File content as of revision 8:0380b34047ad:

/**
 * @section DESCRIPTION
 * N3310LCD. A program to interface mbed with the nuelectronics
 * Nokia 3310 LCD shield from www.nuelectronics.com. Ported from
 * the nuelectronics Arduino code.
 *
 * @section LICENSE
 *
 * Copyright (C) <2009> Petras Saduikis <petras@petras.co.uk>
 *
 * Converted to a mbed library by Andrew D. Lindsay
 *
 * This file is part of N3310LCD.
 *
 * N3310LCD is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * N3310LCD is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with N3310LCD.  If not, see <http://www.gnu.org/licenses/>.
 */

#ifndef N3310SPICONFIG_H
#define N3310SPICONFIG_H

#include <mbed.h>

class N3310SPIPort
{
public:
    static const PinName MOSI;       // Master Out Slave In
    static const PinName MISO;       // Master In Slave Out
    static const PinName SCK;        // SPI clock
    static const PinName CE;         // Chip Enable (aka Chip Select)
    static const PinName LCD_RST;    // LCD reset
    static const PinName DAT_CMD;    // indicates if the SPI write is command or date
    static const PinName BL_ON;      // Back Light On

    static const PinName AD0;   // analog in for joystick
};

// NOTE pins have been chosen not to conflict with any I2C usage.
// MOSI = p5, MISO = p6, SCK = p7 is also an option
const PinName N3310SPIPort::MOSI = p11;
const PinName N3310SPIPort::MISO = p12;   // not used for 3310
const PinName N3310SPIPort::SCK = p13;

const PinName N3310SPIPort::CE = p10;       // was p21;
const PinName N3310SPIPort::LCD_RST = p9;   // was p22;
const PinName N3310SPIPort::DAT_CMD = p8;   // was p23;
const PinName N3310SPIPort::BL_ON = p24;

const PinName N3310SPIPort::AD0 = p20;    // joystick analog

/************************************************
* 
* Nokia 3310 LCD Shield Pins
* NOTE: the LCD shield must be powered from a 3.3V supply in order
* for the joystick to be read correctly by the mbed analog in
* (which operates on a range of 0 - 3.3V).
*
* Connector J3:
* p13: SCK
* p12: MISO (not used)
* p11: MOSI
* p10: CE
* p9: LCD_RST
* p8: DAT_CMD
*
* Connector J1:
* p7: BL_ON
*
* Connector J2:
* p1 : AD0
*
**************************************************/

#endif