[SIMPLE PROGRAM] HYT humidity & temp sensor polling / showing received data at TFT with capacitive touchscreen

Dependencies:   FT800_2 HYT mbed

HYT humidity and temperature sensor polling & showing received data at TFT via graphical controller FT800/FT801.

Hardware

For documentation on the FT800 library, please refer to the library pages.

Connection

MCU-board to TFT-module

MCU-board is connected to TFT-module via Break Out Board. You need 6 signals to connect: SCK, MOSI and MISO are connected to a SPI channel, SS is the chip select signal, PD work as powerdown and INT for interrupts from TFT to MCU.

/media/uploads/Ksenia/4_-22-.jpg

You have to connect VDD to BLVDD at Break Out Board if you use the board:

/media/uploads/Ksenia/4_-5-.jpg

MCU-board to HYT sensor

MCU-board is connected to sensor via I2C. Remember to use pull-up resisrors there:

/media/uploads/Ksenia/freshpaint-20-2016.09.16-10.37.03.png

Подробнее в статьях Как перестать бояться и полюбить mbed [Часть 1 - 5] на https://habrahabr.ru/users/uuuulala/topics/

Committer:
Ksenia
Date:
Wed Oct 05 10:06:54 2016 +0000
Revision:
1:e20b5da0c912
Parent:
0:1f5444f2977d
Changed wrong comment in GetTouch function

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Ksenia 0:1f5444f2977d 1 http://mbed.org/users/mbed_official/code/mbed/builds/6c34061e7c34