Diff: MPU6050.cpp

Revision:

0:897889ddd75a

diff -r 000000000000 -r 897889ddd75a MPU6050.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MPU6050.cpp	Tue Jul 08 05:38:58 2014 +0000
@@ -0,0 +1,236 @@
+#include "MPU6050.h"
+
+//MPU6050::MPU6050(PinName sda, PinName scl) : connection(sda, scl) {
+MPU6050::MPU6050(I2C *arg_i2c){
+    connection = arg_i2c;
+    this->setSleepMode(false);
+    
+    //Initializations:
+    currentGyroRange = 0;
+    currentAcceleroRange=0;
+}
+
+//--------------------------------------------------
+//-------------------General------------------------
+//--------------------------------------------------
+
+void MPU6050::write(char address, char data) {
+    char temp[2];
+    temp[0]=address;
+    temp[1]=data;
+    
+    connection->write(MPU6050_ADDRESS * 2,temp,2);
+}
+
+char MPU6050::read(char address) {
+    char retval;
+    connection->write(MPU6050_ADDRESS * 2, &address, 1, true);
+    connection->read(MPU6050_ADDRESS * 2, &retval, 1);
+    return retval;
+}
+
+void MPU6050::read(char address, char *data, int length) {
+    connection->write(MPU6050_ADDRESS * 2, &address, 1, true);
+    connection->read(MPU6050_ADDRESS * 2, data, length);
+}
+
+void MPU6050::setSleepMode(bool state) {
+    char temp;
+    temp = this->read(MPU6050_PWR_MGMT_1_REG);
+    if (state == true)
+        temp |= 1<<MPU6050_SLP_BIT;
+    if (state == false)
+        temp &= ~(1<<MPU6050_SLP_BIT);
+    this->write(MPU6050_PWR_MGMT_1_REG, temp);
+}
+
+bool MPU6050::testConnection( void ) {
+    char temp;
+    temp = this->read(MPU6050_WHO_AM_I_REG);
+    return (temp == (MPU6050_ADDRESS & 0xFE));
+}
+
+void MPU6050::setBW(char BW) {
+    char temp;
+    BW=BW & 0x07;
+    temp = this->read(MPU6050_CONFIG_REG);
+    temp &= 0xF8;
+    temp = temp + BW;
+    this->write(MPU6050_CONFIG_REG, temp);
+}
+
+void MPU6050::setI2CBypass(bool state) {
+    char temp;
+    temp = this->read(MPU6050_INT_PIN_CFG);
+    if (state == true)
+        temp |= 1<<MPU6050_BYPASS_BIT;
+    if (state == false)
+        temp &= ~(1<<MPU6050_BYPASS_BIT);
+    this->write(MPU6050_INT_PIN_CFG, temp);
+}
+
+//--------------------------------------------------
+//----------------Accelerometer---------------------
+//--------------------------------------------------
+
+void MPU6050::setAcceleroRange( char range ) {
+    char temp;
+    range = range & 0x03;
+    currentAcceleroRange = range;
+    
+    temp = this->read(MPU6050_ACCELERO_CONFIG_REG);
+    temp &= ~(3<<3);
+    temp = temp + (range<<3);
+    this->write(MPU6050_ACCELERO_CONFIG_REG, temp);
+}
+
+int MPU6050::getAcceleroRawX( void ) {
+    short retval;
+    char data[2];
+    this->read(MPU6050_ACCEL_XOUT_H_REG, data, 2);
+    retval = (data[0]<<8) + data[1];
+    return (int)retval;
+}
+    
+int MPU6050::getAcceleroRawY( void ) {
+    short retval;
+    char data[2];
+    this->read(MPU6050_ACCEL_YOUT_H_REG, data, 2);
+    retval = (data[0]<<8) + data[1];
+    return (int)retval;
+}
+
+int MPU6050::getAcceleroRawZ( void ) {
+    short retval;
+    char data[2];
+    this->read(MPU6050_ACCEL_ZOUT_H_REG, data, 2);
+    retval = (data[0]<<8) + data[1];
+    return (int)retval;
+}
+
+void MPU6050::getAcceleroRaw( int *data ) {
+    char temp[6];
+    this->read(MPU6050_ACCEL_XOUT_H_REG, temp, 6);
+    data[0] = (int)(short)((temp[0]<<8) + temp[1]);
+    data[1] = (int)(short)((temp[2]<<8) + temp[3]);
+    data[2] = (int)(short)((temp[4]<<8) + temp[5]);
+}
+
+void MPU6050::getAccelero( float *data ) {
+    int temp[3];
+    this->getAcceleroRaw(temp);
+    if (currentAcceleroRange == MPU6050_ACCELERO_RANGE_2G) {
