (yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */
+ return (acc >> 40);
+
+ }
+
+ /**
+ * @} end of BilinearInterpolate group
+ */
+
+
+//SMMLAR
+#define multAcc_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+//SMMLSR
+#define multSub_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+//SMMULR
+#define mult_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32)
+
+//SMMLA
+#define multAcc_32x32_keep32(a, x, y) \
+ a += (q31_t) (((q63_t) x * y) >> 32)
+
+//SMMLS
+#define multSub_32x32_keep32(a, x, y) \
+ a -= (q31_t) (((q63_t) x * y) >> 32)
+
+//SMMUL
+#define mult_32x32_keep32(a, x, y) \
+ a = (q31_t) (((q63_t) x * y ) >> 32)
+
+
+#if defined ( __CC_ARM ) //Keil
+
+//Enter low optimization region - place directly above function definition
+ #ifdef ARM_MATH_CM4
+ #define LOW_OPTIMIZATION_ENTER \
+ _Pragma ("push") \
+ _Pragma ("O1")
+ #else
+ #define LOW_OPTIMIZATION_ENTER
+ #endif
+
+//Exit low optimization region - place directly after end of function definition
+ #ifdef ARM_MATH_CM4
+ #define LOW_OPTIMIZATION_EXIT \
+ _Pragma ("pop")
+ #else
+ #define LOW_OPTIMIZATION_EXIT
+ #endif
+
+//Enter low optimization region - place directly above function definition
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+
+//Exit low optimization region - place directly after end of function definition
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__ICCARM__) //IAR
+
+//Enter low optimization region - place directly above function definition
+ #ifdef ARM_MATH_CM4
+ #define LOW_OPTIMIZATION_ENTER \
+ _Pragma ("optimize=low")
+ #else
+ #define LOW_OPTIMIZATION_ENTER
+ #endif
+
+//Exit low optimization region - place directly after end of function definition
+ #define LOW_OPTIMIZATION_EXIT
+
+//Enter low optimization region - place directly above function definition
+ #ifdef ARM_MATH_CM4
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \
+ _Pragma ("optimize=low")
+ #else
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #endif
+
+//Exit low optimization region - place directly after end of function definition
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__GNUC__)
+
+ #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") ))
+
+ #define LOW_OPTIMIZATION_EXIT
+
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__CSMC__) // Cosmic
+
+#define LOW_OPTIMIZATION_ENTER
+#define LOW_OPTIMIZATION_EXIT
+#define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+#define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__TASKING__) // TASKING
+
+#define LOW_OPTIMIZATION_ENTER
+#define LOW_OPTIMIZATION_EXIT
+#define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+#define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* _ARM_MATH_H */
+
+/**
+ *
+ * End of file.
+ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_sc000.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,864 @@
+/**************************************************************************//**
+ * @file core_sc000.h
+ * @brief CMSIS SC000 Core Peripheral Access Layer Header File
+ * @version V4.10
+ * @date 18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_SC000_H_GENERIC
+#define __CORE_SC000_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup SC000
+ @{
+ */
+
+/* CMSIS SC000 definitions */
+#define __SC000_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */
+#define __SC000_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16) | \
+ __SC000_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_SC (000) /*!< Cortex secure core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ ) /* Cosmic */
+ #if ( __CSMC__ & 0x400) // FPU present for parser
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC000_H_DEPENDANT
+#define __CORE_SC000_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __SC000_REV
+ #define __SC000_REV 0x0000
+ #warning "__SC000_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group SC000 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31 /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30 /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29 /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28 /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0 /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31 /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30 /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29 /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28 /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24 /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0 /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:1; /*!< bit: 0 Reserved */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1 /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED0[1];
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ uint32_t RESERVED1[154];
+ __IO uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of SC000 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if((int32_t)(IRQn) < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if((int32_t)(IRQn) < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+ }
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1) { __NOP(); } /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) {return (1UL);} /* Reload value impossible */
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_sc300.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,1675 @@
+/**************************************************************************//**
+ * @file core_sc300.h
+ * @brief CMSIS SC300 Core Peripheral Access Layer Header File
+ * @version V4.10
+ * @date 18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_SC300_H_GENERIC
