不韋 呂 / F746_Spectrogram

Realtime spectrogram for DISCO-F746NG. On-board MEMS microphone is used for input sound signal. リアルタイムスペクトログラム．入力：MEMSマイク

Dependencies:   F746_GUI F746_SAI_IO UIT_FFT_Real

mbed_src_STM32F7/api/I2C.h@6:b3885567877c, 2017-04-10 (annotated)

Committer:
MikamiUitOpen
Date:
Mon Apr 10 13:43:07 2017 +0000
Revision:
6:b3885567877c
Parent:
4:c1beacfc42c7 
7

Who changed what in which revision?

UserRevisionLine numberNew contents of line
MikamiUitOpen 4:c1beacfc42c7 1 /* mbed Microcontroller Library
MikamiUitOpen 4:c1beacfc42c7 2 * Copyright (c) 2006-2015 ARM Limited
MikamiUitOpen 4:c1beacfc42c7 3 *
MikamiUitOpen 4:c1beacfc42c7 4 * Licensed under the Apache License, Version 2.0 (the "License");
MikamiUitOpen 4:c1beacfc42c7 5 * you may not use this file except in compliance with the License.
MikamiUitOpen 4:c1beacfc42c7 6 * You may obtain a copy of the License at
MikamiUitOpen 4:c1beacfc42c7 7 *
MikamiUitOpen 4:c1beacfc42c7 8 * http://www.apache.org/licenses/LICENSE-2.0
MikamiUitOpen 4:c1beacfc42c7 9 *
MikamiUitOpen 4:c1beacfc42c7 10 * Unless required by applicable law or agreed to in writing, software
MikamiUitOpen 4:c1beacfc42c7 11 * distributed under the License is distributed on an "AS IS" BASIS,
MikamiUitOpen 4:c1beacfc42c7 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
MikamiUitOpen 4:c1beacfc42c7 13 * See the License for the specific language governing permissions and
MikamiUitOpen 4:c1beacfc42c7 14 * limitations under the License.
MikamiUitOpen 4:c1beacfc42c7 15 */
MikamiUitOpen 4:c1beacfc42c7 16 #ifndef MBED_I2C_H
MikamiUitOpen 4:c1beacfc42c7 17 #define MBED_I2C_H
MikamiUitOpen 4:c1beacfc42c7 18
MikamiUitOpen 4:c1beacfc42c7 19 #include "platform.h"
MikamiUitOpen 4:c1beacfc42c7 20
MikamiUitOpen 4:c1beacfc42c7 21 #if DEVICE_I2C
MikamiUitOpen 4:c1beacfc42c7 22
MikamiUitOpen 4:c1beacfc42c7 23 #include "i2c_api.h"
MikamiUitOpen 4:c1beacfc42c7 24
MikamiUitOpen 4:c1beacfc42c7 25 #if DEVICE_I2C_ASYNCH
MikamiUitOpen 4:c1beacfc42c7 26 #include "CThunk.h"
MikamiUitOpen 4:c1beacfc42c7 27 #include "dma_api.h"
MikamiUitOpen 4:c1beacfc42c7 28 #include "FunctionPointer.h"
MikamiUitOpen 4:c1beacfc42c7 29 #endif
MikamiUitOpen 4:c1beacfc42c7 30
MikamiUitOpen 4:c1beacfc42c7 31 namespace mbed {
MikamiUitOpen 4:c1beacfc42c7 32
MikamiUitOpen 4:c1beacfc42c7 33 /** An I2C Master, used for communicating with I2C slave devices
