Diff: cc3000_spi.h

Revision:

0:615c697c33b0

Child:

20:30b6ed7bf8fd

diff -r 000000000000 -r 615c697c33b0 cc3000_spi.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cc3000_spi.h	Thu Sep 19 07:55:14 2013 +0000
@@ -0,0 +1,251 @@
+/*****************************************************************************
+*
+*  C++ interface/implementation created by Martin Kojtal (0xc0170). Thanks to
+*  Jim Carver and Frank Vannieuwkerke for their inital cc3000 mbed port and
+*  provided help.
+*
+*  This version of "host driver" uses CC3000 Host Driver Implementation. Thus
+*  read the following copyright:
+*
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef CC3000_SPI_H
+#define CC3000_SPI_H
+
+typedef struct
+{
+   uint16_t tx_packet_length;
+   uint16_t rx_packet_length;
+   uint32_t spi_state;
+} tSpiInfo;
+
+
+/* ===========================================================================================
+                                              SPI
+   =========================================================================================== */
+#define READ                    3
+#define WRITE                   1
+
+#define HI(value)               (((value) & 0xFF00) >> 8)
+#define LO(value)               ((value) & 0x00FF)
+
+#define HEADERS_SIZE_EVNT    (SPI_HEADER_SIZE + 5)
+
+#define SPI_HEADER_SIZE      (5)
+
+#define  eSPI_STATE_POWERUP             (0)
+#define  eSPI_STATE_INITIALIZED         (1)
+#define  eSPI_STATE_IDLE                (2)
+#define  eSPI_STATE_WRITE_IRQ           (3)
+#define  eSPI_STATE_WRITE_FIRST_PORTION (4)
+#define  eSPI_STATE_WRITE_EOT           (5)
+#define  eSPI_STATE_READ_IRQ            (6)
+#define  eSPI_STATE_READ_FIRST_PORTION  (7)
+#define  eSPI_STATE_READ_EOT            (8)
+
+// The magic number that resides at the end of the TX/RX buffer (1 byte after the allocated size)
+// for the purpose of detection of the overrun. The location of the memory where the magic number
+// resides shall never be written. In case it is written - overrun occured and either recevie function
+// or send function will be stuck forever.
+#define CC3000_BUFFER_MAGIC_NUMBER (0xDE)
+
+/* ===========================================================================================
+                                              HCI
+   =========================================================================================== */
+
+#define SL_PATCH_PORTION_SIZE                        (1000)
+
+#define SPI_HEADER_SIZE                              (5)
+#define SIMPLE_LINK_HCI_CMND_HEADER_SIZE             (4)
+#define HEADERS_SIZE_CMD                             (SPI_HEADER_SIZE + SIMPLE_LINK_HCI_CMND_HEADER_SIZE)
+#define SIMPLE_LINK_HCI_DATA_CMND_HEADER_SIZE        (5)
+#define SIMPLE_LINK_HCI_DATA_HEADER_SIZE             (5)
+#define SIMPLE_LINK_HCI_PATCH_HEADER_SIZE            (2)
+
+// Values that can be used as HCI Commands and HCI Packet header defines
+#define  HCI_TYPE_CMND          0x1
+#define  HCI_TYPE_DATA          0x2
+#define  HCI_TYPE_PATCH         0x3
+#define  HCI_TYPE_EVNT          0x4
+
+
+#define HCI_EVENT_PATCHES_DRV_REQ             (1)
+#define HCI_EVENT_PATCHES_FW_REQ              (2)
+#define HCI_EVENT_PATCHES_BOOTLOAD_REQ        (3)
