LoRa send is causing hang-up when a gps fix is acquired
Dependencies: mbed LoRaWAN-lib_publishing_testing_UART_bug SingleFrequencyLora
Fork of simple-demo-76_revised_20171113_copy by
Diff: app/main.cpp
- Revision:
- 10:9364ab3a08eb
- Parent:
- 9:ee9dcbb9708d
- Child:
- 11:32323f490d9e
--- a/app/main.cpp Mon Apr 24 13:38:31 2017 +0000 +++ b/app/main.cpp Mon Oct 30 10:51:44 2017 +0000 @@ -15,951 +15,105 @@ #include "mbed.h" #include "board.h" #include "radio.h" - #include "LoRaMac.h" -#include "Commissioning.h" -#include "SerialDisplay.h" - -/*! - * Defines the application data transmission duty cycle. 5s, value in [ms]. - */ -#define APP_TX_DUTYCYCLE 5000 - -/*! - * Defines a random delay for application data transmission duty cycle. 1s, - * value in [ms]. - */ -#define APP_TX_DUTYCYCLE_RND 1000 -/*! - * Default datarate - */ -#define LORAWAN_DEFAULT_DATARATE DR_0 - -/*! - * LoRaWAN confirmed messages - */ -#define LORAWAN_CONFIRMED_MSG_ON true - -/*! - * LoRaWAN Adaptive Data Rate - * - * \remark Please note that when ADR is enabled the end-device should be static - */ -#define LORAWAN_ADR_ON 1 - -#if defined( USE_BAND_868 ) - -#include "LoRaMacTest.h" -/*! - * LoRaWAN ETSI duty cycle control enable/disable - * - * \remark Please note that ETSI mandates duty cycled transmissions. Use only for test purposes - */ -#define LORAWAN_DUTYCYCLE_ON false - -#define USE_SEMTECH_DEFAULT_CHANNEL_LINEUP 1 - -#if( USE_SEMTECH_DEFAULT_CHANNEL_LINEUP == 1 ) - -#define LC4 { 867100000, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } -#define LC5 { 867300000, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } -#define LC6 { 867500000, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } -#define LC7 { 867700000, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } -#define LC8 { 867900000, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } -#define LC9 { 868800000, { ( ( DR_7 << 4 ) | DR_7 ) }, 2 } -#define LC10 { 868300000, { ( ( DR_6 << 4 ) | DR_6 ) }, 1 } - -#endif - -#endif +#define APPDATA_SIZE 4 +#define LORAWAN_DEFAULT_DATARATE DR_0 +#define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x01234567 +#define LORAWAN_NWKSKEY { 0x11, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01 } +#define LORAWAN_APPSKEY { 0x11, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01 } -/*! - * LoRaWAN application port - */ -#define LORAWAN_APP_PORT 15 - -/*! - * User application data buffer size - */ -#if ( LORAWAN_CONFIRMED_MSG_ON == 1 ) -#define LORAWAN_APP_DATA_SIZE 6 - -#else -#define LORAWAN_APP_DATA_SIZE 1 - -#endif - -static uint8_t DevEui[] = LORAWAN_DEVICE_EUI; -static uint8_t AppEui[] = LORAWAN_APPLICATION_EUI; -static uint8_t AppKey[] = LORAWAN_APPLICATION_KEY; - -#if( OVER_THE_AIR_ACTIVATION == 0 ) - +uint8_t AppData[APPDATA_SIZE]; static uint8_t NwkSKey[] = LORAWAN_NWKSKEY; static uint8_t AppSKey[] = LORAWAN_APPSKEY; -/*! - * Device address - */ -static uint32_t DevAddr = LORAWAN_DEVICE_ADDRESS; -#endif - -/*! - * Application port - */ -static uint8_t AppPort = LORAWAN_APP_PORT; - -/*! - * User application data size - */ -static uint8_t AppDataSize = LORAWAN_APP_DATA_SIZE; - -/*! - * User application data buffer size - */ -#define