+#define __CORE_SC300_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup SC3000
+ @{
+ */
+
+/* CMSIS SC300 definitions */
+#define __SC300_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */
+#define __SC300_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16) | \
+ __SC300_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_SC (300) /*!< Cortex secure core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ ) /* Cosmic */
+ #if ( __CSMC__ & 0x400) // FPU present for parser
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC300_H_DEPENDANT
+#define __CORE_SC300_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __SC300_REV
+ #define __SC300_REV 0x0000
+ #warning "__SC300_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group SC300 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31 /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30 /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29 /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28 /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27 /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0 /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31 /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30 /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29 /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28 /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27 /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25 /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24 /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0 /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1 /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0 /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+ uint32_t RESERVED1[129];
+ __IO uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ uint32_t RESERVED1[1];
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if((int32_t)IRQn < 0) {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if((int32_t)IRQn < 0) {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8 - __NVIC_PRIO_BITS)));
+ }
+ else {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8 - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1) { __NOP(); } /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); } /* Reload value impossible */
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0UL) { __NOP(); }
+ ITM->PORT[0].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/PeripheralNames.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,81 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+
+typedef enum {
+ DAC_1 = (int)DAC_BASE
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_5 = (int)SPI5_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ FMPI2C_1 = (int)FMPI2C1_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/PeripheralPins.c Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,178 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+//*** DAC ***
+
+const PinMap PinMap_DAC[] = {
+ {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 1, 0)}, // DAC_OUT1
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PB_14, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
+ {PC_7, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
+ {PC_9, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PA_8, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
+ {PB_15, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
+ {PC_6, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
+// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
+// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
+// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
+ {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
+ {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
+ {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
+// {PB_12, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
+ {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ {PC_4, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
+ {PC_5, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
+// {PC_10, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
+// {PC_11, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
+ {PC_12, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+ {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/PinNames.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,185 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
+#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PB_15,
+ SPI_MISO = PB_14,
+ SPI_SCK = PB_13,
+ SPI_CS = PB_12,
+ PWM_OUT = PA_7,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/PortNames.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+// PortD = 3,
+// PortE = 4,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/device.h Fri Nov 20 10:00:12 2015 +0000 @@ -0,0 +1,71 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 1 +#define LED_RED LED1 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/objects.h Fri Nov 20 10:00:12 2015 +0000
@@ -0,0 +1,113 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+ uint8_t channel;
+};
+
+struct dac_s {
+ DACName dac;
+ uint8_t channel;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+ uint8_t channel;
+ uint8_t inverted;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/PeripheralNames.h Thu Nov 19 13:45:10 2015 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/PeripheralNames.h Fri Nov 20 10:00:12 2015 +0000
@@ -68,7 +68,8 @@
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
+ I2C_3 = (int)I2C3_BASE,
+ FMPI2C_1 = (int)FMPI2C1_BASE
} I2CName;