+
+
+#define  HCI_CMND_WLAN_BASE                              (0x0000)
+#define  HCI_CMND_WLAN_CONNECT                            0x0001
+#define  HCI_CMND_WLAN_DISCONNECT                         0x0002
+#define  HCI_CMND_WLAN_IOCTL_SET_SCANPARAM                0x0003
+#define  HCI_CMND_WLAN_IOCTL_SET_CONNECTION_POLICY        0x0004
+#define  HCI_CMND_WLAN_IOCTL_ADD_PROFILE                  0x0005
+#define  HCI_CMND_WLAN_IOCTL_DEL_PROFILE                  0x0006
+#define  HCI_CMND_WLAN_IOCTL_GET_SCAN_RESULTS             0x0007
+#define  HCI_CMND_EVENT_MASK                              0x0008
+#define  HCI_CMND_WLAN_IOCTL_STATUSGET                    0x0009
+#define  HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_START          0x000A
+#define  HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_STOP           0x000B
+#define  HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_SET_PREFIX     0x000C
+#define  HCI_CMND_WLAN_CONFIGURE_PATCH                    0x000D
+
+
+#define  HCI_CMND_SOCKET_BASE          0x1000
+#define  HCI_CMND_SOCKET               0x1001
+#define  HCI_CMND_BIND                 0x1002
+#define  HCI_CMND_RECV                 0x1004
+#define  HCI_CMND_ACCEPT               0x1005
+#define  HCI_CMND_LISTEN               0x1006
+#define  HCI_CMND_CONNECT              0x1007
+#define  HCI_CMND_BSD_SELECT           0x1008
+#define  HCI_CMND_SETSOCKOPT           0x1009
+#define  HCI_CMND_GETSOCKOPT           0x100A
+#define  HCI_CMND_CLOSE_SOCKET         0x100B
+#define  HCI_CMND_RECVFROM             0x100D
+#define  HCI_CMND_GETHOSTNAME          0x1010
+#define  HCI_CMND_MDNS_ADVERTISE       0x1011
+
+
+#define HCI_DATA_BASE                                0x80
+
+#define HCI_CMND_SEND                               (0x01 + HCI_DATA_BASE)
+#define HCI_CMND_SENDTO                             (0x03 + HCI_DATA_BASE)
+#define HCI_DATA_BSD_RECVFROM                       (0x04 + HCI_DATA_BASE)
+#define HCI_DATA_BSD_RECV                           (0x05 + HCI_DATA_BASE)
+
+
+#define HCI_CMND_NVMEM_CBASE        (0x0200)
+
+
+#define HCI_CMND_NVMEM_CREATE_ENTRY (0x0203)
+#define HCI_CMND_NVMEM_SWAP_ENTRY   (0x0205)
+#define HCI_CMND_NVMEM_READ         (0x0201)
+#define HCI_CMND_NVMEM_WRITE        (0x0090)
+#define HCI_CMND_NVMEM_WRITE_PATCH  (0x0204)
+#define HCI_CMND_READ_SP_VERSION    (0x0207)
+
+#define  HCI_CMND_READ_BUFFER_SIZE  0x400B
+#define  HCI_CMND_SIMPLE_LINK_START 0x4000
+
+#define HCI_CMND_NETAPP_BASE        0x2000
+
+#define HCI_NETAPP_DHCP                    (0x0001 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_PING_SEND               (0x0002 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_PING_REPORT             (0x0003 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_PING_STOP               (0x0004 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_IPCONFIG                (0x0005 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_ARP_FLUSH               (0x0006 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_SET_DEBUG_LEVEL         (0x0008 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_SET_TIMERS              (0x0009 + HCI_CMND_NETAPP_BASE)
+
+// Values that can be used as HCI Events defines
