Rob Kluin
config changes
Fork of
nRF51822
by 
Nordic Semiconductor
Diff: TARGET_NRF5/source/btle/custom/custom_helper.cpp
- Revision:
- 638:c90ae1400bf2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NRF5/source/btle/custom/custom_helper.cpp Wed Sep 14 14:39:43 2016 +0100
@@ -0,0 +1,364 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "custom_helper.h"
+
+/*
+ * The current version of the soft-device doesn't handle duplicate 128-bit UUIDs
+ * very well. It is therefore necessary to filter away duplicates before
+ * passing long UUIDs to sd_ble_uuid_vs_add(). The following types and data
+ * structures involved in maintaining a local cache of 128-bit UUIDs.
+ */
+typedef struct {
+ UUID::LongUUIDBytes_t uuid;
+ uint8_t type;
+} converted_uuid_table_entry_t;
+
+static unsigned uuidTableEntries = 0; /* current usage of the table */
+converted_uuid_table_entry_t convertedUUIDTable[UUID_TABLE_MAX_ENTRIES];
+
+void custom_reset_128bits_uuid_table() {
+ uuidTableEntries = 0;
+}
+
+/**
+ * lookup the cache of previously converted 128-bit UUIDs to find a type value.
+ * @param uuid base 128-bit UUID
+ * @param recoveredType the type field of the 3-byte nRF's uuid.
+ * @return true if a match is found.
+ */
+static bool
+lookupConvertedUUIDTable(const UUID::LongUUIDBytes_t uuid, uint8_t *recoveredType)
+{
+ unsigned i;
+ for (i = 0; i < uuidTableEntries; i++) {
+ unsigned byteIndex;
+ for (byteIndex = 0; byteIndex < UUID::LENGTH_OF_LONG_UUID; byteIndex++) {
+ /* Skip bytes 2 and 3, because they contain the shortUUID (16-bit) version of the
+ * long UUID; and we're comparing against the remainder. */
+ if ((byteIndex == 2) || (byteIndex == 3)) {
+ continue;
+ }
+
+ if (convertedUUIDTable[i].uuid[byteIndex] != uuid[byteIndex]) {
+ break;
+ }
+ }
+
+ if (byteIndex == UUID::LENGTH_OF_LONG_UUID) {
+ *recoveredType = convertedUUIDTable[i].type;
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static void
+addToConvertedUUIDTable(const UUID::LongUUIDBytes_t uuid, uint8_t type)
+{
+ if (uuidTableEntries == UUID_TABLE_MAX_ENTRIES) {
+ return; /* recovery needed; or at least the user should be warned about this fact.*/
+ }
+
+ memcpy(convertedUUIDTable[uuidTableEntries].uuid, uuid, UUID::LENGTH_OF_LONG_UUID);
+ convertedUUIDTable[uuidTableEntries].uuid[2] = 0;
+ convertedUUIDTable[uuidTableEntries].uuid[3] = 0;
+ convertedUUIDTable[uuidTableEntries].type = type;
+ uuidTableEntries++;
+}
+
+/**
+ * The nRF transport has its own 3-byte representation of a UUID. If the user-
+ * specified UUID is 128-bits wide, then the UUID base needs to be added to the
+ * soft-device and converted to a 3-byte handle before being used further. This
+ * function is responsible for this translation of user-specified UUIDs into
+ * nRF's representation.
+ *
+ * @param[in] uuid
+ * user-specified UUID
+ * @return nRF
+ * 3-byte UUID (containing a type and 16-bit UUID) representation
+ * to be used with SVC calls.
+ */
+ble_uuid_t custom_convert_to_nordic_uuid(const UUID &uuid)
+{
+ ble_uuid_t nordicUUID;
+ nordicUUID.uuid = uuid.getShortUUID();
+ nordicUUID.type = BLE_UUID_TYPE_UNKNOWN; /* to be set below */
+
+ if (uuid.shortOrLong() == UUID::UUID_TYPE_SHORT) {
+ nordicUUID.type = BLE_UUID_TYPE_BLE;
+ } else {
+ if (!lookupConvertedUUIDTable(uuid.getBaseUUID(), &nordicUUID.type)) {
+ nordicUUID.type = custom_add_uuid_base(uuid.getBaseUUID());
+ addToConvertedUUIDTable(uuid.getBaseUUID(), nordicUUID.type);
+ }
+ }
+
+ return nordicUUID;
+}
+
+/**************************************************************************/
+/*!
+ @brief Adds the base UUID to the custom service. All UUIDs used
+ by this service are based on this 128-bit UUID.
+
+ @note This UUID needs to be added to the SoftDevice stack before
+ adding the service's primary service via
+ 'sd_ble_gatts_service_add'
+
+ @param[in] p_uuid_base A pointer to the 128-bit UUID array (8*16)
+
+ @returns The UUID type.
+ A return value of 0 should be considered an error.
+
+ @retval 0x00 BLE_UUID_TYPE_UNKNOWN
+ @retval 0x01 BLE_UUID_TYPE_BLE
+ @retval 0x02 BLE_UUID_TYPE_VENDOR_BEGIN
+
+ @section EXAMPLE
+ @code
+
+ // Take note that bytes 2/3 are blank since these are used to identify
+ // the primary service and individual characteristics
+ #define CFG_CUSTOM_UUID_BASE "\x6E\x40\x00\x00\xB5\xA3\xF3\x93\xE0\xA9\xE5\x0E\x24\xDC\xCA\x9E"
+
+ uint8_t uuid_type = custom_add_uuid_base(CFG_CUSTOM_UUID_BASE);
+ ASSERT(uuid_type > 0, ERROR_NOT_FOUND);
+
+ // We can now safely add the primary service and any characteristics
+ // for our custom service ...
+
+ @endcode
+*/
+/**************************************************************************/
+uint8_t custom_add_uuid_base(uint8_t const *const p_uuid_base)
+{
+ ble_uuid128_t base_uuid;
+ uint8_t uuid_type = 0;
+
+ for (unsigned i = 0; i < UUID::LENGTH_OF_LONG_UUID; i++) {
+ base_uuid.uuid128[i] = p_uuid_base[i];
+ }
+
+ ASSERT_INT( ERROR_NONE, sd_ble_uuid_vs_add( &base_uuid, &uuid_type ), 0);
+
+ return uuid_type;
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+error_t custom_decode_uuid_base(uint8_t const *const p_uuid_base,
+ ble_uuid_t *p_uuid)
+{
+ UUID::LongUUIDBytes_t uuid_base_le;
+
+ for (uint8_t i = 0; i < UUID::LENGTH_OF_LONG_UUID; i++) {
+ uuid_base_le[i] = p_uuid_base[i];
+ }
+
+ ASSERT_STATUS( sd_ble_uuid_decode(UUID::LENGTH_OF_LONG_UUID, uuid_base_le, p_uuid));
+
+ return ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Adds a new characteristic to the custom service, assigning
+ properties, a UUID add-on value, etc.
+
+ @param[in] service_handle
+ @param[in] p_uuid The 16-bit value to add to the base UUID
+ for this characteristic (normally >1
+ since 1 is typically used by the primary
+ service).
+ @param[in] char_props The characteristic properties, as
+ defined by ble_gatt_char_props_t
+ @param[in] max_length The maximum length of this characeristic
+ @param[in] has_variable_len Whether the characteristic data has
+ variable length.
+ @param[out] p_char_handle
+
+ @returns
+ @retval ERROR_NONE Everything executed normally
+*/
+/**************************************************************************/
+error_t custom_add_in_characteristic(uint16_t service_handle,
+ ble_uuid_t *p_uuid,
+ uint8_t properties,
+ SecurityManager::SecurityMode_t requiredSecurity,
+ uint8_t *p_data,
+ uint16_t length,
+ uint16_t max_length,
+ bool has_variable_len,
+ const uint8_t *userDescriptionDescriptorValuePtr,
+ uint16_t userDescriptionDescriptorValueLen,
+ bool readAuthorization,
+ bool writeAuthorization,
+ ble_gatts_char_handles_t *p_char_handle)
+{
+ /* Characteristic metadata */
+ ble_gatts_attr_md_t cccd_md;
+ ble_gatt_char_props_t char_props;
+
+ memcpy(&char_props, &properties, 1);
+
+ if (char_props.notify || char_props.indicate) {
+ /* Notification requires cccd */
+ memclr_( &cccd_md, sizeof(ble_gatts_attr_md_t));
+ cccd_md.vloc = BLE_GATTS_VLOC_STACK;
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.read_perm);
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.write_perm);
+ }
+
+ ble_gatts_char_md_t char_md = {0};
+
+ char_md.char_props = char_props;
+ char_md.p_cccd_md =
+ (char_props.notify || char_props.indicate) ? &cccd_md : NULL;
+ if ((userDescriptionDescriptorValueLen > 0) && (userDescriptionDescriptorValuePtr != NULL)) {
+ char_md.p_char_user_desc = const_cast<uint8_t *>(userDescriptionDescriptorValuePtr);
+ char_md.char_user_desc_max_size = userDescriptionDescriptorValueLen;
+ char_md.char_user_desc_size = userDescriptionDescriptorValueLen;
+ }
+
+ /* Attribute declaration */
+ ble_gatts_attr_md_t attr_md = {0};
+
+ attr_md.rd_auth = readAuthorization;
