Erik Olieman

Public repositories (41)


5 2889
Library for the MMA7660 triple axis accelerometer
35 2590
FastPWM Featured
Library that allows for higher resolution and speed than standard mbed PWM library using same syntax (drop-in replacement).
45 2327
MODSERIAL Featured
MODSERIAL with support for more devices
3 2075
Hello World program for MMA7660
3 1989
MPU6050 library that is kinda beta and will probably never leave beta but it might help some people.
5 1588
DS1820 Hello World
11 1284
SCLD peripheral of the KL46Z
13 1152
Class similar to AnalogIn that uses burst mode to run continious background conversions so when the input is read, the last value can immediatly be returned.
25 1048
WakeUp Featured
Wake-up timer library to wake from deepsleep/power-down
2 829
RTC
Allows easy usage of the LPC1768 RTC interrupts
16 673
Library for reading temperature from DS1820, DS18B20 and DS1822
12 668
Software serial, for when you are out of serial pins
23 600
Replacement for regular GPIO (DigitalIn, DigitalOut, DigitalInOut) classes which has superior speed.
14 582
Class to be able to send SPI data with almost no overhead, useful at very high speeds.
11 455
Inherit from SoftSerial and use software buffers for TX and RX. This allows the SoftSerial to operate in a IRQ driven mode. Overrides most (but not all) stdio functions as ...
9 320
Class that combined FATFileSystem with a USBMSD device, similar to LocalFileSystem
12 316
IAP code for Freescale platforms
1 199
Interrupt based I2C functionality for the LPC1768. (If you want the other one, send a PM and I might make it). Also adds buffer functionality to the I2C bus.
2 185
HelloWorld program showing SimpleDMA with mainly UART stuff
6 182
RAMDisk example for the USBFileSystem
10 169
DMA library for the KL25Z
4 168
Helloworld program for the S25FL216K flash memory in combination with USBFileSystem
2 166
DS1302 Hello World program
5 142
Uses DMA to read/write SPI blocks, while putting the current thread in Wait state.
31 125
MODSERIAL with support for KL25Z + RTOS (beta, putc + puts currently)
3 121
Simple helloworld program to show reduced overhead of SDFileSystem-RTOS
2 119
Library to make use of the DS1302 timekeeping IC. The functions are identical to those used by the mbed RTC's
5 98
SDFileSystem which uses SimpleDMA to efficiently write to the SD card, while other Threads in the RTOS continue running
13 90
Example of a Serial bootloader for the K64F platform
2 79
Example of using sleep/deepsleep with the LPC812
2 68
Basic library for interfacing the AK8975 using I2C. It does not include more advanced functions. The datasheet does not include what the self-test should return for example, so this library ...
1 63
Simple clock program for LPC1768 Mini-DK
3 61
Implementation of a LocalFileSystem using S25FL216K serial flash memory. Currently only 256kB available!
2 50
Serial flash memory, binary access
2 37
Class similar to InterruptIn which allows the LPC1114 to wake from deepsleep. (For other targets you can use InterruptIn).
2 34
Background calibration for magnetometers, both gain and offset errors are removed (hard/soft iron).
2 31
A software I2C interface which is a drop-in replacement for the regular mbed I2C interface in case you run out of I2C ports
1 24
Library for Si114x optical sensors. Currently intended for the Si1146, although it will work also for the Si1145, and without full functionality for the Si1147
2 22
Example code to create a heartbeat sensor using the Si1146 on Silicon Lab's Biometrics expansion board for the Wonder Gecko
1 15
SDFileSystem example for the Wi-Go2 module