+#define  HCI_EVNT_WLAN_BASE     0x0000
+#define  HCI_EVNT_WLAN_CONNECT  0x0001
+#define  HCI_EVNT_WLAN_DISCONNECT \
+                                0x0002
+#define  HCI_EVNT_WLAN_IOCTL_ADD_PROFILE  \
+                                0x0005
+
+
+#define  HCI_EVNT_SOCKET              HCI_CMND_SOCKET
+#define  HCI_EVNT_BIND                HCI_CMND_BIND
+#define  HCI_EVNT_RECV                HCI_CMND_RECV
+#define  HCI_EVNT_ACCEPT              HCI_CMND_ACCEPT
+#define  HCI_EVNT_LISTEN              HCI_CMND_LISTEN
+#define  HCI_EVNT_CONNECT             HCI_CMND_CONNECT
+#define  HCI_EVNT_SELECT              HCI_CMND_BSD_SELECT
+#define  HCI_EVNT_CLOSE_SOCKET        HCI_CMND_CLOSE_SOCKET
+#define  HCI_EVNT_RECVFROM            HCI_CMND_RECVFROM
+#define  HCI_EVNT_SETSOCKOPT          HCI_CMND_SETSOCKOPT
+#define  HCI_EVNT_GETSOCKOPT          HCI_CMND_GETSOCKOPT
+#define  HCI_EVNT_BSD_GETHOSTBYNAME   HCI_CMND_GETHOSTNAME
+#define  HCI_EVNT_MDNS_ADVERTISE      HCI_CMND_MDNS_ADVERTISE
+
+#define  HCI_EVNT_SEND                0x1003
+#define  HCI_EVNT_WRITE               0x100E
+#define  HCI_EVNT_SENDTO              0x100F
+
+#define HCI_EVNT_PATCHES_REQ          0x1000
+
+#define HCI_EVNT_UNSOL_BASE           0x4000
+
+#define HCI_EVNT_WLAN_UNSOL_BASE     (0x8000)
+
+#define HCI_EVNT_WLAN_UNSOL_CONNECT             (0x0001 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_UNSOL_DISCONNECT          (0x0002 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_UNSOL_INIT                (0x0004 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_TX_COMPLETE               (0x0008 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_UNSOL_DHCP                (0x0010 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_ASYNC_PING_REPORT         (0x0040 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE  (0x0080 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_KEEPALIVE                 (0x0200  + HCI_EVNT_WLAN_UNSOL_BASE)
+#define    HCI_EVNT_BSD_TCP_CLOSE_WAIT          (0x0800 + HCI_EVNT_WLAN_UNSOL_BASE)
+
+#define HCI_EVNT_DATA_UNSOL_FREE_BUFF \
+                                0x4100
+
+#define HCI_EVNT_NVMEM_CREATE_ENTRY \
+                                HCI_CMND_NVMEM_CREATE_ENTRY
+#define HCI_EVNT_NVMEM_SWAP_ENTRY HCI_CMND_NVMEM_SWAP_ENTRY
+
+#define HCI_EVNT_NVMEM_READ     HCI_CMND_NVMEM_READ
+#define HCI_EVNT_NVMEM_WRITE    (0x0202)
+
+#define HCI_EVNT_READ_SP_VERSION      \
+                HCI_CMND_READ_SP_VERSION
+
+#define  HCI_EVNT_INPROGRESS    0xFFFF
+
+
+#define HCI_DATA_RECVFROM       0x84
+#define HCI_DATA_RECV           0x85
+#define HCI_DATA_NVMEM          0x91
+
+#define HCI_EVENT_CC3000_CAN_SHUT_DOWN 0x99
+
+// Prototypes for the structures for HCI APIs.
+#define HCI_DATA_HEADER_SIZE        (5)
+#define HCI_EVENT_HEADER_SIZE       (5)
+#define HCI_DATA_CMD_HEADER_SIZE    (5)
+#define HCI_PATCH_HEADER_SIZE       (6)
+
+#define HCI_PACKET_TYPE_OFFSET      (0)
+#define HCI_PACKET_ARGSIZE_OFFSET   (2)
+#define HCI_PACKET_LENGTH_OFFSET    (3)
+
+
+#define HCI_EVENT_OPCODE_OFFSET     (1)
+#define HCI_EVENT_LENGTH_OFFSET     (3)
+#define HCI_EVENT_STATUS_OFFSET     (4)
+#define HCI_DATA_LENGTH_OFFSET      (3)
+
+#endif