File content as of revision 2:f300a1dafedc:

/* SWSPI_BI, Software SPI library
 * Copyright (c) 2012-2014, David R. Van Wagner, http://techwithdave.blogspot.com
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#ifndef SWSPI_BI_H
#define SWSPI_BI_H

#include "getVersion.h"
/** A software implemented SPI that can use any digital pins
 *
 * Useful when don't want to share a single SPI hardware among attached devices
 * or when pinout doesn't match exactly to the target's SPI pins
 *
 * @code
 * #include "mbed.h"
 * #include "SWSPI_BI.h"
 * 
 * SWSPI_BI spi(p5, p6, p7); // mosio, dir  , sclk
 * 
 * int main() 
 * {
 *     DigitalOut cs(p8);
 *     spi.format(8, 0);
 *     spi.frequency(10000000);
 *     cs.write(0);
 *     spi.write(0x9f);
 *     int jedecid = (spi.write(0) << 16) | (spi.write(0) << 8) | spi.write(0);
 *     cs.write(1);
 * }
 * @endcode
 */

#define SWSPI_BI_HDR_VER  "1.50"

 
class SWSPI_BI: public getVersion
{
private:
    DigitalInOut* msio;
    DigitalOut* ldir;
    DigitalOut* rdir;
    DigitalOut* sclk;
    int port;
    int bits;
    int mode;
    int polarity; // idle clock value
    int phase; // 0=sample on leading (first) clock edge, 1=trailing (second)
    int freq;
    
public:
    /** Create SWSPI_BI object
     *
     *  @param mosi_pin
     *  @param miso_pin
     *  @param sclk_pin
     */
    SWSPI_BI(DigitalInOut *msio_pin, DigitalOut *rdir_pin,DigitalOut *ldir_pin, DigitalOut *sclk_pin);
    
    /** Destructor */
    ~SWSPI_BI();
    
    /** Specify SPI format
     *
     *  @param bits  8 or 16 are typical values
     *  @param mode  0, 1, 2, or 3 phase (bit1) and idle clock (bit0)
     */
    void format(int bits, int mode = 0);
    
    /** Specify SPI clock frequency
     *
     *  @param hz  frequency (optional, defaults to 10000000)
     */
    void frequency(int hz = 10000000);
    
    /** Write data and read result
     *
     *  @param value  data to write (see format for bit size) 
     *  @param  DigitalOut  cs line
     *  @param  lastdata this is the last data of a sequence, sets the cs high at the end 
     *  @param  nxtrd : next cycle will be a read, set the LVDS interface to master in ( ADC out)     
     */
    void  write(unsigned int value, DigitalOut * cs, bool lastdata, int cs_pol=0 ,bool nxtrd=false);
    unsigned int read( DigitalOut * cs, bool lastdata, int cs_pol=0 );
};

#endif // SWSPI_BI_H