File content as of revision 219:2d3475d0dd1b:

/*****************************************************************************
 * $Id$
 *
 * Project:     NXP LPC1100 Secondary Bootloader Example
 *
 * Description: Provides access to In-Application Programming (IAP) routines
 *              contained within the bootROM sector of LPC1100 devices.
 *
 * Copyright(C) 2010, NXP Semiconductor
 * All rights reserved.
 *
 *****************************************************************************
 * Software that is described herein is for illustrative purposes only
 * which provides customers with programming information regarding the
 * products. This software is supplied "AS IS" without any warranties.
 * NXP Semiconductors assumes no responsibility or liability for the
 * use of the software, conveys no license or title under any patent,
 * copyright, or mask work right to the product. NXP Semiconductors
 * reserves the right to make changes in the software without
 * notification. NXP Semiconductors also make no representation or
 * warranty that such application will be suitable for the specified
 * use without further testing or modification.
 *****************************************************************************/
#ifndef __IAP_H
#define __IAP_H

#include <stdint.h>

/* IAP Command Status Codes */
#define IAP_STA_CMD_SUCCESS                                 0
#define IAP_STA_INVALID_COMMAND                             1
#define IAP_STA_SRC_ADDR_ERROR                              2
#define IAP_STA_DST_ADDR_ERROR                              3
#define IAP_STA_SRC_ADDR_NOT_MAPPED                         4
#define IAP_STA_DST_ADDR_NOT_MAPPED                         5
#define IAP_STA_COUNT_ERROR                                 6
#define IAP_STA_INVALID_SECTOR                              7
#define IAP_STA_SECTOR_NOT_BLANK                            8
#define IAP_STA_SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION     9
#define IAP_STA_COMPARE_ERROR                               10
#define IAP_STA_BUSY                                        11
#define IAP_STA_INVALD_PARAM                                12

/* Define the flash page size, this is the minimum amount of data can be written in one operation */
#define IAP_FLASH_PAGE_SIZE_BYTES                           256
#define IAP_FLASH_PAGE_SIZE_WORDS                           (IAP_FLASH_PAGE_SIZE_BYTES >> 2)
extern uint32_t u32Status;
void vIAP_ReinvokeISP(void);
uint32_t u32IAP_ReadPartID(uint32_t *pu32PartID);
uint32_t u32IAP_ReadBootVersion(uint32_t *pu32Major, uint32_t *pu32Minor);
uint32_t u32IAP_EraseSectors(uint32_t u32StartSector, uint32_t u32EndSector);
uint32_t u32IAP_PrepareSectors(uint32_t u32StartSector, uint32_t u32EndSector);
uint32_t u32IAP_CopyRAMToFlash(uint32_t u32DstAddr, uint32_t u32SrcAddr, uint32_t u32Len);
uint32_t u32IAP_BlankCheckSectors(uint32_t u32StartSector, uint32_t u32EndSector, uint32_t *pu32Result);
uint32_t u32IAP_Compare(uint32_t u32DstAddr, uint32_t u32SrcAddr, uint32_t u32Len, uint32_t *pu32Offset);
void u32IAP_ReadSerialNumber(uint32_t *pu32byte0, uint32_t *pu32byte1, uint32_t *pu32byte2, uint32_t *pu32byte3);

#endif /* end __IAP_H */
/*****************************************************************************
**                            End Of File
******************************************************************************/