Diff: mbed-cloud-client/mbed-client/mbed-client/m2mconfig.h

Revision:

0:276e7a263c35

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-cloud-client/mbed-client/mbed-client/m2mconfig.h	Mon Jul 02 06:30:39 2018 +0000
@@ -0,0 +1,213 @@
+/*
+ * Copyright (c) 2015 ARM Limited. All rights reserved.
+ * SPDX-License-Identifier: Apache-2.0
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef M2MCONFIG_H
+#define M2MCONFIG_H
+
+/*! \file m2mconfig.h
+* \brief File defining all system build time configuration used by mbed-client.
+*/
+
+#include "mbed-client/m2mstring.h"
+
+#include <stddef.h>
+
+using namespace m2m;
+
+/**
+ * \def MBED_CLIENT_RECONNECTION_COUNT
+ *
+ * \brief Sets Reconnection count for mbed Client
+ * to attempt a reconnection re-tries until
+ * reaches the defined value either by the application
+ * or the default value set in Client.
+ * By default, the value is 3.
+ */
+#undef MBED_CLIENT_RECONNECTION_COUNT  /* 3 */
+
+/**
+ * \def MBED_CLIENT_RECONNECTION_INTERVAL
+ *
+ * \brief Sets Reconnection interval (in seconds) for
+ * mbed Client to attempt a reconnection re-tries.
+ * By default, the value is 5 seconds.
+ */
+#undef MBED_CLIENT_RECONNECTION_INTERVAL  /* 5 */
+
+/**
+ * \def MBED_CLIENT_TCP_KEEPALIVE_TIME
+ *
+ * \brief Keep alive time (in seconds) to send pings
+ * in case mbed Client is connected through TCP.
+ * By default, the value is 600 seconds.
+ */
+#undef MBED_CLIENT_TCP_KEEPALIVE_TIME   /* 600 */
+
+/**
+ * \def MBED_CLIENT_TCP_KEEPALIVE_INTERVAL
+ *
+ * \brief The number of seconds between TCP keep-alive probes.
+ * By default, the value is 75 seconds.
+ */
+#undef MBED_CLIENT_TCP_KEEPALIVE_INTERVAL   /* 75 */
+
+/**
+ * \def MBED_CLIENT_EVENT_LOOP_SIZE
+ *
+ * \brief Defines the size of memory allocated for
+ * event loop (in bytes) for timer and network event
+ * handling of mbed Client.
+ * By default, this value is 1024 bytes.This memory is
+ * allocated from heap
+ */
+#undef MBED_CLIENT_EVENT_LOOP_SIZE      /* 1024 */
+
+#ifdef YOTTA_CFG_RECONNECTION_COUNT
+#define MBED_CLIENT_RECONNECTION_COUNT YOTTA_CFG_RECONNECTION_COUNT
+#elif defined MBED_CONF_MBED_CLIENT_RECONNECTION_COUNT
+#define MBED_CLIENT_RECONNECTION_COUNT MBED_CONF_MBED_CLIENT_RECONNECTION_COUNT
+#endif
+
+#ifdef YOTTA_CFG_RECONNECTION_INTERVAL
+#define MBED_CLIENT_RECONNECTION_INTERVAL YOTTA_CFG_RECONNECTION_INTERVAL
+#elif defined MBED_CONF_MBED_CLIENT_RECONNECTION_INTERVAL
+#define MBED_CLIENT_RECONNECTION_INTERVAL MBED_CONF_MBED_CLIENT_RECONNECTION_INTERVAL
+#endif
+
+#ifdef YOTTA_CFG_TCP_KEEPALIVE_TIME
+#define MBED_CLIENT_TCP_KEEPALIVE_TIME YOTTA_CFG_TCP_KEEPALIVE_TIME
+#elif defined MBED_CONF_MBED_CLIENT_TCP_KEEPALIVE_TIME
+#define MBED_CLIENT_TCP_KEEPALIVE_TIME MBED_CONF_MBED_CLIENT_TCP_KEEPALIVE_TIME
+#endif
+
+#ifdef YOTTA_CFG_TCP_KEEPALIVE_INTERVAL
+#define MBED_CLIENT_TCP_KEEPALIVE_INTERVAL YOTTA_CFG_TCP_KEEPALIVE_INTERVAL
+#elif defined MBED_CONF_MBED_CLIENT_TCP_KEEPALIVE_INTERVAL
+#define MBED_CLIENT_TCP_KEEPALIVE_INTERVAL MBED_CONF_MBED_CLIENT_TCP_KEEPALIVE_INTERVAL
+#endif
+
+#ifdef YOTTA_CFG_DISABLE_BOOTSTRAP_FEATURE
+#define MBED_CLIENT_DISABLE_BOOTSTRAP_FEATURE YOTTA_CFG_DISABLE_BOOTSTRAP_FEATURE
+#elif defined MBED_CONF_MBED_CLIENT_DISABLE_BOOTSTRAP_FEATURE
+#define MBED_CLIENT_DISABLE_BOOTSTRAP_FEATURE MBED_CONF_MBED_CLIENT_DISABLE_BOOTSTRAP_FEATURE
+#endif
+
+#ifdef YOTTA_CFG_COAP_MAX_INCOMING_BLOCK_MESSAGE_SIZE
+#define SN_COAP_MAX_INCOMING_MESSAGE_SIZE YOTTA_CFG_COAP_MAX_INCOMING_BLOCK_MESSAGE_SIZE
