Diff: hal/spi_api.h

Revision:

525:c320967f86b9

Parent:

13:0645d8841f51

Child:

563:536c9fb088a0

--- a/hal/spi_api.h	Mon Apr 27 09:45:08 2015 +0100
+++ b/hal/spi_api.h	Tue Apr 28 11:45:12 2015 +0100
@@ -17,29 +17,197 @@
 #define MBED_SPI_API_H
 
 #include "device.h"
+#include "dma_api.h"
+#include "buffer.h"
 
 #if DEVICE_SPI
 
+#define SPI_EVENT_ERROR       (1 << 1)
+#define SPI_EVENT_COMPLETE    (1 << 2)
+#define SPI_EVENT_RX_OVERFLOW (1 << 3)
+#define SPI_EVENT_ALL         (SPI_EVENT_ERROR | SPI_EVENT_COMPLETE | SPI_EVENT_RX_OVERFLOW)
+
+#define SPI_EVENT_INTERNAL_TRANSFER_COMPLETE (1 << 30) // internal flag to report an event occurred
+
+#define SPI_FILL_WORD         (0xFFFF)
+
+#if DEVICE_SPI_ASYNCH
+/** Asynch spi hal structure
+ */
+typedef struct {
+    struct spi_s spi;        /**< Target specific spi structure */
+    struct buffer_s tx_buff; /**< Tx buffer */
+    struct buffer_s rx_buff; /**< Rx buffer */
+} spi_t;
+
+#else
+/** Non-asynch spi hal structure
+ */
+typedef struct spi_s spi_t;
+
+#endif
+
 #ifdef __cplusplus
 extern "C" {
 #endif
 
-typedef struct spi_s spi_t;
+/**
+ * \defgroup GeneralSPI SPI Configuration Functions
+ * @{
+ */
+
+/** Initialize the SPI peripheral
+ *
+ * Configures the pins used by SPI, sets a default format and frequency, and enables the peripheral
+ * @param[out] obj  The SPI object to initialize
+ * @param[in]  mosi The pin to use for MOSI
+ * @param[in]  miso The pin to use for MISO
+ * @param[in]  sclk The pin to use for SCLK
+ * @param[in]  ssel The pin to use for SSEL
+ */
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel);
+
+/** Release a SPI object
+ *
+ * TODO: spi_free is currently unimplemented
+ * This will require reference counting at the C++ level to be safe
+ *
+ * Return the pins owned by the SPI object to their reset state
+ * Disable the SPI peripheral
+ * Disable the SPI clock
+ * @param[in] obj The SPI object to deinitialize
+ */
+void spi_free(spi_t *obj);
+
+/** Configure the SPI format
+ *
+ * Set the number of bits per frame, configure clock polarity and phase, shift order and master/slave mode
+ * @param[in,out] obj   The SPI object to configure
+ * @param[in]     bits  The number of bits per frame
+ * @param[in]     mode  The SPI mode (clock polarity, phase, and shift direction)
+ * @param[in]     slave Zero for master mode or non-zero for slave mode
+ */
+void spi_format(spi_t *obj, int bits, int mode, int slave);
+
+/** Set the SPI baud rate
+ *
+ * Actual frequency may differ from the desired frequency due to available dividers and bus clock
+ * Configures the SPI peripheral's baud rate
+ * @param[in,out] obj The SPI object to configure
+ * @param[in]     hz  The baud rate in Hz
+ */
+void spi_frequency(spi_t *obj, int hz);
+
+/**@}*/
+/**
+ * \defgroup SynchSPI Synchronous SPI Hardware Abstraction Layer
+ * @{
+ */
+
+/** Write a byte out in master mode and receive a value
+ *
+ * @param[in] obj   The SPI peripheral to use for sending
+ * @param[in] value The value to send
+ * @return Returns the value received during send
+ */
+int  spi_master_write(spi_t *obj, int value);
+
+/** Check if a value is available to read
+ *
+ * @param[in] obj The SPI peripheral to check
+ * @return non-zero if a value is available
+ */
+int  spi_slave_receive(spi_t *obj);
+
+/** Get a received value out of the SPI receive buffer in slave mode
+ *
+ * Blocks until a value is available
+ * @param[in] obj The SPI peripheral to read
+ * @return The value received
+ */
+int  spi_slave_read(spi_t *obj);
 