MikamiUitOpen 4:c1beacfc42c7 34 *
MikamiUitOpen 4:c1beacfc42c7 35 * Example:
MikamiUitOpen 4:c1beacfc42c7 36 * @code
MikamiUitOpen 4:c1beacfc42c7 37 * // Read from I2C slave at address 0x62
MikamiUitOpen 4:c1beacfc42c7 38 *
MikamiUitOpen 4:c1beacfc42c7 39 * #include "mbed.h"
MikamiUitOpen 4:c1beacfc42c7 40 *
MikamiUitOpen 4:c1beacfc42c7 41 * I2C i2c(p28, p27);
MikamiUitOpen 4:c1beacfc42c7 42 *
MikamiUitOpen 4:c1beacfc42c7 43 * int main() {
MikamiUitOpen 4:c1beacfc42c7 44 * int address = 0x62;
MikamiUitOpen 4:c1beacfc42c7 45 * char data[2];
MikamiUitOpen 4:c1beacfc42c7 46 * i2c.read(address, data, 2);
MikamiUitOpen 4:c1beacfc42c7 47 * }
MikamiUitOpen 4:c1beacfc42c7 48 * @endcode
MikamiUitOpen 4:c1beacfc42c7 49 */
MikamiUitOpen 4:c1beacfc42c7 50 class I2C {
MikamiUitOpen 4:c1beacfc42c7 51
MikamiUitOpen 4:c1beacfc42c7 52 public:
MikamiUitOpen 4:c1beacfc42c7 53 enum RxStatus {
MikamiUitOpen 4:c1beacfc42c7 54 NoData,
MikamiUitOpen 4:c1beacfc42c7 55 MasterGeneralCall,
MikamiUitOpen 4:c1beacfc42c7 56 MasterWrite,
MikamiUitOpen 4:c1beacfc42c7 57 MasterRead
MikamiUitOpen 4:c1beacfc42c7 58 };
MikamiUitOpen 4:c1beacfc42c7 59
MikamiUitOpen 4:c1beacfc42c7 60 enum Acknowledge {
MikamiUitOpen 4:c1beacfc42c7 61 NoACK = 0,
MikamiUitOpen 4:c1beacfc42c7 62 ACK = 1
MikamiUitOpen 4:c1beacfc42c7 63 };
MikamiUitOpen 4:c1beacfc42c7 64
MikamiUitOpen 4:c1beacfc42c7 65 /** Create an I2C Master interface, connected to the specified pins
MikamiUitOpen 4:c1beacfc42c7 66 *
MikamiUitOpen 4:c1beacfc42c7 67 * @param sda I2C data line pin
MikamiUitOpen 4:c1beacfc42c7 68 * @param scl I2C clock line pin
MikamiUitOpen 4:c1beacfc42c7 69 */
MikamiUitOpen 4:c1beacfc42c7 70 I2C(PinName sda, PinName scl);
MikamiUitOpen 4:c1beacfc42c7 71
MikamiUitOpen 4:c1beacfc42c7 72 /** Set the frequency of the I2C interface
MikamiUitOpen 4:c1beacfc42c7 73 *
MikamiUitOpen 4:c1beacfc42c7 74 * @param hz The bus frequency in hertz
MikamiUitOpen 4:c1beacfc42c7 75 */
MikamiUitOpen 4:c1beacfc42c7 76 void frequency(int hz);
MikamiUitOpen 4:c1beacfc42c7 77
MikamiUitOpen 4:c1beacfc42c7 78 /** Read from an I2C slave
MikamiUitOpen 4:c1beacfc42c7 79 *
MikamiUitOpen 4:c1beacfc42c7 80 * Performs a complete read transaction. The bottom bit of
MikamiUitOpen 4:c1beacfc42c7 81 * the address is forced to 1 to indicate a read.
