not checked because compiler was down, but this should do everything!!!!

Dependencies:   FastPWM HIDScope MODSERIAL QEI biquadFilter mbed

Fork of EMG4 by Remi van Veen

diff -r 18d4cef1fdb4 -r f83354387756 main.cpp
--- a/main.cpp	Tue Sep 23 18:56:14 2014 +0000
+++ b/main.cpp	Mon Sep 21 13:48:00 2015 +0000
@@ -3,57 +3,31 @@
 #include "HIDScope.h"
 //Define objects
-AnalogIn    emg0(PTB1); //Analog input
-PwmOut      red(LED_RED); //PWM output
-Ticker log_timer;
-HIDScope scope(2);
+AnalogIn    emg(A0); //Analog input
+Ticker      sample_timer;
+HIDScope    scope(1);
-/** Looper function
-* functions used for Ticker and Timeout should be of type void <name>(void)
-* i.e. no input arguments, no output arguments.
-* if you want to change a variable that you use in other places (for example in main)
-* you will have to make that variable global in order to be able to reach it both from
-* the function called at interrupt time, and in the main function.
-* To make a variable global, define it under the includes.
-* variables that are changed in the interrupt routine (written to) should be made
-* 'volatile' to let the compiler know that those values may change outside the current context.
-* i.e.: "volatile uint16_t emg_value;" instead of "uint16_t emg_value"
-* in the example below, the variable is not re-used in the main function, and is thus declared
-* local in the looper function only.
-void looper()
+/** Sample function
+ * this function samples the emg and sends it to HIDScope
+ **/
+void sample()
-    /*variable to store value in*/    
-    uint16_t emg_value;
-    /*put raw emg value both in red and in emg_value*/
-    red.write(;      // read float value (0..1 = 0..3.3V)
-    emg_value = emg0.read_u16(); // read direct ADC result (0..4096 = 0..3.3V)
-    /*send value to PC. Line below is used to prevent buffer overrun */
-    if(pc.rxBufferGetSize(0)-pc.rxBufferGetCount() > 30)
-        pc.printf("%u\n",emg_value);
+    /* First, sample the EMG using the 'read' method of the 'AnalogIn' variable named 'emg' */
+    double emg_value =;
+    /* Second, set the sampled emg value in channel zero (the first channel) in the 'HIDScope' variable named 'scope' */
-    scope.set(1,;
+    /* Repeat the step above if required for more channels (channel 0 up to 5 = 6 channels)
+    /* Finally, send all channels to the PC at once */
-    /**When not using the LED, the above could also have been done this way:
-    * pc.printf("%u\n", emg0.read_u16());
-    */
 int main()
-    /*setup baudrate. Choose the same in your program on PC side*/
-    pc.baud(115200);
-    /*set the period for the PWM to the red LED*/
-    red.period_ms(2);
-    /**Here you attach the 'void looper(void)' function to the Ticker object
-    * The looper() function will be called every 0.01 seconds.
-    * Please mind that the parentheses after looper are omitted when using attach.
+    /**Attach the 'sample' function to the timer 'sample_timer'.
+    * this ensures that 'sample' is executed every... 0.002 seconds
-    log_timer.attach(looper, 0.005);
-    while(1) //Loop
-    {
-      /*Empty!*/
-      /*Everything is handled by the interrupt routine now!*/
-    }
+    sample_timer.attach(&sample, 0.002);
+    /*empty loop, sample() is executed periodically*/
+    while(1){}
\ No newline at end of file