-void spi_init         (spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel);
-void spi_free         (spi_t *obj);
-void spi_format       (spi_t *obj, int bits, int mode, int slave);
-void spi_frequency    (spi_t *obj, int hz);
-int  spi_master_write (spi_t *obj, int value);
-int  spi_slave_receive(spi_t *obj);
-int  spi_slave_read   (spi_t *obj);
-void spi_slave_write  (spi_t *obj, int value);
-int  spi_busy         (spi_t *obj);
+/** Write a value to the SPI peripheral in slave mode
+ *
+ * Blocks until the SPI peripheral can be written to
+ * @param[in] obj   The SPI peripheral to write
+ * @param[in] value The value to write
+ */
+void spi_slave_write(spi_t *obj, int value);
+
+/** Checks if the specified SPI peripheral is in use
+ *
+ * @param[in] obj The SPI peripheral to check
+ * @return non-zero if the peripheral is currently transmitting
+ */
+int  spi_busy(spi_t *obj);
+
+/** Get the module number
+ *
+ * @param[in] obj The SPI peripheral to check
+ * @return The module number
+ */
+uint8_t spi_get_module(spi_t *obj);
+
+/**@}*/
+
+#if DEVICE_SPI_ASYNCH
+/**
+ * \defgroup AsynchSPI Asynchronous SPI Hardware Abstraction Layer
+ * @{
+ */
+
+/** Begin the SPI transfer. Buffer pointers and lengths are specified in tx_buff and rx_buff
+ *
+ * @param[in] obj       The SPI object which holds the transfer information
+ * @param[in] tx        The buffer to send
+ * @param[in] tx_length The number of words to transmit
+ * @param[in] rx        The buffer to receive
+ * @param[in] rx_length The number of words to receive
+ * @param[in] bit_width The bit width of buffer words
+ * @param[in] event     The logical OR of events to be registered
+ * @param[in] handler   SPI interrupt handler
+ * @param[in] hint      A suggestion for how to use DMA with this transfer
+ */
+void spi_master_transfer(spi_t *obj, void *tx, size_t tx_length, void *rx, size_t rx_length, uint8_t bit_width, uint32_t handler, uint32_t event, DMAUsage hint);
+
+/** The asynchronous IRQ handler
+ *
+ * Reads the received values out of the RX FIFO, writes values into the TX FIFO and checks for transfer termination
+ * conditions, such as buffer overflows or transfer complete.
+ * @param[in] obj     The SPI object which holds the transfer information
+ * @return event flags if a transfer termination condition was met or 0 otherwise.
+ */
+uint32_t spi_irq_handler_asynch(spi_t *obj);
+
+/** Attempts to determine if the SPI peripheral is already in use.
+ *
+ * If a temporary DMA channel has been allocated, peripheral is in use.
+ * If a permanent DMA channel has been allocated, check if the DMA channel is in use.  If not, proceed as though no DMA
+ * channel were allocated.
+ * If no DMA channel is allocated, check whether tx and rx buffers have been assigned.  For each assigned buffer, check
+ * if the corresponding buffer position is less than the buffer length.  If buffers do not indicate activity, check if
+ * there are any bytes in the FIFOs.
+ * @param[in] obj The SPI object to check for activity
+ * @return non-zero if the SPI port is active or zero if it is not.
+ */
+uint8_t spi_active(spi_t *obj);
+
+/** Abort an SPI transfer
+ *
+ * @param obj The SPI peripheral to stop
+ */
+void spi_abort_asynch(spi_t *obj);
+
+
+#endif
+
+/**@}*/
 
 #ifdef __cplusplus
 }
-#endif
+#endif // __cplusplus
 
-#endif
+#endif // SPI_DEVICE
 
-#endif
+#endif // MBED_SPI_API_H