typedef enum {
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/i2c_api.c Thu Nov 19 13:45:10 2015 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/i2c_api.c Fri Nov 20 10:00:12 2015 +0000
@@ -47,6 +47,7 @@
int i2c1_inited = 0;
int i2c2_inited = 0;
int i2c3_inited = 0;
+int fmpi2c1_inited = 0;
void i2c_init(i2c_t *obj, PinName sda, PinName scl)
{
@@ -77,6 +78,7 @@
pin_mode(sda, OpenDrain);
pin_mode(scl, OpenDrain);
}
+#if defined I2C3_BASE
// Enable I2C3 clock and pinout if not done
if ((obj->i2c == I2C_3) && !i2c3_inited) {
i2c3_inited = 1;
@@ -87,6 +89,20 @@
pin_mode(sda, OpenDrain);
pin_mode(scl, OpenDrain);
}
+#endif
+
+#if defined FMPI2C1_BASE
+ // Enable I2C3 clock and pinout if not done
+ if ((obj->i2c == FMPI2C_1) && !fmpi2c1_inited) {
+ fmpi2c1_inited = 1;
+ __HAL_RCC_FMPI2C1_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+#endif
// Reset to clear pending flags if any
i2c_reset(obj);
@@ -315,10 +331,19 @@
__I2C2_FORCE_RESET();
__I2C2_RELEASE_RESET();
}
+#if defined I2C3_BASE
if (obj->i2c == I2C_3) {
__I2C3_FORCE_RESET();
__I2C3_RELEASE_RESET();
}
+#endif
+
+#if defined FMPI2C1_BASE
+ if (obj->i2c == FMPI2C_1) {
+ __HAL_RCC_FMPI2C1_FORCE_RESET();
+ __HAL_RCC_FMPI2C1_RELEASE_RESET();
+ }
+#endif
}
#if DEVICE_I2CSLAVE
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/pwmout_api.c Thu Nov 19 13:45:10 2015 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/pwmout_api.c Fri Nov 20 10:00:12 2015 +0000
@@ -51,19 +51,33 @@
obj->inverted = STM_PIN_INVERTED(function);
// Enable TIM clock
+#if defined(TIM1_BASE)
if (obj->pwm == PWM_1) __HAL_RCC_TIM1_CLK_ENABLE();
+#endif
+#if defined(TIM2_BASE)
if (obj->pwm == PWM_2) __HAL_RCC_TIM2_CLK_ENABLE();
+#endif
+#if defined(TIM3_BASE)
if (obj->pwm == PWM_3) __HAL_RCC_TIM3_CLK_ENABLE();
+#endif
+#if defined(TIM4_BASE)
if (obj->pwm == PWM_4) __HAL_RCC_TIM4_CLK_ENABLE();
+#endif
#if defined(TIM5_BASE)
if (obj->pwm == PWM_5) __HAL_RCC_TIM5_CLK_ENABLE();
-#endif
+#endif
#if defined(TIM8_BASE)
if (obj->pwm == PWM_8) __HAL_RCC_TIM8_CLK_ENABLE();
#endif
+#if defined(TIM9_BASE)
if (obj->pwm == PWM_9) __HAL_RCC_TIM9_CLK_ENABLE();
+#endif
+#if defined(TIM10_BASE)
if (obj->pwm == PWM_10) __HAL_RCC_TIM10_CLK_ENABLE();
+#endif
+#if defined(TIM11_BASE)
if (obj->pwm == PWM_11) __HAL_RCC_TIM11_CLK_ENABLE();
+#endif
#if defined(TIM12_BASE)
if (obj->pwm == PWM_12) __HAL_RCC_TIM12_CLK_ENABLE();
#endif
@@ -179,10 +193,18 @@
switch (obj->pwm) {
// APB1 clock
+#if defined(TIM2_BASE)
case PWM_2:
+#endif
+#if defined(TIM3_BASE)
case PWM_3:
+#endif
+#if defined(TIM4_BASE)
case PWM_4:
+#endif
+#if defined(TIM5_BASE)
case PWM_5:
+#endif
#if defined(TIM12_BASE)
case PWM_12:
#endif
@@ -197,13 +219,21 @@
break;
// APB2 clock
+#if defined(TIM1_BASE)
case PWM_1:
+#endif
#if defined(TIM8_BASE)
case PWM_8:
#endif
+#if defined(TIM9_BASE)
case PWM_9:
+#endif
+#if defined(TIM10_BASE)
case PWM_10:
+#endif
+#if defined(TIM11_BASE)
case PWM_11:
+#endif
PclkFreq = HAL_RCC_GetPCLK2Freq();
APBxCLKDivider = RCC_ClkInitStruct.APB2CLKDivider;
break;
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/spi_api.c Thu Nov 19 13:45:10 2015 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/spi_api.c Fri Nov 20 10:00:12 2015 +0000
@@ -88,9 +88,11 @@
__HAL_RCC_SPI2_CLK_ENABLE();
}
+#if defined SPI3_BASE
if (obj->spi == SPI_3) {
__HAL_RCC_SPI3_CLK_ENABLE();
}
+#endif
#if defined SPI4_BASE
if (obj->spi == SPI_4) {
@@ -149,12 +151,13 @@
__HAL_RCC_SPI2_RELEASE_RESET();
__HAL_RCC_SPI2_CLK_DISABLE();
}
-
+#if defined SPI3_BASE
if (obj->spi == SPI_3) {
__HAL_RCC_SPI3_FORCE_RESET();
__HAL_RCC_SPI3_RELEASE_RESET();
__HAL_RCC_SPI3_CLK_DISABLE();
}
+#endif
#if defined SPI4_BASE
if (obj->spi == SPI_4) {
@@ -407,7 +410,48 @@
} else { // >= 20000000
obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 21 MHz
}
- }
+ }
+#elif defined(TARGET_STM32F410RB)
+ // Values depend of PCLK2: 100 MHz
+ if ((obj->spi == SPI_1) || (obj->spi == SPI_5)) {
+ if (hz < 700000) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 391 kHz
+ } else if ((hz >= 700000) && (hz < 1000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 781 kHz
+ } else if ((hz >= 1000000) && (hz < 3000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.56 MHz
+ } else if ((hz >= 3000000) && (hz < 6000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 3.13 MHz
+ } else if ((hz >= 6000000) && (hz < 12000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 6.25 MHz
+ } else if ((hz >= 12000000) && (hz < 25000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 12.5 MHz
+ } else if ((hz >= 25000000) && (hz < 50000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 25 MHz
+ } else { // >= 50000000
+ obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 50 MHz
+ }
+ }
+ // Values depend of PCLK1: 50 MHz
+ if (obj->spi == SPI_2) {
+ if (hz < 400000) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 195 kHz
+ } else if ((hz >= 400000) && (hz < 700000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 391 kHz
+ } else if ((hz >= 700000) && (hz < 1000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 781 MHz
+ } else if ((hz >= 1000000) && (hz < 3000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.56 MHz
+ } else if ((hz >= 3000000) && (hz < 6000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3.13 MHz
+ } else if ((hz >= 6000000) && (hz < 12000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6.25 MHz
+ } else if ((hz >= 12000000) && (hz < 25000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12.5 MHz
+ } else { // >= 25000000
+ obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 25 MHz
+ }
+ }
#endif
init_spi(obj);
}