LORAWAN_APP_DATA_MAX_SIZE 64 - -/*! - * User application data - */ -static uint8_t AppData[LORAWAN_APP_DATA_MAX_SIZE]; - -/*! - * Indicates if the node is sending confirmed or unconfirmed messages - */ -static uint8_t IsTxConfirmed = LORAWAN_CONFIRMED_MSG_ON; - -/*! - * Defines the application data transmission duty cycle - */ -static uint32_t TxDutyCycleTime; - -/*! - * Timer to handle the application data transmission duty cycle - */ -static TimerEvent_t TxNextPacketTimer; - -/*! - * Specifies the state of the application LED - */ -static bool AppLedStateOn = false; -volatile bool Led3StateChanged = false; -/*! - * Timer to handle the state of LED1 - */ -static TimerEvent_t Led1Timer; -volatile bool Led1State = false; -volatile bool Led1StateChanged = false; -/*! - * Timer to handle the state of LED2 - */ -static TimerEvent_t Led2Timer; -volatile bool Led2State = false; -volatile bool Led2StateChanged = false; - -/*! - * Indicates if a new packet can be sent - */ -static bool NextTx = true; - -/*! - * Device states - */ -static enum eDeviceState -{ - DEVICE_STATE_INIT, - DEVICE_STATE_JOIN, - DEVICE_STATE_SEND, - DEVICE_STATE_CYCLE, - DEVICE_STATE_SLEEP -}DeviceState; - -/*! - * LoRaWAN compliance tests support data - */ -struct ComplianceTest_s -{ - bool Running; - uint8_t State; - bool IsTxConfirmed; - uint8_t AppPort; - uint8_t AppDataSize; - uint8_t *AppDataBuffer; - uint16_t DownLinkCounter; - bool LinkCheck; - uint8_t DemodMargin; - uint8_t NbGateways; -}ComplianceTest; - -/* - * SerialDisplay managment variables - */ - -/*! - * Indicates if the MAC layer network join status has changed. - */ -static bool IsNetworkJoinedStatusUpdate = false; - -/*! - * Strucure containing the Uplink status - */ -struct sLoRaMacUplinkStatus -{ - uint8_t Acked; - int8_t Datarate; - uint16_t UplinkCounter; - uint8_t Port; - uint8_t *Buffer; - uint8_t BufferSize; -}LoRaMacUplinkStatus; -volatile bool UplinkStatusUpdated = false; - -/*! - * Strucure containing the Downlink status - */ -struct sLoRaMacDownlinkStatus -{ - int16_t Rssi; - int8_t Snr; - uint16_t DownlinkCounter; - bool RxData; - uint8_t Port; - uint8_t *Buffer; - uint8_t BufferSize; -}LoRaMacDownlinkStatus; -volatile bool DownlinkStatusUpdated = false; - -void SerialDisplayRefresh( void ) -{ - MibRequestConfirm_t mibReq; - - SerialDisplayInit( ); - SerialDisplayUpdateActivationMode( OVER_THE_AIR_ACTIVATION ); - -#if( OVER_THE_AIR_ACTIVATION == 0 ) - SerialDisplayUpdateNwkId( LORAWAN_NETWORK_ID ); - SerialDisplayUpdateDevAddr( DevAddr ); - SerialDisplayUpdateKey( 12, NwkSKey ); - SerialDisplayUpdateKey( 13, AppSKey ); -#endif - SerialDisplayUpdateEui( 5, DevEui ); - SerialDisplayUpdateEui( 6, AppEui ); - SerialDisplayUpdateKey( 7, AppKey ); - - mibReq.Type = MIB_NETWORK_JOINED; - LoRaMacMibGetRequestConfirm( &mibReq ); - SerialDisplayUpdateNetworkIsJoined( mibReq.Param.IsNetworkJoined ); - SerialDisplayUpdateAdr( LORAWAN_ADR_ON ); -#if defined( USE_BAND_868 ) - SerialDisplayUpdateDutyCycle( LORAWAN_DUTYCYCLE_ON ); -#else - SerialDisplayUpdateDutyCycle( false ); -#endif - SerialDisplayUpdatePublicNetwork( LORAWAN_PUBLIC_NETWORK ); - - SerialDisplayUpdateLedState( 3, AppLedStateOn ); -} - -void