MikamiUitOpen 4:c1beacfc42c7 82 *
MikamiUitOpen 4:c1beacfc42c7 83 * @param address 8-bit I2C slave address [ addr | 1 ]
MikamiUitOpen 4:c1beacfc42c7 84 * @param data Pointer to the byte-array to read data in to
MikamiUitOpen 4:c1beacfc42c7 85 * @param length Number of bytes to read
MikamiUitOpen 4:c1beacfc42c7 86 * @param repeated Repeated start, true - don't send stop at end
MikamiUitOpen 4:c1beacfc42c7 87 *
MikamiUitOpen 4:c1beacfc42c7 88 * @returns
MikamiUitOpen 4:c1beacfc42c7 89 * 0 on success (ack),
MikamiUitOpen 4:c1beacfc42c7 90 * non-0 on failure (nack)
MikamiUitOpen 4:c1beacfc42c7 91 */
MikamiUitOpen 4:c1beacfc42c7 92 int read(int address, char *data, int length, bool repeated = false);
MikamiUitOpen 4:c1beacfc42c7 93
MikamiUitOpen 4:c1beacfc42c7 94 /** Read a single byte from the I2C bus
MikamiUitOpen 4:c1beacfc42c7 95 *
MikamiUitOpen 4:c1beacfc42c7 96 * @param ack indicates if the byte is to be acknowledged (1 = acknowledge)
MikamiUitOpen 4:c1beacfc42c7 97 *
MikamiUitOpen 4:c1beacfc42c7 98 * @returns
MikamiUitOpen 4:c1beacfc42c7 99 * the byte read
MikamiUitOpen 4:c1beacfc42c7 100 */
MikamiUitOpen 4:c1beacfc42c7 101 int read(int ack);
MikamiUitOpen 4:c1beacfc42c7 102
MikamiUitOpen 4:c1beacfc42c7 103 /** Write to an I2C slave
MikamiUitOpen 4:c1beacfc42c7 104 *
MikamiUitOpen 4:c1beacfc42c7 105 * Performs a complete write transaction. The bottom bit of
MikamiUitOpen 4:c1beacfc42c7 106 * the address is forced to 0 to indicate a write.
MikamiUitOpen 4:c1beacfc42c7 107 *
MikamiUitOpen 4:c1beacfc42c7 108 * @param address 8-bit I2C slave address [ addr | 0 ]
MikamiUitOpen 4:c1beacfc42c7 109 * @param data Pointer to the byte-array data to send
MikamiUitOpen 4:c1beacfc42c7 110 * @param length Number of bytes to send
MikamiUitOpen 4:c1beacfc42c7 111 * @param repeated Repeated start, true - do not send stop at end
MikamiUitOpen 4:c1beacfc42c7 112 *
MikamiUitOpen 4:c1beacfc42c7 113 * @returns
MikamiUitOpen 4:c1beacfc42c7 114 * 0 on success (ack),
MikamiUitOpen 4:c1beacfc42c7 115 * non-0 on failure (nack)
MikamiUitOpen 4:c1beacfc42c7 116 */
MikamiUitOpen 4:c1beacfc42c7 117 int write(int address, const char *data, int length, bool repeated = false);
MikamiUitOpen 4:c1beacfc42c7 118
MikamiUitOpen 4:c1beacfc42c7 119 /** Write single byte out on the I2C bus
MikamiUitOpen 4:c1beacfc42c7 120 *
MikamiUitOpen 4:c1beacfc42c7 121 * @param data data to write out on bus
MikamiUitOpen 4:c1beacfc42c7 122 *
MikamiUitOpen 4:c1beacfc42c7 123 * @returns
MikamiUitOpen 4:c1beacfc42c7 124 * '1' if an ACK was received,
MikamiUitOpen 4:c1beacfc42c7 125 * '0' otherwise
MikamiUitOpen 4:c1beacfc42c7 126 */
MikamiUitOpen 4:c1beacfc42c7 127 int write(int data);
MikamiUitOpen 4:c1beacfc42c7 128
MikamiUitOpen 4:c1beacfc42c7 129 /** Creates a start condition on the I2C bus
MikamiUitOpen 4:c1beacfc42c7 130 */
MikamiUitOpen 4:c1beacfc42c7 131
MikamiUitOpen 4:c1beacfc42c7 132 void start(void);
MikamiUitOpen 4:c1beacfc42c7 133
MikamiUitOpen 4:c1beacfc42c7 134 /** Creates a stop condition on the I2C bus
MikamiUitOpen 4:c1beacfc42c7 135 */
MikamiUitOpen 4:c1beacfc42c7 136 void stop(void);
MikamiUitOpen 4:c1beacfc42c7 137
MikamiUitOpen 4:c1beacfc42c7 138 #if DEVICE_I2C_ASYNCH
MikamiUitOpen 4:c1beacfc42c7 139
MikamiUitOpen 4:c1beacfc42c7 140 /** Start non-blocking I2C transfer.
