Revision 0:eaa7a09b51b3, committed 2016-03-02

Comitter:

MACRUM

Date:

Wed Mar 02 15:49:04 2016 +0000

Commit message:

Initial commit

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ADXL345_I2C.lib	Wed Mar 02 15:49:04 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/nimbusgb/code/ADXL345_I2C/#92fa975dab32

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Si114x.lib	Wed Mar 02 15:49:04 2016 +0000
@@ -0,0 +1,1 @@
+https://developer.mbed.org/users/Sissors/code/Si114x/#971d705818e7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Si7020.lib	Wed Mar 02 15:49:04 2016 +0000
@@ -0,0 +1,1 @@
+https://developer.mbed.org/users/kgills/code/Si7020/#eca9d19c17ab

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Wed Mar 02 15:49:04 2016 +0000
@@ -0,0 +1,66 @@
+/* Mpression Uzuki sensor shield test program
+ * Copyright (c) 2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ * 
+ *  Mpression Uzuki sensor shield test program
+ *
+ *  @author  Toyomasa Watarai
+ *  @version 1.0
+ *  @date    3-March-2016
+ *
+ *  http://www.m-pression.com/ja/solutions/boards/uzuki-shield?p_auth=P2omuceK&p_p_id=82&p_p_lifecycle=1&p_p_state=normal&p_p_mode=view&_82_struts_action=%2Flanguage%2Fview&languageId=en_US
+ *
+ *  ADXL345 : Accelerometer
+ *  Si7013  : Temperature & Humidity Sensor
+ *  Si1145  : Proximity, Luminescence & UV Level Sensor
+ *
+ */
+
+#include "mbed.h"
+#include "ADXL345_I2C.h"
+#include "Si7020.h"
+#include "Si114x.h"
+
+Serial pc(USBTX, USBRX);
+ADXL345_I2C adxl345(A4, A5);
+Si7020 si7013(A4, A5);
+Si114x si1145(A4, A5);
+
+int main() {
+    int buf[3];
+    float humid, temp;
+    float uv;
+
+    adxl345.setPowerControl(0x00);
+    adxl345.setDataFormatControl(0x0B);
+    adxl345.setDataRate(ADXL345_3200HZ);
+    adxl345.setPowerControl(0x08);
+    
+    while(si1145.verifyConnection() != 1);
+    
+    while(1) {
+        adxl345.getOutput(buf);
+        pc.printf("ax: %-5d, ay: %-5d, az: %-5d\n", (int16_t)buf[0], (int16_t)buf[1], (int16_t)buf[2]);
+
+        si7013.getHumidity(&humid);
+        si7013.getTemperature(&temp);
+        pc.printf("Humidity: %6.2f%%, Temperature: %6.2fC\n", humid, temp);
+        
+        uv = (float)si1145.getUVIndex()/100;
+        pc.printf("Vis: %d, IR: %d, UV: %6.3f\n", si1145.getVisibleLight(), si1145.getIRLight(), uv);
+        
+        pc.printf("\n");
+        wait(1);
+    }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Wed Mar 02 15:49:04 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/87f2f5183dfb
\ No newline at end of file