+ attr_md.wr_auth = writeAuthorization;
+
+ attr_md.vloc = BLE_GATTS_VLOC_STACK;
+ /* Always set variable size */
+ attr_md.vlen = has_variable_len;
+
+ if (char_props.read || char_props.notify || char_props.indicate) {
+ switch (requiredSecurity) {
+ case SecurityManager::SECURITY_MODE_ENCRYPTION_OPEN_LINK :
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&attr_md.read_perm);
+ break;
+ case SecurityManager::SECURITY_MODE_ENCRYPTION_NO_MITM :
+ BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&attr_md.read_perm);
+ break;
+ case SecurityManager::SECURITY_MODE_ENCRYPTION_WITH_MITM :
+ BLE_GAP_CONN_SEC_MODE_SET_ENC_WITH_MITM(&attr_md.read_perm);
+ break;
+ case SecurityManager::SECURITY_MODE_SIGNED_NO_MITM :
+ BLE_GAP_CONN_SEC_MODE_SET_SIGNED_NO_MITM(&attr_md.read_perm);
+ break;
+ case SecurityManager::SECURITY_MODE_SIGNED_WITH_MITM :
+ BLE_GAP_CONN_SEC_MODE_SET_SIGNED_WITH_MITM(&attr_md.read_perm);
+ break;
+ default:
+ break;
+ };
+ }
+
+ if (char_props.write || char_props.write_wo_resp) {
+ switch (requiredSecurity) {
+ case SecurityManager::SECURITY_MODE_ENCRYPTION_OPEN_LINK :
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&attr_md.write_perm);
+ break;
+ case SecurityManager::SECURITY_MODE_ENCRYPTION_NO_MITM :
+ BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&attr_md.write_perm);
+ break;
+ case SecurityManager::SECURITY_MODE_ENCRYPTION_WITH_MITM :
+ BLE_GAP_CONN_SEC_MODE_SET_ENC_WITH_MITM(&attr_md.write_perm);
+ break;
+ case SecurityManager::SECURITY_MODE_SIGNED_NO_MITM :
+ BLE_GAP_CONN_SEC_MODE_SET_SIGNED_NO_MITM(&attr_md.write_perm);
+ break;
+ case SecurityManager::SECURITY_MODE_SIGNED_WITH_MITM :
+ BLE_GAP_CONN_SEC_MODE_SET_SIGNED_WITH_MITM(&attr_md.write_perm);
+ break;
+ default:
+ break;
+ };
+ }
+
+ ble_gatts_attr_t attr_char_value = {0};
+
+ attr_char_value.p_uuid = p_uuid;
+ attr_char_value.p_attr_md = &attr_md;
+ attr_char_value.init_len = length;
+ attr_char_value.max_len = max_length;
+ attr_char_value.p_value = p_data;
+
+ ASSERT_STATUS ( sd_ble_gatts_characteristic_add(service_handle,
+ &char_md,
+ &attr_char_value,
+ p_char_handle));
+
+ return ERROR_NONE;
+}
+
+
+
+/**************************************************************************/
+/*!
+ @brief Adds a new descriptor to the custom service, assigning
+ value, a UUID add-on value, etc.
+
+ @param[in] char_handle
+ @param[in] p_uuid The 16-bit value to add to the base UUID
+ for this descriptor (normally >1
+ since 1 is typically used by the primary
+ service).
+ @param[in] max_length The maximum length of this descriptor
+ @param[in] has_variable_len Whether the characteristic data has
+ variable length.
+
+ @returns
+ @retval ERROR_NONE Everything executed normally
+*/
+/**************************************************************************/
+error_t custom_add_in_descriptor(uint16_t char_handle,
+ ble_uuid_t *p_uuid,
+ uint8_t *p_data,
+ uint16_t length,
+ uint16_t max_length,
+ bool has_variable_len,
+ uint16_t *p_desc_handle)
+{
+ /* Descriptor metadata */
+ ble_gatts_attr_md_t desc_md = {0};
+
+ desc_md.vloc = BLE_GATTS_VLOC_STACK;
+ /* Always set variable size */
+ desc_md.vlen = has_variable_len;
+
+ /* Make it readable and writable */
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&desc_md.read_perm);
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&desc_md.write_perm);
+
+ ble_gatts_attr_t attr_desc = {0};
+
+ attr_desc.p_uuid = p_uuid;
+ attr_desc.p_attr_md = &desc_md;
+ attr_desc.init_len = length;
+ attr_desc.max_len = max_length;
+ attr_desc.p_value = p_data;
+
+ ASSERT_STATUS ( sd_ble_gatts_descriptor_add(char_handle,
+ &attr_desc,
+ p_desc_handle));
+
+ return ERROR_NONE;
+}