SerialRxProcess( void ) -{ - if( SerialDisplayReadable( ) == true ) - { - switch( SerialDisplayGetChar( ) ) - { - case 'R': - case 'r': - // Refresh Serial screen - SerialDisplayRefresh( ); - break; - default: - break; - } - } -} - -/*! - * \brief Prepares the payload of the frame - */ -static void PrepareTxFrame( uint8_t port ) -{ - switch( port ) - { - case 15: - { - AppData[0] = AppLedStateOn; - if( IsTxConfirmed == true ) - { - AppData[1] = LoRaMacDownlinkStatus.DownlinkCounter >> 8; - AppData[2] = LoRaMacDownlinkStatus.DownlinkCounter; - AppData[3] = LoRaMacDownlinkStatus.Rssi >> 8; - AppData[4] = LoRaMacDownlinkStatus.Rssi; - AppData[5] = LoRaMacDownlinkStatus.Snr; - } - } - break; - case 224: - if( ComplianceTest.LinkCheck == true ) - { - ComplianceTest.LinkCheck = false; - AppDataSize = 3; - AppData[0] = 5; - AppData[1] = ComplianceTest.DemodMargin; - AppData[2] = ComplianceTest.NbGateways; - ComplianceTest.State = 1; - } - else - { - switch( ComplianceTest.State ) - { - case 4: - ComplianceTest.State = 1; - break; - case 1: - AppDataSize = 2; - AppData[0] = ComplianceTest.DownLinkCounter >> 8; - AppData[1] = ComplianceTest.DownLinkCounter; - break; - } - } - break; - default: - break; - } -} - -/*! - * \brief Prepares the payload of the frame - * - * \retval [0: frame could be send, 1: error] - */ -static bool SendFrame( void ) +void McpsConfirm( McpsConfirm_t *mcpsConfirm ) { - McpsReq_t mcpsReq; - LoRaMacTxInfo_t txInfo; - - if( LoRaMacQueryTxPossible( AppDataSize, &txInfo ) != LORAMAC_STATUS_OK ) - { - // Send empty frame in order to flush MAC commands - mcpsReq.Type = MCPS_UNCONFIRMED; - mcpsReq.Req.Unconfirmed.fBuffer = NULL; - mcpsReq.Req.Unconfirmed.fBufferSize = 0; - mcpsReq.Req.Unconfirmed.Datarate = LORAWAN_DEFAULT_DATARATE; - - LoRaMacUplinkStatus.Acked = false; - LoRaMacUplinkStatus.Port = 0; - LoRaMacUplinkStatus.Buffer = NULL; - LoRaMacUplinkStatus.BufferSize = 0; - SerialDisplayUpdateFrameType( false ); - } - else - { - LoRaMacUplinkStatus.Acked = false; - LoRaMacUplinkStatus.Port = AppPort; - LoRaMacUplinkStatus.Buffer = AppData; - LoRaMacUplinkStatus.BufferSize = AppDataSize; - SerialDisplayUpdateFrameType( IsTxConfirmed ); - - if( IsTxConfirmed == false ) - { - mcpsReq.Type = MCPS_UNCONFIRMED; - mcpsReq.Req.Unconfirmed.fPort = AppPort; - mcpsReq.Req.Unconfirmed.fBuffer = AppData; - mcpsReq.Req.Unconfirmed.fBufferSize = AppDataSize; - mcpsReq.Req.Unconfirmed.Datarate = LORAWAN_DEFAULT_DATARATE; - } - else - { - mcpsReq.Type = MCPS_CONFIRMED; - mcpsReq.Req.Confirmed.fPort = AppPort; - mcpsReq.Req.Confirmed.fBuffer = AppData; - mcpsReq.Req.Confirmed.fBufferSize = AppDataSize; - mcpsReq.Req.Confirmed.NbTrials = 8; - mcpsReq.Req.Confirmed.Datarate = LORAWAN_DEFAULT_DATARATE; - } - } - - if( LoRaMacMcpsRequest( &mcpsReq ) == LORAMAC_STATUS_OK ) - { - return false; - } - return true; -} - -/*! - * \brief Function executed on TxNextPacket Timeout event - */ -static void OnTxNextPacketTimerEvent( void ) -{ - MibRequestConfirm_t mibReq; - LoRaMacStatus_t status; - - TimerStop( &TxNextPacketTimer ); - - mibReq.Type = MIB_NETWORK_JOINED; - status = LoRaMacMibGetRequestConfirm( &mibReq ); - - if( status == LORAMAC_STATUS_OK ) - { - if( mibReq.Param.IsNetworkJoined == true ) - { - DeviceState = DEVICE_STATE_SEND; - NextTx = true; - } - else - { - DeviceState = DEVICE_STATE_JOIN; - } - } -} - -/*! - * \brief Function executed on Led 1 Timeout event - */ -static void OnLed1TimerEvent( void ) -{ - TimerStop( &Led1Timer ); - // Switch LED 1 OFF - Led1State = false; - Led1StateChanged = true; + return; } -/*! - * \brief Function executed on Led 2 Timeout event - */ -static void OnLed2TimerEvent( void ) -{ - TimerStop( &Led2Timer ); - // Switch LED 2 OFF - Led2State = false; - Led2StateChanged = true; -} - -/*! - * \brief MCPS-Confirm event function - * - * \param [IN] mcpsConfirm - Pointer to the confirm structure, - * containing confirm attributes. - */ -static void McpsConfirm( McpsConfirm_t *mcpsConfirm ) +void McpsIndication( McpsIndication_t *mcpsIndication ) { - if( mcpsConfirm->Status == LORAMAC_EVENT_INFO_STATUS_OK ) - { - switch( mcpsConfirm->McpsRequest ) - { - case MCPS_UNCONFIRMED: - { - // Check Datarate - // Check TxPower - break; - } - case MCPS_CONFIRMED: - { - // Check Datarate - // Check TxPower - // Check AckReceived - // Check NbTrials - LoRaMacUplinkStatus.Acked = mcpsConfirm->AckReceived; - break; - } - case MCPS_PROPRIETARY: - { - break; - } - default: - break; - } - LoRaMacUplinkStatus.Datarate = mcpsConfirm->Datarate; - LoRaMacUplinkStatus.UplinkCounter = mcpsConfirm->UpLinkCounter; - - // Switch LED 1 ON - Led1State = true; - Led1StateChanged = true; - TimerStart( &Led1Timer ); - - UplinkStatusUpdated = true; - } - NextTx = true; + return; } -/*! - * \brief MCPS-Indication event function - * - * \param [IN] mcpsIndication - Pointer to the indication structure, - * containing indication attributes. - */ -static void McpsIndication( McpsIndication_t *mcpsIndication ) -{ - if( mcpsIndication->Status != LORAMAC_EVENT_INFO_STATUS_OK ) - { - return; - } - switch( mcpsIndication->McpsIndication ) - { - case MCPS_UNCONFIRMED: - { - break; - } - case MCPS_CONFIRMED: - { - break; - } - case MCPS_PROPRIETARY: - { - break; - } - case MCPS_MULTICAST: - { - break; - } - default: - break; - } - - // Check Multicast - // Check Port - // Check Datarate - // Check FramePending - // Check Buffer - // Check BufferSize - // Check Rssi - // Check Snr - // Check RxSlot - LoRaMacDownlinkStatus.Rssi = mcpsIndication->Rssi; - if( mcpsIndication->Snr & 0x80 ) // The SNR sign bit is 1 - { - // Invert and divide by 4 - LoRaMacDownlinkStatus.Snr = ( ( ~mcpsIndication->Snr + 1 ) & 0xFF ) >> 2; - LoRaMacDownlinkStatus.Snr = -LoRaMacDownlinkStatus.Snr; - } - else - { - // Divide by 4 - LoRaMacDownlinkStatus.Snr = ( mcpsIndication->Snr & 0xFF ) >> 2; - } - LoRaMacDownlinkStatus.DownlinkCounter++; - LoRaMacDownlinkStatus.RxData = mcpsIndication->RxData; - LoRaMacDownlinkStatus.Port = mcpsIndication->Port; - LoRaMacDownlinkStatus.Buffer = mcpsIndication->Buffer; - LoRaMacDownlinkStatus.BufferSize = mcpsIndication->BufferSize; - - if( ComplianceTest.Running == true ) - { - ComplianceTest.DownLinkCounter++; - } - - if( mcpsIndication->RxData == true ) - { - switch( mcpsIndication->Port ) - { - case 1: // The application LED can be controlled on port 1 or 2 - case 2: - if( mcpsIndication->BufferSize == 1 ) - { - AppLedStateOn = mcpsIndication->Buffer[0] & 0x01; - Led3StateChanged = true; - } - break; - case 224: - if( ComplianceTest.Running == false ) - { - // Check compliance test enable command (i) - if( ( mcpsIndication->BufferSize == 4 ) && - ( mcpsIndication->Buffer[0] == 0x01 ) && - ( mcpsIndication->Buffer[1] == 0x01 ) && - ( mcpsIndication->Buffer[2] == 0x01 ) && - ( mcpsIndication->Buffer[3] == 0x01 ) ) - { - IsTxConfirmed = false; - AppPort = 224; - AppDataSize = 2; - ComplianceTest.DownLinkCounter = 0; - ComplianceTest.LinkCheck = false; - ComplianceTest.DemodMargin = 0; - ComplianceTest.NbGateways = 0; - ComplianceTest.Running = true; - ComplianceTest.State = 1; - - MibRequestConfirm_t mibReq; - mibReq.Type = MIB_ADR; - mibReq.Param.AdrEnable = true; - LoRaMacMibSetRequestConfirm( &mibReq ); - -#if defined( USE_BAND_868 ) - LoRaMacTestSetDutyCycleOn( false ); -#endif - } - } - else - { - ComplianceTest.State = mcpsIndication->Buffer[0]; - switch( ComplianceTest.State ) - { - case 0: // Check compliance test disable command (ii) - IsTxConfirmed = LORAWAN_CONFIRMED_MSG_ON; - AppPort = LORAWAN_APP_PORT; - AppDataSize = LORAWAN_APP_DATA_SIZE; - ComplianceTest.DownLinkCounter = 0; - ComplianceTest.Running = false; - MibRequestConfirm_t mibReq; - mibReq.Type = MIB_ADR; - mibReq.Param.AdrEnable = LORAWAN_ADR_ON; - LoRaMacMibSetRequestConfirm( &mibReq ); -#if defined( USE_BAND_868 ) - LoRaMacTestSetDutyCycleOn( LORAWAN_DUTYCYCLE_ON ); -#endif - break; - case 1: // (iii, iv) - AppDataSize = 2; - break; - case 2: // Enable confirmed messages (v) - IsTxConfirmed = true; - ComplianceTest.State = 1; - break; - case 3: // Disable confirmed messages (vi) - IsTxConfirmed = false; - ComplianceTest.State = 1; - break; - case 4: // (vii) - AppDataSize = mcpsIndication->BufferSize; - - AppData[0] = 4; - for( uint8_t i = 1; i < AppDataSize; i++ ) - { - AppData[i] = mcpsIndication->Buffer[i] + 1; - } - break; - case 5: // (viii) - { - MlmeReq_t mlmeReq; - mlmeReq.Type = MLME_LINK_CHECK; - LoRaMacMlmeRequest( &mlmeReq ); - } - break; - case 6: // (ix) - { - MlmeReq_t mlmeReq; - - // Disable TestMode and revert back to normal operation - IsTxConfirmed = LORAWAN_CONFIRMED_MSG_ON; - AppPort = LORAWAN_APP_PORT; - AppDataSize = LORAWAN_APP_DATA_SIZE; - ComplianceTest.DownLinkCounter = 0; - ComplianceTest.Running = false; - - MibRequestConfirm_t mibReq; - mibReq.Type = MIB_ADR; - mibReq.Param.AdrEnable = LORAWAN_ADR_ON; - LoRaMacMibSetRequestConfirm( &mibReq ); -#if defined( USE_BAND_868 ) - LoRaMacTestSetDutyCycleOn( LORAWAN_DUTYCYCLE_ON ); -#endif - - mlmeReq.Type = MLME_JOIN; - - mlmeReq.Req.Join.DevEui = DevEui; - mlmeReq.Req.Join.AppEui = AppEui; - mlmeReq.Req.Join.AppKey = AppKey; - mlmeReq.Req.Join.NbTrials = 3; - - LoRaMacMlmeRequest( &mlmeReq ); - DeviceState = DEVICE_STATE_SLEEP; - } - break; - case 7: // (x) - { - if( mcpsIndication->BufferSize == 3 ) - { - MlmeReq_t mlmeReq; - mlmeReq.Type = MLME_TXCW; - mlmeReq.Req.TxCw.Timeout = ( uint16_t )( ( mcpsIndication->Buffer[1] << 8 ) | mcpsIndication->Buffer[2] ); - LoRaMacMlmeRequest( &mlmeReq ); - } - else if( mcpsIndication->BufferSize == 7 ) - { - MlmeReq_t mlmeReq; - mlmeReq.Type = MLME_TXCW_1; - mlmeReq.Req.TxCw.Timeout = ( uint16_t )( ( mcpsIndication->Buffer[1] << 8 ) | mcpsIndication->Buffer[2] ); - mlmeReq.Req.TxCw.Frequency = ( uint32_t )( ( mcpsIndication->Buffer[3] << 16 ) | ( mcpsIndication->Buffer[4] << 8 ) | mcpsIndication->Buffer[5] ) * 100; - mlmeReq.Req.TxCw.Power = mcpsIndication->Buffer[6]; - LoRaMacMlmeRequest( &mlmeReq ); - } - ComplianceTest.State = 1; - } - break; - default: - break; - } - } - break; - default: - break; - } - } - - // Switch LED 2 ON for each received downlink - Led2State = true; - Led2StateChanged = true; - TimerStart( &Led2Timer ); - DownlinkStatusUpdated = true; -} - -/*! - * \brief MLME-Confirm event function - * - * \param [IN] mlmeConfirm - Pointer to the confirm structure, - * containing confirm attributes. - */ -static void MlmeConfirm( MlmeConfirm_t *mlmeConfirm ) -{ - switch( mlmeConfirm->MlmeRequest ) - { - case MLME_JOIN: - { - if( mlmeConfirm->Status == LORAMAC_EVENT_INFO_STATUS_OK ) - { - // Status is OK, node has joined the network - IsNetworkJoinedStatusUpdate = true; - DeviceState = DEVICE_STATE_SEND; - } - else - { - // Join was not successful. Try to join again - DeviceState = DEVICE_STATE_JOIN; - } - break; - } - case MLME_LINK_CHECK: - { - if( mlmeConfirm->Status == LORAMAC_EVENT_INFO_STATUS_OK ) - { - // Check DemodMargin - // Check NbGateways - if( ComplianceTest.Running == true ) - { - ComplianceTest.LinkCheck = true; - ComplianceTest.DemodMargin = mlmeConfirm->DemodMargin; - ComplianceTest.NbGateways = mlmeConfirm->NbGateways; - } - } - break; - } - default: - break; - } - NextTx = true; - UplinkStatusUpdated = true; -} - -/** - * Main application entry point. - */ + int main( void ) { + //Initialise firmware + LoRaMacPrimitives_t LoRaMacPrimitives; LoRaMacCallback_t LoRaMacCallbacks; MibRequestConfirm_t mibReq; - BoardInit( ); - SerialDisplayInit( ); - - SerialDisplayUpdateEui( 5, DevEui ); - SerialDisplayUpdateEui( 6, AppEui ); - SerialDisplayUpdateKey( 7, AppKey ); + LoRaMacPrimitives.MacMcpsConfirm = McpsConfirm; + LoRaMacPrimitives.MacMcpsIndication = McpsIndication; +// LoRaMacPrimitives.MacMlmeConfirm = McpsConfirm; + LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks ); -#if( OVER_THE_AIR_ACTIVATION == 0 ) - SerialDisplayUpdateNwkId( LORAWAN_NETWORK_ID ); - SerialDisplayUpdateDevAddr( DevAddr ); - SerialDisplayUpdateKey( 12, NwkSKey ); - SerialDisplayUpdateKey( 13, AppSKey ); -#endif + LoRaMacChannelAdd( 3, ( ChannelParams_t ){ 867100000, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } ); + LoRaMacChannelAdd( 4, ( ChannelParams_t ){ 867300000, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 }); + LoRaMacChannelAdd( 5, ( ChannelParams_t ){ 867500000, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } ); + LoRaMacChannelAdd( 6, ( ChannelParams_t ){ 867700000, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } ); + LoRaMacChannelAdd( 7, ( ChannelParams_t ){ 867900000, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } ); + LoRaMacChannelAdd( 8, ( ChannelParams_t ){ 868800000, { ( ( DR_7 << 4 ) | DR_7 ) }, 2 } ); + LoRaMacChannelAdd( 9, ( ChannelParams_t ){ 868300000, { ( ( DR_6 << 4 ) | DR_6 ) }, 1 } ); - DeviceState = DEVICE_STATE_INIT; + //Join