Ksenia Kondrashova / Mbed 2 deprecated Temp_&_RH_at_TFT_with_touchscreen

[SIMPLE PROGRAM] HYT humidity & temp sensor polling / showing received data at TFT with capacitive touchscreen

Dependencies:   FT800_2 HYT mbed

HYT humidity and temperature sensor polling & showing received data at TFT via graphical controller FT800/FT801.

Hardware

For documentation on the FT800 library, please refer to the library pages.

Connection

MCU-board to TFT-module

MCU-board is connected to TFT-module via Break Out Board. You need 6 signals to connect: SCK, MOSI and MISO are connected to a SPI channel, SS is the chip select signal, PD work as powerdown and INT for interrupts from TFT to MCU.

/media/uploads/Ksenia/4_-22-.jpg

You have to connect VDD to BLVDD at Break Out Board if you use the board:

/media/uploads/Ksenia/4_-5-.jpg

MCU-board to HYT sensor

MCU-board is connected to sensor via I2C. Remember to use pull-up resisrors there:

/media/uploads/Ksenia/freshpaint-20-2016.09.16-10.37.03.png

Подробнее в статьях Как перестать бояться и полюбить mbed [Часть 1 - 5] на https://habrahabr.ru/users/uuuulala/topics/

TFT/display.DisplayListFunctions.cpp

Committer:
Ksenia
Date:
2016-10-05
Revision:
1:e20b5da0c912
Parent:
0:1f5444f2977d

File content as of revision 1:e20b5da0c912:

#include "display.h"

/**************************************************************************************************************************
************************** Start display list *****************************************************************************
**************************************************************************************************************************/
void Display::StartDL()
{
    (*_TFT).DLstart();
    // set white color for background
    (*_TFT).DL(CLEAR_COLOR_RGB(255, 255, 255));
    // clear buffers for preset values
    (*_TFT).DL(CLEAR(1, 1, 1));
}

/**************************************************************************************************************************
************************** Finish display list ****************************************************************************
**************************************************************************************************************************/
void Display::FinishDL()
{
    (*_TFT).DL(DISPLAY());
    // Swap the current display list
    (*_TFT).Swap();
    // Download the command list into fifo TFT
    (*_TFT).Flush_Co_Buffer();
    //  Wait for the complete consumption of FT800 Coprocessor commands
    (*_TFT).WaitCmdfifo_empty();
}