Toyomasa Watarai
Describes predefine macros for mbed online compiler (armcc)
Diff: mbed/TARGET_LPC1114/TARGET_NXP/TARGET_LPC11XX_11CXX/TARGET_LPC11XX/PinNames.h
- Revision:
- 6:40e873bbc5f7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_LPC1114/TARGET_NXP/TARGET_LPC11XX_11CXX/TARGET_LPC11XX/PinNames.h Thu Mar 16 21:58:09 2017 +0900
@@ -0,0 +1,234 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 12
+#define PIN_SHIFT 8
+
+typedef enum {
+ // LPC1114 Pin Names (PORT[15:12] + PIN[11:8] + IOCON offset[7:0])
+
+ P0_0 = (0 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x0c,
+ P0_1 = (0 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x10,
+ P0_2 = (0 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x1c,
+ P0_3 = (0 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x2c,
+ P0_4 = (0 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x30,
+ P0_5 = (0 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x34,
+ P0_6 = (0 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x4c,
+ P0_7 = (0 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x50,
+ P0_8 = (0 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x60,
+ P0_9 = (0 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x64,
+ P0_11 = (0 << PORT_SHIFT) | (11 << PIN_SHIFT) | 0x74,
+
+ P1_0 = (1 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x78,
+ P1_1 = (1 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x7c,
+ P1_2 = (1 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x80,
+ P1_4 = (1 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x94,
+ P1_5 = (1 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0xa0,
+ P1_6 = (1 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0xa4,
+ P1_7 = (1 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0xa8,
+ P1_8 = (1 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x14,
+ P1_9 = (1 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x38,
+ P1_10 = (1 << PORT_SHIFT) | (10 << PIN_SHIFT) | 0x6c,
+ P1_11 = (1 << PORT_SHIFT) | (11 << PIN_SHIFT) | 0x98,
+
+ P2_0 = (2 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x08,
+ P2_1 = (2 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x28,
+ P2_2 = (2 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x5c,
+ P2_3 = (2 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x8c,
+ P2_4 = (2 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x40,
+ P2_5 = (2 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x44,
+ P2_6 = (2 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x00,
+ P2_7 = (2 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x20,
+ P2_8 = (2 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x24,
+ P2_9 = (2 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x54,
+ P2_10 = (2 << PORT_SHIFT) | (10 << PIN_SHIFT) | 0x58,
+ P2_11 = (2 << PORT_SHIFT) | (11 << PIN_SHIFT) | 0x70,
+
+ P3_0 = (3 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x84,
+ P3_1 = (3 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x88,
+ P3_2 = (3 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x9c,
+ P3_3 = (3 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0xac,
+ P3_4 = (3 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x3c,
+ P3_5 = (3 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x48,
+
+ // mbed DIP Pin Names (CQ board)
+// p4 = P0_0,
+ p5 = P0_9,
+ p6 = P0_8,
+ p7 = P0_6,
+ p8 = P1_5,
+ p9 = P1_7,
+ p10 = P1_6,
+ p11 = P0_7,
+ p12 = P1_0,
+ p13 = P1_1,
+ p14 = P1_2,
+ p15 = P0_11,
+ p16 = P1_0,
+ p17 = P1_1,
+ p18 = P1_2,
+ p20 = P1_4,
+ p22 = P0_2,
+ p23 = P0_11,
+ p24 = P0_2,
+ p25 = P1_8,
+ p26 = P1_9,
+ p27 = P0_4,
+ p28 = P0_5,
+ p29 = P0_3,
+ p30 = P0_1,
+
+ // Other mbed Pin Names
+ LED1 = P1_5,
+ LED2 = P0_7,
+ LED3 = P1_5,
+ LED4 = P0_7,
+
+ USBTX = P1_7,
+ USBRX = P1_6,
+
+ // mbed DIP Pin Names (LPCXpresso LPC1114)
+// xp4 = P0_0,
+ xp5 = P0_9,
+ xp6 = P0_8,
+ xp7 = P2_11,
+ xp8 = P0_2,
+ xp9 = P1_7,
+ xp10 = P1_6,
+ xp11 = P0_7,
+ xp12 = P2_0,
+ xp13 = P2_1,
+ xp14 = P2_2,
+ xp15 = P0_11,
+ xp16 = P1_0,
+ xp17 = P1_1,
+ xp18 = P1_2,
+ xp20 = P1_4,
+ xp21 = P1_5,
+ xp22 = P1_8,
+ xp23 = P0_6,
+ xp25 = P3_0,
+ xp26 = P3_1,
+ xp27 = P3_2,
+
+ xp29 = P3_3,
+ xp30 = P2_10,
+ xp31 = P2_9,
+ xp32 = P2_8,
+ xp33 = P2_7,
+ xp34 = P2_6,
+ xp35 = P2_5,
+ xp36 = P2_4,
+ xp37 = P2_3,
+ xp38 = P1_11,
+ xp39 = P1_10,
+ xp40 = P1_9,
+ xp41 = P0_4,
+ xp42 = P0_5,
+ xp43 = P0_3,
+ xp44 = P0_1,
+
+ // Other mbed Pin Names
+ xLED1 = P0_7,
+
+ // DIP Package Names
+
+ dp1 = P0_8,
+ dp2 = P0_9,
+ dp4 = P0_11,
+ dp5 = P0_5,
+ dp6 = P0_6,
+ dp9 = P1_0,
+ dp10 = P1_1,
+ dp11 = P1_2,
+ dp13 = P1_4,
+ dp14 = P1_5,
+ dp15 = P1_6,
+ dp16 = P1_7,
+ dp17 = P1_8,
+ dp18 = P1_9,
+// dp23 = P0_0,
+ dp24 = P0_1,
+ dp25 = P0_2,
+ dp26 = P0_3,
+ dp27 = P0_4,
+ dp28 = P0_7,
+
+ dip1 = P0_8,
+ dip2 = P0_9,
+ dip4 = P0_11,
+ dip5 = P0_5,
+ dip6 = P0_6,
+ dip9 = P1_0,
+ dip10 = P1_1,
+ dip11 = P1_2,
+ dip13 = P1_4,
+ dip14 = P1_5,
+ dip15 = P1_6,
+ dip16 = P1_7,
+ dip17 = P1_8,
+ dip18 = P1_9,
+// dip23 = P0_0,
+ dip24 = P0_1,
+ dip25 = P0_2,
+ dip26 = P0_3,
+ dip27 = P0_4,
+ dip28 = P0_7,
+
+
+
+ // Not connected
+ NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+ CHANNEL0 = WAKEUP0_IRQn,
+ CHANNEL1 = WAKEUP1_IRQn,
+ CHANNEL2 = WAKEUP2_IRQn,
+ CHANNEL3 = WAKEUP3_IRQn,
+ CHANNEL4 = WAKEUP4_IRQn,
+ CHANNEL5 = WAKEUP5_IRQn,
+ CHANNEL6 = WAKEUP6_IRQn,
+ CHANNEL7 = WAKEUP7_IRQn
+} Channel;
+
+typedef enum {
+ PullUp = 2,
+ PullDown = 1,
+ PullNone = 0,
+ Repeater = 3,
+ OpenDrain = 4,
+ PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif