Ksenia Kondrashova / Mbed 2 deprecated Temp_&_RH_at_TFT_with_touchscreen

[SIMPLE PROGRAM] HYT humidity & temp sensor polling / showing received data at TFT with capacitive touchscreen

Dependencies:   FT800_2 HYT mbed

HYT humidity and temperature sensor polling & showing received data at TFT via graphical controller FT800/FT801.

Hardware

For documentation on the FT800 library, please refer to the library pages.

Connection

MCU-board to TFT-module

MCU-board is connected to TFT-module via Break Out Board. You need 6 signals to connect: SCK, MOSI and MISO are connected to a SPI channel, SS is the chip select signal, PD work as powerdown and INT for interrupts from TFT to MCU.

/media/uploads/Ksenia/4_-22-.jpg

You have to connect VDD to BLVDD at Break Out Board if you use the board:

/media/uploads/Ksenia/4_-5-.jpg

MCU-board to HYT sensor

MCU-board is connected to sensor via I2C. Remember to use pull-up resisrors there:

/media/uploads/Ksenia/freshpaint-20-2016.09.16-10.37.03.png

Подробнее в статьях Как перестать бояться и полюбить mbed [Часть 1 - 5] на https://habrahabr.ru/users/uuuulala/topics/

main.cpp

Committer:
Ksenia
Date:
2016-09-26
Revision:
0:1f5444f2977d

File content as of revision 0:1f5444f2977d:

#include "mbed.h"
#include "FT_Platform.h"
#include "HYT.h"
#include "display.h"

HYT SENSOR (PD6, PD7); // sda, scl [SLSTK3400A]
FT800 TFT (PE10, PE11, PE12, PE13, PB11, PD4); // mosi, miso, sck, ss, int, pd [SLSTK3400A]
//HYT SENSOR (D14, D15); // sda, scl [WIZwiki-W7500P]
//FT800 TFT (D11, D12, D13, D10, D9, D8); // mosi, miso, sck, ss, int, pd [WIZwiki-W7500P]
//HYT SENSOR (PA08, PA09); // sda, scl [ATSAMD21-XPRO]
//FT800 TFT (PA18, PA16, PA19, PA17, PA20, PA21); // mosi, miso, sck, ss, int, pd [ATSAMD21-XPRO]

Display disp(&TFT);

/**************************************************************************************************************************
************************** HYT sensor polling cycle ***********************************************************************
**************************************************************************************************************************/
void dataUpdate(void)
{
    SENSOR.MRCommand();
    wait_ms(100);
    SENSOR.DFCommand();
}

/**************************************************************************************************************************
************************** Main function **********************************************************************************
**************************************************************************************************************************/
int main()
{
    disp.Calibration();

    disp.activeScreen = MENU_SCREEN;
    disp.pressedButton = NONE_PRESS;

    // change active screen depending on pressed area
    while(1) {
        dataUpdate();
        disp.pressedButton = disp.GetTouch();

        // ----------------------------------------------------------------------------------------------
        // Main menu screen
        if (disp.activeScreen == MENU_SCREEN) {
            disp.MainMenu(SENSOR.humidity, SENSOR.temperature);
            if (disp.pressedButton) {
                wait_ms(150);
                if (disp.pressedButton == CURR_TEMP_PRESS) {
                    disp.activeScreen = CURR_TEMP_SCREEN;
                } else if (disp.pressedButton == CURR_HUM_PRESS) {
                    disp.activeScreen = CURR_HUM_SCREEN;
                } 
                disp.pressedButton = NONE_PRESS;
            }

        // ----------------------------------------------------------------------------------------------
        // Any other screen
        } else {
            // ----------------------------------------------------------------------------------------------
            // You can back to main menu from any screen
            if (disp.pressedButton == MENU_PRESS) {
                disp.pressedButton = NONE_PRESS;
                disp.activeScreen = MENU_SCREEN;
            } else {
                // ----------------------------------------------------------------------------------------------
                // Screen with current temperature / humidity
                if (disp.activeScreen == CURR_TEMP_SCREEN) {
                    disp.CurrentTemperature(SENSOR.temperature);
                } else if (disp.activeScreen == CURR_HUM_SCREEN) {
                    disp.CurrentHumidity(SENSOR.humidity);
                } 
            }
        }
    }
}