Victor Tolosana
ok
Diff: GSM.h
- Revision:
- 10:24671d8aa0c9
- Parent:
- 9:2f5445178940
- Child:
- 11:c93524a12e92
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/GSM.h Tue May 13 14:43:57 2014 +0000
@@ -0,0 +1,221 @@
+/*
+ GSM.h
+ 2013 Copyright (c) Seeed Technology Inc. All right reserved.
+
+ Author:lawliet.zou@gmail.com
+ 2013-11-14
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef __GSM_H__
+#define __GSM_H__
+
+#include <stdio.h>
+#include "mbed.h"
+
+#define DEFAULT_TIMEOUT 5
+#define SMS_MAX_LENGTH 16
+
+
+enum GSM_MESSAGE {
+ MESSAGE_RING = 0,
+ MESSAGE_SMS = 1,
+ MESSAGE_ERROR
+};
+
+
+/** GSM class.
+ * Used for mobile communication. attention that GSM module communicate with MCU in serial protocol
+ */
+class GSM
+{
+public:
+ /** Create GSM instance
+ * @param tx uart transmit pin to communicate with GSM module
+ * @param rx uart receive pin to communicate with GSM module
+ * @param baudRate baud rate of uart communication
+ * @param number default phone number during mobile communication
+ */
+ GSM(PinName tx, PinName rx, int baudRate,char *number) : gprsSerial(tx, rx) {
+ //gprsSerial.baud(baudRate);
+ phoneNumber = number;
+ };
+
+ int powerCheck(void);
+ /** init GSM module including SIM card check & signal strength & network check
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int init(void);
+
+ /** Check SIM card' Status
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int checkSIMStatus(void);
+
+ /** Check signal strength
+ * @returns
+ * signal strength in number(ex 3,4,5,6,7,8...) on success,
+ * -1 on error
+ */
+ int checkSignalStrength(void);
+
+ /** Set SMS format and processing mode
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int settingSMS(void);
+
+ /** Send text SMS
+ * @param *number phone number which SMS will be send to
+ * @param *data message that will be send to
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int sendSMS(char *number, char *data);
+
+ /** Read SMS by index
+ * @param *message buffer used to get SMS message
+ * @param index which SMS message to read
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int readSMS(char *message, int index);
+
+ /** Delete SMS message on SIM card
+ * @param *index the index number which SMS message will be delete
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int deleteSMS(int index);
+
+ /** Read SMS when coming a message,it will be store in messageBuffer.
+ * @param message buffer used to get SMS message
+ */
+ int getSMS(char* message);
+
+ /** Call someone
+ * @param *number the phone number which you want to call
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int callUp(char *number);
+
+ /** Auto answer if coming a call
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int answer(void);
+
+ /** A loop to wait for some event. if a call comes in, it will auto answer it and if a SMS message comes in, it will read the message
+ * @param *check whether to check phone number when get event
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int loopHandle(void);
+
+ /** GSM network init
+ * @param *apn Access Point Name to connect network
+ * @param *userName general is empty
+ * @param *passWord general is empty
+ */
+
+ int networkInit(char* apn, char* userName = NULL, char* passWord = NULL);
+ /** Build TCP connect
+ * @param *ip ip address which will connect to
+ * @param *port TCP server' port number
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int connectTCP(char *ip, char *port);
+
+ /** Send data to TCP server
+ * @param *data data that will be send to TCP server
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int sendTCPData(char *data);
+
+ /** Close TCP connection
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int closeTCP(void);
+
+ /** Close TCP service
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int shutTCP(void);
+
+ Serial gprsSerial;
+ //USBSerial pc;
+
+private:
+ /** Read from GSM module and save to buffer array
+ * @param *buffer buffer array to save what read from GSM module
+ * @param *count the maximal bytes number read from GSM module
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int readBuffer(char *buffer,int count);
+
+ /** Send AT command to GSM module
+ * @param *cmd command array which will be send to GSM module
+ */
+ void sendCmd(char *cmd);
+
+ /** Check GSM module response before timeout
+ * @param *resp correct response which GSM module will return
+ * @param *timeout waiting seconds till timeout
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int waitForResp(char *resp, int timeout);
+
+ /** Send AT command to GSM module and wait for correct response
+ * @param *cmd AT command which will be send to GSM module
+ * @param *resp correct response which GSM module will return
+ * @param *timeout waiting seconds till timeout
+ * @returns
+ * 0 on success,
+ * -1 on error
+ */
+ int sendCmdAndWaitForResp(char *cmd, char *resp, int timeout);
+
+ Timer timeCnt;
+ char *phoneNumber;
+ char messageBuffer[SMS_MAX_LENGTH];
+};
+
+#endif
+