+#elif defined MBED_CONF_MBED_CLIENT_SN_COAP_MAX_INCOMING_MESSAGE_SIZE
+#define SN_COAP_MAX_INCOMING_MESSAGE_SIZE MBED_CONF_MBED_CLIENT_SN_COAP_MAX_INCOMING_MESSAGE_SIZE
+#endif
+
+#ifdef MBED_CONF_MBED_CLIENT_EVENT_LOOP_SIZE
+#define MBED_CLIENT_EVENT_LOOP_SIZE MBED_CONF_MBED_CLIENT_EVENT_LOOP_SIZE
+#endif
+
+#ifdef YOTTA_CFG_DISABLE_INTERFACE_DESCRIPTION
+#define DISABLE_INTERFACE_DESCRIPTION YOTTA_CFG_DISABLE_INTERFACE_DESCRIPTION
+#elif defined MBED_CONF_MBED_CLIENT_DISABLE_INTERFACE_DESCRIPTION
+#define DISABLE_INTERFACE_DESCRIPTION MBED_CONF_MBED_CLIENT_DISABLE_INTERFACE_DESCRIPTION
+#endif
+
+#ifdef YOTTA_CFG_DISABLE_RESOURCE_TYPE
+#define DISABLE_RESOURCE_TYPE YOTTA_CFG_DISABLE_RESOURCE_TYPE
+#elif defined MBED_CONF_MBED_CLIENT_DISABLE_RESOURCE_TYPE
+#define DISABLE_RESOURCE_TYPE MBED_CONF_MBED_CLIENT_DISABLE_RESOURCE_TYPE
+#endif
+
+#ifdef YOTTA_CFG_DISABLE_DELAYED_RESPONSE
+#define DISABLE_DELAYED_RESPONSE YOTTA_CFG_DISABLE_DELAYED_RESPONSE
+#elif defined MBED_CONF_MBED_CLIENT_DISABLE_DELAYED_RESPONSE
+#define DISABLE_DELAYED_RESPONSE MBED_CONF_MBED_CLIENT_DISABLE_DELAYED_RESPONSE
+#endif
+
+#ifdef YOTTA_CFG_DISABLE_BLOCK_MESSAGE
+#define DISABLE_BLOCK_MESSAGE YOTTA_CFG_DISABLE_BLOCK_MESSAGE
+#elif defined MBED_CONF_MBED_CLIENT_DISABLE_BLOCK_MESSAGE
+#define DISABLE_BLOCK_MESSAGE MBED_CONF_MBED_CLIENT_DISABLE_BLOCK_MESSAGE
+#endif
+
+#ifdef MBED_CONF_MBED_CLIENT_DTLS_PEER_MAX_TIMEOUT
+#define MBED_CLIENT_DTLS_PEER_MAX_TIMEOUT MBED_CONF_MBED_CLIENT_DTLS_PEER_MAX_TIMEOUT
+#endif
+
+
+#if defined (__ICCARM__)
+#define m2m_deprecated
+#else
+#define m2m_deprecated __attribute__ ((deprecated))
+#endif
+
+// This is valid for mbed-client-mbedtls
+// For other SSL implementation there
+// can be other
+
+/*
+*\brief A callback function for a random number
+* required by the mbed-client-mbedtls module.
+*/
+typedef uint32_t (*random_number_cb)(void) ;
+
+/*
+*\brief An entropy structure for an mbedtls entropy source.
+* \param entropy_source_ptr The entropy function.
+* \param p_source  The function data.
+* \param threshold A minimum required from the source before entropy is released
+*                  (with mbedtls_entropy_func()) (in bytes).
+* \param strong    MBEDTLS_ENTROPY_SOURCE_STRONG = 1 or
+*                  MBEDTSL_ENTROPY_SOURCE_WEAK = 0.
+*                  At least one strong source needs to be added.
+*                  Weaker sources (such as the cycle counter) can be used as
+*                  a complement.
+*/
+typedef struct mbedtls_entropy {
+    int     (*entropy_source_ptr)(void *, unsigned char *,size_t , size_t *);
+    void    *p_source;
+    size_t  threshold;
+    int     strong;
+}entropy_cb;
+
+#ifdef MBED_CLIENT_USER_CONFIG_FILE
+#include MBED_CLIENT_USER_CONFIG_FILE
+#endif
+
+#ifndef MBED_CLIENT_RECONNECTION_COUNT
+#define MBED_CLIENT_RECONNECTION_COUNT 3
+#endif
+
+#ifndef MBED_CLIENT_RECONNECTION_INTERVAL
+#define MBED_CLIENT_RECONNECTION_INTERVAL 5
+#endif
+
+#ifndef MBED_CLIENT_TCP_KEEPALIVE_TIME
+#define MBED_CLIENT_TCP_KEEPALIVE_TIME 600
+#endif
+
+#ifndef MBED_CLIENT_TCP_KEEPALIVE_INTERVAL
+#define MBED_CLIENT_TCP_KEEPALIVE_INTERVAL 75
+#endif
+
+#ifndef MBED_CLIENT_EVENT_LOOP_SIZE
+#define MBED_CLIENT_EVENT_LOOP_SIZE 1024
+#endif
+
+#ifndef SN_COAP_MAX_INCOMING_MESSAGE_SIZE
+#define SN_COAP_MAX_INCOMING_MESSAGE_SIZE UINT16_MAX
+#endif
+
+#ifndef MBED_CLIENT_DTLS_PEER_MAX_TIMEOUT
+#define MBED_CLIENT_DTLS_PEER_MAX_TIMEOUT 80000
+#endif
+
+#endif // M2MCONFIG_H