+        data[0]=(float)temp[0] / 16384.0 * 9.81;
+        data[1]=(float)temp[1] / 16384.0 * 9.81;
+        data[2]=(float)temp[2] / 16384.0 * 9.81;
+        }
+    if (currentAcceleroRange == MPU6050_ACCELERO_RANGE_4G){
+        data[0]=(float)temp[0] / 8192.0 * 9.81;
+        data[1]=(float)temp[1] / 8192.0 * 9.81;
+        data[2]=(float)temp[2] / 8192.0 * 9.81;
+        }
+    if (currentAcceleroRange == MPU6050_ACCELERO_RANGE_8G){
+        data[0]=(float)temp[0] / 4096.0 * 9.81;
+        data[1]=(float)temp[1] / 4096.0 * 9.81;
+        data[2]=(float)temp[2] / 4096.0 * 9.81;
+        }
+    if (currentAcceleroRange == MPU6050_ACCELERO_RANGE_16G){
+        data[0]=(float)temp[0] / 2048.0 * 9.81;
+        data[1]=(float)temp[1] / 2048.0 * 9.81;
+        data[2]=(float)temp[2] / 2048.0 * 9.81;
+        }
+    
+    #ifdef DOUBLE_ACCELERO
+        data[0]*=2;
+        data[1]*=2;   
+        data[2]*=2;
+    #endif   
+}
+
+//--------------------------------------------------
+//------------------Gyroscope-----------------------
+//--------------------------------------------------
+void MPU6050::setGyroRange( char range ) {
+    char temp;
+    currentGyroRange = range;
+    range = range & 0x03;
+    temp = this->read(MPU6050_GYRO_CONFIG_REG);
+    temp &= ~(3<<3);
+    temp = temp + range<<3;
+    this->write(MPU6050_GYRO_CONFIG_REG, temp);
+}
+
+int MPU6050::getGyroRawX( void ) {
+    short retval;
+    char data[2];
+    this->read(MPU6050_GYRO_XOUT_H_REG, data, 2);
+    retval = (data[0]<<8) + data[1];
+    return (int)retval;
+}
+    
+int MPU6050::getGyroRawY( void ) {
+    short retval;
+    char data[2];
+    this->read(MPU6050_GYRO_YOUT_H_REG, data, 2);
+    retval = (data[0]<<8) + data[1];
+    return (int)retval;
+}
+
+int MPU6050::getGyroRawZ( void ) {
+    short retval;
+    char data[2];
+    this->read(MPU6050_GYRO_ZOUT_H_REG, data, 2);
+    retval = (data[0]<<8) + data[1];
+    return (int)retval;
+}
+
+void MPU6050::getGyroRaw( int *data ) {
+    char temp[6];
+    this->read(MPU6050_GYRO_XOUT_H_REG, temp, 6);
+    data[0] = (int)(short)((temp[0]<<8) + temp[1]);
+    data[1] = (int)(short)((temp[2]<<8) + temp[3]);
+    data[2] = (int)(short)((temp[4]<<8) + temp[5]);
+}
+
+void MPU6050::getGyro( float *data ) {
+    int temp[3];
+    this->getGyroRaw(temp);
+    if (currentGyroRange == MPU6050_GYRO_RANGE_250) {
+        data[0]=(float)temp[0] / 7505.7;
+        data[1]=(float)temp[1] / 7505.7;
+        data[2]=(float)temp[2] / 7505.7;
+        }
+    if (currentGyroRange == MPU6050_GYRO_RANGE_500){
+        data[0]=(float)temp[0] / 3752.9;
+        data[1]=(float)temp[1] / 3752.9;
+        data[2]=(float)temp[2] / 3752.9;
+        }
+    if (currentGyroRange == MPU6050_GYRO_RANGE_1000){
+        data[0]=(float)temp[0] / 1879.3;
+        data[1]=(float)temp[1] / 1879.3;
+        data[2]=(float)temp[2] / 1879.3;
+        }
+    if (currentGyroRange == MPU6050_GYRO_RANGE_2000){
+        data[0]=(float)temp[0] / 939.7;
+        data[1]=(float)temp[1] / 939.7;
+        data[2]=(float)temp[2] / 939.7;
+        }
+}
+//--------------------------------------------------
+//-------------------Temperature--------------------
+//--------------------------------------------------
+int MPU6050::getTempRaw( void ) {
+    short retval;
+    char data[2];
+    this->read(MPU6050_TEMP_H_REG, data, 2);
+    retval = (data[0]<<8) + data[1];
+    return (int)retval;
+}
+
+float MPU6050::getTemp( void ) {
+    float retval;
+    retval=(float)this->getTempRaw();
+    retval=(retval+521.0)/340.0+35.0;
+    return retval;
+}
+