Diff: N3310SPIConfig.h

Revision:

1:740d0a3999a9

Parent:

0:36fb749b83c7

--- a/N3310SPIConfig.h	Mon Dec 07 17:24:52 2009 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/*
-* N3310LCD. A program to interface mbed with the nuelectronics
-* Nokia 3310 LCD shield from www.nuelectronics.com. Ported from
-* the nuelectronics Arduino code.
-*
-* Copyright (C) <2009> Petras Saduikis <petras@petras.co.uk>
-*
-* This file is part of N3310LCD.
-*
-* N3310LCD is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 3 of the License, or
-* (at your option) any later version.
-* 
-* N3310LCD is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with N3310LCD.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef SNATCH59_N3310SPICONFIG_H
-#define SNATCH59_N3310SPICONFIG_H
-
-#include <mbed.h>
-
-class N3310SPIPort
-{
-public:
-    static const PinName MOSI;       // Master Out Slave In
-    static const PinName MISO;       // Master In Slave Out
-    static const PinName SCK;        // SPI clock
-    static const PinName CE;         // Chip Enable (aka Chip Select)
-    static const PinName LCD_RST;    // LCD reset
-    static const PinName DAT_CMD;    // indicates if the SPI write is command or date
-    static const PinName BL_ON;      // Back Light On
-    
-    static const PinName AD0;   // analog in for joystick
-};
-
-// NOTE pins have been chosen not to conflict with any I2C usage. 
-// MOSI = p5, MISO = p6, SCK = p7 is also an option
-const PinName N3310SPIPort::MOSI = p11;
-const PinName N3310SPIPort::MISO = p12;   // not used for 3310
-const PinName N3310SPIPort::SCK = p13;
-
-const PinName N3310SPIPort::CE = p21;
-const PinName N3310SPIPort::LCD_RST = p22;
-const PinName N3310SPIPort::DAT_CMD = p23;
-const PinName N3310SPIPort::BL_ON = p24;
-
-const PinName N3310SPIPort::AD0 = p20;    // joystick analog
-
-/************************************************
-*
-* Nokia 3310 LCD Shield Pins
-* NOTE: the LCD shield must be powered from a 3.3V supply in order
-* for the joystick to be read correctly by the mbed analog in
-* (which operates on a range of 0 - 3.3V).
-*
-* Connector J3:
-* p13: SCK
-* p12: MISO (not used)
-* p11: MOSI
-* p10: CE
-* p9: LCD_RST
-* p8: DAT_CMD
-* 
-* Connector J1:
-* p7: BL_ON
-*
-* Connector J2:
-* p1 : AD0
-*
-**************************************************/
-
-#endif
\ No newline at end of file