MikamiUitOpen 4:c1beacfc42c7 141 *
MikamiUitOpen 4:c1beacfc42c7 142 * @param address 8/10 bit I2c slave address
MikamiUitOpen 4:c1beacfc42c7 143 * @param tx_buffer The TX buffer with data to be transfered
MikamiUitOpen 4:c1beacfc42c7 144 * @param tx_length The length of TX buffer in bytes
MikamiUitOpen 4:c1beacfc42c7 145 * @param rx_buffer The RX buffer which is used for received data
MikamiUitOpen 4:c1beacfc42c7 146 * @param rx_length The length of RX buffer in bytes
MikamiUitOpen 4:c1beacfc42c7 147 * @param event The logical OR of events to modify
MikamiUitOpen 4:c1beacfc42c7 148 * @param callback The event callback function
MikamiUitOpen 4:c1beacfc42c7 149 * @param repeated Repeated start, true - do not send stop at end
MikamiUitOpen 4:c1beacfc42c7 150 * @return Zero if the transfer has started, or -1 if I2C peripheral is busy
MikamiUitOpen 4:c1beacfc42c7 151 */
MikamiUitOpen 4:c1beacfc42c7 152 int transfer(int address, const char *tx_buffer, int tx_length, char *rx_buffer, int rx_length, const event_callback_t& callback, int event = I2C_EVENT_TRANSFER_COMPLETE, bool repeated = false);
MikamiUitOpen 4:c1beacfc42c7 153
MikamiUitOpen 4:c1beacfc42c7 154 /** Abort the on-going I2C transfer
MikamiUitOpen 4:c1beacfc42c7 155 */
MikamiUitOpen 4:c1beacfc42c7 156 void abort_transfer();
MikamiUitOpen 4:c1beacfc42c7 157 protected:
MikamiUitOpen 4:c1beacfc42c7 158 void irq_handler_asynch(void);
MikamiUitOpen 4:c1beacfc42c7 159 event_callback_t _callback;
MikamiUitOpen 4:c1beacfc42c7 160 CThunk<I2C> _irq;
MikamiUitOpen 4:c1beacfc42c7 161 DMAUsage _usage;
MikamiUitOpen 4:c1beacfc42c7 162 #endif
MikamiUitOpen 4:c1beacfc42c7 163
MikamiUitOpen 4:c1beacfc42c7 164 protected:
MikamiUitOpen 4:c1beacfc42c7 165 void aquire();
MikamiUitOpen 4:c1beacfc42c7 166
MikamiUitOpen 4:c1beacfc42c7 167 i2c_t _i2c;
MikamiUitOpen 4:c1beacfc42c7 168 static I2C *_owner;
MikamiUitOpen 4:c1beacfc42c7 169 int _hz;
MikamiUitOpen 4:c1beacfc42c7 170 };
MikamiUitOpen 4:c1beacfc42c7 171
MikamiUitOpen 4:c1beacfc42c7 172 } // namespace mbed
MikamiUitOpen 4:c1beacfc42c7 173
MikamiUitOpen 4:c1beacfc42c7 174 #endif
MikamiUitOpen 4:c1beacfc42c7 175
MikamiUitOpen 4:c1beacfc42c7 176 #endif