ABP - while( 1 ) - { - SerialRxProcess( ); - if( IsNetworkJoinedStatusUpdate == true ) - { - IsNetworkJoinedStatusUpdate = false; - mibReq.Type = MIB_NETWORK_JOINED; - LoRaMacMibGetRequestConfirm( &mibReq ); - SerialDisplayUpdateNetworkIsJoined( mibReq.Param.IsNetworkJoined ); - } - if( Led1StateChanged == true ) - { - Led1StateChanged = false; - SerialDisplayUpdateLedState( 1, Led1State ); - } - if( Led2StateChanged == true ) - { - Led2StateChanged = false; - SerialDisplayUpdateLedState( 2, Led2State ); - } - if( Led3StateChanged == true ) - { - Led3StateChanged = false; - SerialDisplayUpdateLedState( 3, AppLedStateOn ); - } - if( UplinkStatusUpdated == true ) - { - UplinkStatusUpdated = false; - SerialDisplayUpdateUplink( LoRaMacUplinkStatus.Acked, LoRaMacUplinkStatus.Datarate, LoRaMacUplinkStatus.UplinkCounter, LoRaMacUplinkStatus.Port, LoRaMacUplinkStatus.Buffer, LoRaMacUplinkStatus.BufferSize ); - } - if( DownlinkStatusUpdated == true ) - { - DownlinkStatusUpdated = false; - SerialDisplayUpdateLedState( 2, Led2State ); - SerialDisplayUpdateDownlink( LoRaMacDownlinkStatus.RxData, LoRaMacDownlinkStatus.Rssi, LoRaMacDownlinkStatus.Snr, LoRaMacDownlinkStatus.DownlinkCounter, LoRaMacDownlinkStatus.Port, LoRaMacDownlinkStatus.Buffer, LoRaMacDownlinkStatus.BufferSize ); - } - - switch( DeviceState ) - { - case DEVICE_STATE_INIT: - { - LoRaMacPrimitives.MacMcpsConfirm = McpsConfirm; - LoRaMacPrimitives.MacMcpsIndication = McpsIndication; - LoRaMacPrimitives.MacMlmeConfirm = MlmeConfirm; - LoRaMacCallbacks.GetBatteryLevel = BoardGetBatteryLevel; - LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks ); + mibReq.Type = MIB_NET_ID; + mibReq.Param.NetID = 0; + LoRaMacMibSetRequestConfirm( &mibReq ); + + mibReq.Type = MIB_DEV_ADDR; + mibReq.Param.DevAddr = LORAWAN_DEVICE_ADDRESS; + LoRaMacMibSetRequestConfirm( &mibReq ); - TimerInit( &TxNextPacketTimer, OnTxNextPacketTimerEvent ); - - TimerInit( &Led1Timer, OnLed1TimerEvent ); - TimerSetValue( &Led1Timer, 25 ); - - TimerInit( &Led2Timer, OnLed2TimerEvent ); - TimerSetValue( &Led2Timer, 25 ); - - mibReq.Type = MIB_ADR; - mibReq.Param.AdrEnable = LORAWAN_ADR_ON; - LoRaMacMibSetRequestConfirm( &mibReq ); - - mibReq.Type = MIB_PUBLIC_NETWORK; - mibReq.Param.EnablePublicNetwork = LORAWAN_PUBLIC_NETWORK; - LoRaMacMibSetRequestConfirm( &mibReq ); + mibReq.Type = MIB_NWK_SKEY; + mibReq.Param.NwkSKey = NwkSKey; + LoRaMacMibSetRequestConfirm( &mibReq ); -#if defined( USE_BAND_868 ) - LoRaMacTestSetDutyCycleOn( LORAWAN_DUTYCYCLE_ON ); - SerialDisplayUpdateDutyCycle( LORAWAN_DUTYCYCLE_ON ); - -#if( USE_SEMTECH_DEFAULT_CHANNEL_LINEUP == 1 ) - LoRaMacChannelAdd( 3, ( ChannelParams_t )LC4 ); - LoRaMacChannelAdd( 4, ( ChannelParams_t )LC5 ); - LoRaMacChannelAdd( 5, ( ChannelParams_t )LC6 ); - LoRaMacChannelAdd( 6, ( ChannelParams_t )LC7 ); - LoRaMacChannelAdd( 7, ( ChannelParams_t )LC8 ); - LoRaMacChannelAdd( 8, ( ChannelParams_t )LC9 ); - LoRaMacChannelAdd( 9, ( ChannelParams_t )LC10 ); - - mibReq.Type = MIB_RX2_DEFAULT_CHANNEL; - mibReq.Param.Rx2DefaultChannel = ( Rx2ChannelParams_t ){ 869525000, DR_3 }; - LoRaMacMibSetRequestConfirm( &mibReq ); + mibReq.Type = MIB_APP_SKEY; + mibReq.Param.AppSKey = AppSKey; + LoRaMacMibSetRequestConfirm( &mibReq ); - mibReq.Type = MIB_RX2_CHANNEL; - mibReq.Param.Rx2Channel = ( Rx2ChannelParams_t ){ 869525000, DR_3 }; - LoRaMacMibSetRequestConfirm( &mibReq ); -#endif - -#endif - SerialDisplayUpdateActivationMode( OVER_THE_AIR_ACTIVATION ); - SerialDisplayUpdateAdr( LORAWAN_ADR_ON ); - SerialDisplayUpdatePublicNetwork( LORAWAN_PUBLIC_NETWORK ); - - LoRaMacDownlinkStatus.DownlinkCounter = 0; - - DeviceState = DEVICE_STATE_JOIN; - break; - } - case DEVICE_STATE_JOIN: - { -#if( OVER_THE_AIR_ACTIVATION != 0 ) - MlmeReq_t mlmeReq; - - mlmeReq.Type = MLME_JOIN; + mibReq.Type = MIB_NETWORK_JOINED; + mibReq.Param.IsNetworkJoined = true; + LoRaMacMibSetRequestConfirm( &mibReq ); + + mibReq.Type = MIB_CHANNELS_TX_POWER; + mibReq.Param.ChannelsTxPower = LORAMAC_MAX_TX_POWER; + LoRaMacMibSetRequestConfirm( &mibReq ); + + mibReq.Type = MIB_CHANNELS_DEFAULT_TX_POWER; + mibReq.Param.ChannelsDefaultTxPower = LORAMAC_MAX_TX_POWER; + LoRaMacMibSetRequestConfirm( &mibReq ); - mlmeReq.Req.Join.DevEui = DevEui; - mlmeReq.Req.Join.AppEui = AppEui; - mlmeReq.Req.Join.AppKey = AppKey; - - if( NextTx == true ) - { - LoRaMacMlmeRequest( &mlmeReq ); - } - DeviceState = DEVICE_STATE_SLEEP; -#else - mibReq.Type = MIB_NET_ID; - mibReq.Param.NetID = LORAWAN_NETWORK_ID; - LoRaMacMibSetRequestConfirm( &mibReq ); - - mibReq.Type = MIB_DEV_ADDR; - mibReq.Param.DevAddr = DevAddr; - LoRaMacMibSetRequestConfirm( &mibReq ); - - mibReq.Type = MIB_NWK_SKEY; - mibReq.Param.NwkSKey = NwkSKey; - LoRaMacMibSetRequestConfirm( &mibReq ); - - mibReq.Type = MIB_APP_SKEY; - mibReq.Param.AppSKey = AppSKey; - LoRaMacMibSetRequestConfirm( &mibReq ); + //Prepareframe - mibReq.Type = MIB_NETWORK_JOINED; - mibReq.Param.IsNetworkJoined = true; - LoRaMacMibSetRequestConfirm( &mibReq ); - - DeviceState = DEVICE_STATE_SEND; -#endif - IsNetworkJoinedStatusUpdate = true; - break; - } - case DEVICE_STATE_SEND: - { - if( NextTx == true ) - { - SerialDisplayUpdateUplinkAcked( false ); - SerialDisplayUpdateDonwlinkRxData( false ); - PrepareTxFrame( AppPort ); + AppData[0] = 0xFF; + AppData[1] = 0xFF; + AppData[2] = 0xFF; + AppData[3] = 0xFF; + + //Sendframe + + McpsReq_t mcpsReq; + + uint8_t AppPort = 3; + mcpsReq.Type = MCPS_CONFIRMED; + mcpsReq.Req.Confirmed.fPort = AppPort; + mcpsReq.Req.Confirmed.fBuffer = AppData; + mcpsReq.Req.Confirmed.fBufferSize = APPDATA_SIZE; + mcpsReq.Req.Confirmed.Datarate = LORAWAN_DEFAULT_DATARATE; + + LoRaMacMcpsRequest( &mcpsReq ); + + while(1); +} - NextTx = SendFrame( ); - } - if( ComplianceTest.Running == true ) - { - // Schedule next packet transmission - TxDutyCycleTime = 5000; // 5000 ms - } - else - { - // Schedule next packet transmission - TxDutyCycleTime = APP_TX_DUTYCYCLE + randr( -APP_TX_DUTYCYCLE_RND, APP_TX_DUTYCYCLE_RND ); - } - DeviceState = DEVICE_STATE_CYCLE; - break; - } - case DEVICE_STATE_CYCLE: - { - DeviceState = DEVICE_STATE_SLEEP; - - // Schedule next packet transmission - TimerSetValue( &TxNextPacketTimer, TxDutyCycleTime ); - TimerStart( &TxNextPacketTimer ); - break; - } - case DEVICE_STATE_SLEEP: - { - // Wake up through events - break; - } - default: - { - DeviceState = DEVICE_STATE_INIT; - break; - } - } - } -}